Matco Tools DTTDG402A Digital Tire Tread Depth Gauge Operating instructions
- Type
- Operating instructions
1
2-—
3
4
-5
6
7-
1
2-—
3
4
-5
7-
Parts:
1. Function keys 2. LCD display
3. Base 4. Measuring Rod
5. Battery compartment
Description:
� measuring range: 0-1”/0-25mm
�Reading: 0.0005” / 0.01mm / 1/32inch
�Accuracy: 0-1”/0.001”
�Battery: 3V CR2032 Lithium battery
Item# DTTDG402A
*Setting Zero
1
2
3
4
5
Operation:
1. ON/0: Press button to turn the unit on, press it again to set zero*.
2. in/mm/F: Press in/mm button to switch readings among: inch, inch
fraction (32nd ), and mm.
3. HOLD: Press once to hold the reading; press again to release.
Press and hold the gauge on a flat surface
and press NO/0 button to set zero.
1
2-—
3
4
-5
6
7-
1
2-—
3
4
-5
7-
Parts:
1. Function keys 2. LCD display
3. Base 4. Measuring Rod
5. Battery compartment
Description:
�Electronic indicator measuring range 0-1”
�Digital Depth gauge measuring range: 0-16”
�Reading: 0.0005” / 0.01mm / 1/128inch
�Accuracy: 0-1”/0.001”
�Battery: 3V CR2032 Lithium battery
Item# DTTDG402A
*Setting Zero
1
2
3
4
5
Operation:
1. ON/0: Press button to turn the unit on, press it again to set zero*.
2. in/mm/F: Press in/mm button to switch readings among: inch, inch
fraction (32nd ), and mm.
3. HOLD: Press once to hold the reading; press again to release.
Press and hold the gauge on a flat surface
and press NO/0 button to set zero.
1
2-—
3
4
-5
6
7-
1
2-—
3
4
-5
7-
Parts:
1. Function keys 2. LCD display
3. Base 4. Measuring Rod
5. Battery compartment
Description:
�Electronic indicator measuring range 0-1”
�Digital Depth gauge measuring range: 0-16”
�Reading: 0.0005” / 0.01mm / 1/128inch
�Accuracy: 0-1”/0.001”
�Battery: 3V CR2032 Lithium battery
Item# DTTDG402A
*Setting Zero
1
2
3
4
5
Operation:
1. ON/0: Press button to turn the unit on, press it again to set zero*.
2. in/mm/F: Press in/mm button to switch readings among: inch, inch
fraction (32nd ), and mm.
3. HOLD: Press once to hold the reading; press again to release.
Press and hold the gauge on a flat surface
and press NO/0 button to set zero.
Operation:
1. Press the Power button to turn the unit on or off
2. in/mm/F: Press in/mm button to switch readings among: inch, inch fraction,
and mm.
3. Zero: Use one hand to hold the gauge down on a flat surface; use the other
hand to press Zero button to set zero.
4. HOLD: Press once to hold the reading; press again to release.
1
2-—
3
4
-5
7-
8
1
2-—
3
4
5-
1
2-—
3
4
-5 6
7-
1
2-—
3
4
-5
7-
Parts:
1. Function keys 2. LCD display
3. Base 4. Measuring Rod
5. Battery compartment
Description:
�Electronic indicator measuring range 0-1”
�Digital Depth gauge measuring range: 0-16”
�Reading: 0.0005” / 0.01mm / 1/128inch
�Accuracy: 0-1”/0.001”
�Battery: 3V CR2032 Lithium battery
* Setting Zero
Operation:
1. Press the Power button to turn the unit on or off
2. in/mm/F: Press in/mm button to switch readings among: inch, inch fraction,
and mm.
3. Zero: Use one hand to hold the gauge down on a flat surface; use the other
hand to press Zero button to set zero.
4. HOLD: Press once to hold the reading; press again to release.
1
2-—
3
4
-5
7-
8
1
2-—
3
4
5-
1
2-—
3
4
-5 6
7-
1
2-—
3
4
-5
7-
Parts:
1. Function keys 2. LCD display
3. Base 4. Measuring Rod
5. Battery compartment
Description:
�Electronic indicator measuring range 0-1”
�Digital Depth gauge measuring range: 0-16”
�Reading: 0.0005” / 0.01mm / 1/128inch
�Accuracy: 0-1”/0.001”
�Battery: 3V CR2032 Lithium battery
Item# DTTDG402
* Setting Zero
Item# DTTDG402
-
1
-
2
Matco Tools DTTDG402A Digital Tire Tread Depth Gauge Operating instructions
- Type
- Operating instructions
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Draper Dual Reading Digital Vernier Caliper, 0 - 200mm/0 - 9" Operating instructions
-
Kennedy CDC300 User manual
-
-
CEN-TECH 47257 Operating Instructions Manual
-
Traceable 3415 Owner's manual
-
-
sauter TU-US User manual
-
-
-
