GREENLUX Chain GLM25 LED Linear Light User manual

  • Hello! I've reviewed the user manual for the Greenlux Chain GLM25 Surface Mounted Light. It outlines the steps for installation, including measuring clip distances and rotating the clips for fixing the light profile. I'm ready to answer any questions you might have about the device and the guide itself.
  • What should be done before installing the light?
    What is the next step after opening the power line hole?
    How to fix the light profile?
Measure the distance L between the clips, lock the rotating clip, and open the
power line hole of the ceiling at the same time.
1
Align the clip position and pass the power line
through the power line hole at the same time.
2
After the profile is close to the clip,
rotate the clip to fix the profile.
3
After the installation is completed,
the lamp can be turned on when it is powered on.
4
L
37 Chelmsford Street, Williamstown North VIC 3016 Australia Phone: 1300 650 625
Greenlux greenluxlighting GreenluxLED
[email protected]Email: Facebook: Twitter:
engineered to perform
Surface Mounted: Chain GLM25
User Manual
/