1. Open the back cover with screwdriver, insert a SIM card with GPRS/GSM/SMS
network into the slot, and make sure the chip side is down. Refer to Picture 1
2. Plug the battery and GPS tracker will automatically turn on. The two LED
indicators turn on. Refer to Picture 2.
3. Close batter cover and tighten screws. Make sure the light-through hole is at right
position with the light sensor. Refer to Picture 3 and Picture 4.
4. With strong magnet, user can put the GPS tracker at any metal place.
4 SMS Operation Instruction
4.1 Set Admin phone number
Message format: admin+123456+space+TEL
e.g. admin123456 13800000000
Reply: admin ok
Delete admin Number
Message format: noadmin+123456+space+TEL,
e.g. noadmin123456 13800000000,
Reply: noadmin ok
When admin number calls device SIM, device will return current location, GPS
valid(V:A) or invalid (V:V), time, speed, battery state, ID, SIM operator, and GSM
base location information. As below :
http://maps.google.com/maps?q=22.68375%2c113.93973 V:A,2015-03-29 17:18:04
S:000km/h,Bat:6,4209800875,S25G00;p:46000, l:10352, c:4293