TRIDON TOLEDO Vernier Caliper User manual

Brand: TRIDON

Model: TOLEDO Vernier Caliper

Type: User manual

Bluetooth

Vernier Caliper

Digital Metric & Imperial 150mm/6”

User Guide

322400 MAN © Copyright TRIDON AUSTRALIA PTY. LTD. 2016

A.C.N. 001 398 698 Reproduction of this manual in part or full is not permitted without written approval. Illustrations in this manual are

for identiﬁcation purposes only and there may be slight variations between the illustration and actual product. Whilst every effort has

been made to ensure that the information contained in this catalogue is accurate at the time of printing, TRIDON AUSTRALIA PTY LTD will

not accept responsibility should any inaccuracies be contained herein.

General Overview

Congratulations on your purchase of the Toledo Bluetooth

Vernier Caliper. This precision instrument

features the most modern technology with in-built Bluetooth

4.0 transmitter.

This Digital Vernier Caliper can be used in conjunction with the Toledo Bluetooth

software and

receiving dongle or app to enable complete wireless connectivity with PC, Android and iOS systems.

Additional Information

Maintenance

• Always keep the Vernier Caliper in a dry

environment and locked in its designated

storage case when not in use. To protect

against rust.

• Do not close the measuring spindle with the

anvil when not in use. Keep an open distance of

1-2 mm

• Do not use aggressive products (alcohol,

trichloroethylene or others) to clean the

plastic parts

• Do not keep the micrometer in places exposed

to sun, heat or humidity.

• Important: Dry the instrument thoroughly after

exposure to moisture. This will guarantee

correct performance and operation

SWISS MADE

ﬁ

• Precision instrument with built-in Bluetooth

wireless technology to enable direct data output to synchronised

devices E.g. PC, Smart Phone, Tablet

• Water protected for heavy-duty work with coolants and lubricants, protection rating IP67 according to IEC 60529

• Extra-large and bright digital display

• Auto wake up and Auto off functions

• Wireless transmission range up to 15m

• Maximum error: 20µm

• Powered by standard CR2032 button cell battery (3 years life per battery)

• Supplied in heavy duty storage case with foam insert and ﬁrm locking clip

• Bluetooth

software sold separately

• Made in Switzerland

TOLEDO IS A REGISTERED

TRIDON BRAND

Battery Infromation

• The display of the symbol indicates low

battery power and battery replacement is

required.

To replace battery:

322400

Battery (CR2032) Data/Favourite Button

Mode Button Set Button

Thumbwheel

Bluetooth

Speciﬁcations

Measuring Range 150mm/6"

Resolution 0.01mm/0.0005"

Maximum Error

100mm: 20µm

100-300mm: 30µm (DIN862)

Repeatability 10µm/0.0005"

Maximum Slider

Speed

2.5m per Sec/100" per Sec

Display Refresh Rate > 10 Seconds

Data Output Bluetooth

4.0 2.4Ghz

Mean Power

Consumption

45µA

Battery Life

Bluetooth® OFF: 8000h

Bluetooth® ON: See Autonomy

Working Temperature +5°C to +40°C

Storage Temperature -10°C to +60°C

Weight 175g

IP Speciﬁcation IP 67 (IEC60529)

Radio Frequency 2.4 Ghz

Robustness FHSS

Latency < 6ms

Bluetooth

Speciﬁcations

Range:

Open Space: ≤ 15m

Industrial

Environment:

1 - 5m

Autonomy:

Continuous

Up to 2 months (always connected

with 4 values)

Saver

Up to 5 months (this instrument

sends value only when the

position has changed)

Blind/Push

Up to 7 months (value is sent

from the instrument (button) or

requested from the computer)

For further technical information please contact Tridon Customer Service on 1300 362 263

[MODE] Button

• Enables the selection of the different menus (each key stroke activates the next menu)

[SET] Button

• Enables the activation of a function assigned to the corresponding selected menu

[DATA] Button

• Enables the transmission of data to connected devices via Bluetooth

4.0 transmitter

Start/Switching ON

• To start, press [MODE] or [SET]

Switching OFF

• The instrument can be switched off completely for a long period of non-use, but this

will result in zero reset and all data will be lost. To fully switch off the instrument

press and hold [SET] untill «OFF» appears

Standby Mode

• Standby mode is activated automatically after 20 minutes of inactivity

(unless automatic switch-off mode has been turned off)

• Standby mode is a state of reduced consumption without loss of the reference

position. It can also be activated by pressing the [SET] button until the display

disappears

• The instrument awakes automatically when it detects movement from the jaws, push

of a button or when requesting Data.

Reinitialising Instrument (Re-Setting)

• The initial instrument setting can be restored at any time by a prolonged press (>4sec)

simultaneously on [MODE] or [SET] untill the message rESEt is displayed

Favourite settings

• Favourite settings give direct access to a predeﬁned function. Favourite

functions enable the user to conﬁgure the instrument according to their

needs. In order to access a favourite function the instrument must ﬁrst be

unlocked by a prolonged press on the [MODE] Button.

1. SEt (False Zero): Zero setting at a deﬁned point

2. Unit (Metric or Imperial): Unit of measurement selection

3. PrE (Pre-Set Values): Pre-setting of deﬁned reading/value

4. bt (Wireless Bluetooth Connection): Wireless data transmission between

instrument and device

Wireless Technology

Toledo Bluetooth

precision instruments feature

an in-built Bluetooth® 4.0 transmitter to enable

complete wireless data transmission between

instrument and device. No additional attachments

are required to enable Bluetooth

connectivity,

but associated software and receiving dongle is

needed (sold separately)

To activate Bluetooth

Press the [MODE] button

until «BT» appears on the screen. Then press the

[SET] button to activate or deactivate the function

or to perform a reset of the connection, then press

[MODE] button to validate. A third menu allows

you to read the MAC (Bluetooth

) address.

The Bluetooth

connection procedure has

3 states:

1. Symbol

off - Disconnected Mode

2. Symbol

blinking - Advertising Mode

3. Symbol

on - Connected Mode

Connection

1. Activate Bluetooth

Smart compatible software

and hardware/App either on your PC, Tablet or

smartphone

2. Start the instrument. By default the Bluetooth

module is active and the instrument is available

for connection for 120s (Advertising Mode)

3. As soon as the device is detected, a connection

is established automatically. If no connection

is established during 120s, reactivate the

Bluetooth

module using the bt/On menu.

4. Instrument is ready to communicate

(connected mode)

Pairing

Pairing with the master is automatically done at

ﬁrst connection.

To connect the instrument to a new master

(new pairing), it is necessary to clear all pairing

information on the instrument using the bt/rESEt

menu.

Menu System & FunctionsInstructions for Use

• Press the [DATA] button to access the

range of favourite settings

• To exit favourite settings and lock

the instrument requires a prolonged

press on the (DATA) button.

Data transmission

(default)

Hold display

Zero reset

Recall Preset

• To avoid a wrong action, each menu is active only for 5s. When this period is

passed, the instrument switches automatically back to «Measuring Mode» as

long as no action has been performed to the [MODE] or [SET] button

TRIDON TOLEDO Vernier Caliper User manual

Brand: TRIDON

Model: TOLEDO Vernier Caliper

Type: User manual

Download PDF

report

TRIDON TOLEDO Vernier Caliper User manual

TRIDON TOLEDO Vernier Caliper User manual

Other documents