2. New Classic FURNITURE
  3. Andover

New Classic FURNITURE Andover Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the New Classic Furniture Andover series bed components, including models B677W-315, B677W-335, B677W-415, B677W-535, B677B-315, B677B-335, B677B-415, and B677B-535. The document provides detailed steps for assembling the headboard, footboard, side rails, and slats. It also provides a parts list and hardware list as well as a reminder to periodically tighten all screws. I'm ready to answer any questions you might have about the assembly process.
  • What should I do before assembly?
    What hardware is required for assembling the leg posts to the headboard?
    Which tool is required to assemble?
    How often should I check and tighten the screws?
NOTE:MUST TIGHTEN SCREW PERIODICALLY.WITH USE SCREWS WILL
BECOME LOOSE CHECK THIGHT OF ALL SREWS EVERY 6-8 WEEKS. MADE IN MALAYSIA
STEP 1
COMPLETED
ASSEMBLY
3
L
4R
A+B+C
1
Thank you for purchasing this quality product. Be sure to check all packing materials carefully for small parts, which
may have come loose inside the carton during shipment. Identify and count all items and compare with the parts list
and/or hardware list shown below.
A+B+C
A+B+C
A+B+C
BACK VIEW
A+B+C
D
4x
Screw Driver is not included
PARTS LIST
ITEM DRAWING DESCRIPTION QTY
1HEAD
BOARD 1 PC
2FOOT
BOARD
SLATS
SUPPORT
7WOODEN
SLAT
SIDE RAILS
A
C.S.K SCREW
(M4) 4 x32mm
HARDWARD LIST
ITEM DRAWING DESCRIPTION QTY
HB LEG
POST (L)
3
5
6
1 PC
2 PCS
4 PCS
4 PCS
8 PCS
HB LEG
POST (R)
1 PC
1 PC4
B
4 PCS
C
Spring Washer
M8 x22mm 4 PCS
D
Flat Washer
M8 x 16 x 1.6mm 4 PCS
E
1 PC
JCBB (M8)
8 x 35MM (NYLOK)
ALLEN KEY M5
5 x 35 x120MM
PAGE 1 OF 2
ASSEMBLY INSTRUCTIONS
B677W-315 ANDOVER 5/ 0 Q HEADBOARD, FOOTBOARD & SLATS-WHITE
B677W-335 ANDOVER 5/ 0-6 /6 Q/EK SIDE RAILS-WHITE
B677B-315 ANDOVER 5/ 0 Q HEADBOARD, FOOTBOARD & SLATS-NUTMEG
B677B-335 ANDOVER 5/ 0-6 /6 Q/EK SIDE RAILS-NUTMEG
&
B677W-415 ANDOVER 4/6 F HEADBOARD, FOOTBOARD & SLATS-WHITE
B677W-535 ANDOVER 3/ 3-4 /6 T/F SIDE RAILS-WHITE
B677B-415 ANDOVER 4/6 F HEADBOARD, FOOTBOARD & SLATS-NUTMEG
B677B-535 ANDOVER 3/ 3-4 /6 T/F SIDE RAILS-NUTMEG
Step 1: Attach and tighten the leg
posts (3 & 4) to the head board (1)
by inserting JCBB bolt (A) with
washers (B & C).
ASSEMBLY INSTRUCTIONS
NOTE:MUST TIGHTEN SCREW PERIODICALLY.WITH USE SCREWS WILL
BECOME LOOSE CHECK THIGHT OF ALL SREWS EVERY 6-8 WEEKS. MADE IN MALAYSIA
STEP 2
COMPLETED
ASSEMBLY
STEP 3
1
2
3
Important !!
LEVEL THE SIDE RAIL BY
COVERING WITH A SOFT CLOTH
AND TAPPING WITH A HAMMER.
Press laterally into
the groove and
drop down.
7
64
Affix the Bottom
Rail Support (6) to
Wooden Slat (7) as
Shown.
Affix the Side Rail (5) to
the Wooden Slat (7) using
the CSK screw (E) and a
screwdriver.
E
55
7
5
2
B677W-315 ANDOVER 5/ 0 Q HEADBOARD, FOOTBOARD & SLATS-WHITE
B677W-335 ANDOVER 5/ 0-6 /6 Q/EK SIDE RAILS-WHITE
B677B-315 ANDOVER 5/ 0 Q HEADBOARD, FOOTBOARD & SLATS-NUTMEG
B677B-335 ANDOVER 5/ 0-6 /6 Q/EK SIDE RAILS-NUTMEG
&
PAGE 2 OF 2
B677W-415 ANDOVER 4/6 F HEADBOARD, FOOTBOARD & SLATS-WHITE
B677W-535 ANDOVER 3/ 3-4 /6 T/F SIDE RAILS-WHITE
B677B-415 ANDOVER 4/6 F HEADBOARD, FOOTBOARD & SLATS-NUTMEG
B677B-535 ANDOVER 3/ 3-4 /6 T/F SIDE RAILS-NUTMEG
14
3
5
14
3
2
7
6
/