5977
RK-HHP
Handheld Programmer - User Guide
The RK-HHP is a handheld programmer for use
with Radio Key® standalone access control units:
RK-65K, RK-65KS, RK600e and RK-100M. The RK-HHP
can be used in place of the RK-PD1 program card
deck. Simply hold the RK-HHP in front of, and
parallel to the access control unit and press the
numeral and function keys for each programming
step. Each key press should result in a beep from
the access control unit.
The RK-HHP uses passive RFID technology. There are no
batteries to change and it is not necessary to “aim” the
programmer at a particular part of the access control unit.
For your convenience, two peel-and-stick quick-guides
have been provided. You may attach one of these guides
to the back of the RK-HHP for easy reference. For
complete programming instructions, see the manual
provided with the access control unit.
Note: the programming instructions for the
RK-65K and RK-65KS are different than those
for the RK-600e and RK100M.
PHONE: (818) 882-0020 yFAX: (818) 882-7052
TOLL FREE: (800) 891-0020
Web site: www.securakey.com
3321936 5977
RK-HHP
Handheld Programmer - User Guide
The RK-HHP is a handheld programmer for use
with Radio Key® standalone access control units:
RK-65K, RK-65KS, RK600e and RK-100M. The RK-HHP
can be used in place of the RK-PD1 program card
deck. Simply hold the RK-HHP in front of, and
parallel to the access control unit and press the
numeral and function keys for each programming
step. Each key press should result in a beep from
the access control unit.
The RK-HHP uses passive RFID technology. There are no
batteries to change and it is not necessary to “aim” the
programmer at a particular part of the access control unit.
For your convenience, two peel-and-stick quick-guides
have been provided. You may attach one of these guides
to the back of the RK-HHP for easy reference. For
complete programming instructions, see the manual
provided with the access control unit.
Note: the programming instructions for the
RK-65K and RK-65KS are different than those
for the RK-600e and RK100M.
PHONE: (818) 882-0020 yFAX: (818) 882-7052
TOLL FREE: (800) 891-0020
Web site: www.securakey.com
3321936
5977
RK-HHP
Handheld Programmer - User Guide
The RK-HHP is a handheld programmer for use
with Radio Key® standalone access control units:
RK-65K, RK-65KS, RK600e and RK-100M. The RK-HHP
can be used in place of the RK-PD1 program card
deck. Simply hold the RK-HHP in front of, and
parallel to the access control unit and press the
numeral and function keys for each programming
step. Each key press should result in a beep from
the access control unit.
The RK-HHP uses passive RFID technology. There are no
batteries to change and it is not necessary to “aim” the
programmer at a particular part of the access control unit.
For your convenience, two peel-and-stick quick-guides
have been provided. You may attach one of these guides
to the back of the RK-HHP for easy reference. For
complete programming instructions, see the manual
provided with the access control unit.
Note: the programming instructions for the
RK-65K and RK-65KS are different than those
for the RK-600e and RK100M.
PHONE: (818) 882-0020 yFAX: (818) 882-7052
TOLL FREE: (800) 891-0020
Web site: www.securakey.com
3321936 5977
RK-HHP
Handheld Programmer - User Guide
The RK-HHP is a handheld programmer for use
with Radio Key® standalone access control units:
RK-65K, RK-65KS, RK600e and RK-100M. The RK-HHP
can be used in place of the RK-PD1 program card
deck. Simply hold the RK-HHP in front of, and
parallel to the access control unit and press the
numeral and function keys for each programming
step. Each key press should result in a beep from
the access control unit.
The RK-HHP uses passive RFID technology. There are no
batteries to change and it is not necessary to “aim” the
programmer at a particular part of the access control unit.
For your convenience, two peel-and-stick quick-guides
have been provided. You may attach one of these guides
to the back of the RK-HHP for easy reference. For
complete programming instructions, see the manual
provided with the access control unit.
Note: the programming instructions for the
RK-65K and RK-65KS are different than those
for the RK-600e and RK100M.
PHONE: (818) 882-0020 yFAX: (818) 882-7052
TOLL FREE: (800) 891-0020
Web site: www.securakey.com
3321936
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
SoundCraft RK-65K User manual
-
Munters Green RTU RX Module Programming R1.1 User manual
-
Stealth Products P06D532R3 User manual
-
-
Dynamic DX User manual
-
GE Universal Remote GFK-0804B User manual
-
-
-
Hand Held Products 7200/UG User manual
-
Hand Held Products Dolphin 7200 User manual
