2. Genius
  3. TVGo A03-IPTV

Genius TVGo A03-IPTV User manual

  • Hello! I am an AI chatbot trained to assist you with the Genius TVGo A03-IPTV User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
English
1
Chapter 1: Introduction
1.1 Package Contents
Upon receiving your TVGo A03-IPTV, please make sure the following items are included in the
package.
•
TVGo A03-IPTV
• Driver CD
• Remote Control
• Quick Guide
• Video & Audio in connecter
1.2 System Requirements
• IBM PC or compatible
• Intel Pentium4 2.4G MHz CPU or better processor
• Minimum 128 MB memory (256MB is better)
• Minimum 100 MB hard disk space available
• One free USB2.0 slot
• Microsoft Windows 2000/XP/XP MCE/Vista
• CD-ROM drive
1.3 Usage of Remote Control
The key definition is different when under Windows XP and Windows XP
MCE/Windows Vista MCE. Follow the chart below for key definition.
Meanwhile, because Microsoft keeps changing MCE’s version, if your MCE
version is not version 5.1.2700.xxx or above, then our remote control can’t
control My TV item of Media Center.
English
2
Key Win 2000/XP/Vista XP MCE/Vista MCE
Open/Close TV Software Close MCE TV program
Record TV program Enter
Change screen size to
original window size or
return
Change screen size to
original window size or
return
Capture current screen
and save
Move curser back to
previous menu
0~9
Number 0 ~ 9 Number 0 ~ 9
Switch to the next
channel
Switch to the next
channel
Switch to the previous
channel
Switch to the previous
channel
Enlarge sound volume Enlarge sound volume
Reduce sound volume Reduce sound volume
Decade channel inputting
available
Move cursor upward
Click to start Time-shift
feature, click one more
time to play recorded
show.
Move cursor downward
Go back to the last
channel
Move cursor leftward
Switch input signal source
between TV, Composite,
and S-video
Move cursor rightward
English
3
Chapter 2: Getting Started
2.1 Connect the TVGo A03-IPTV
1. Connect the antenna cable to the
connector. (Use PAL to NTSC
adaptor if necessary)
2. Connect the device to PC USB
Hub.
2.2 Device Driver & Software Installation for
Windows 2000/XP
To install the TVGo A03-IPTV into your computer, follow the steps below:
Insert TVGo A03-IPTV CD into
CD-ROM, Setup menu will pop
up, click “Driver& Setup
Utility”
English
4
Click “Next” to continue
software installation.
Click “Next” button. (Click
“Browse” if choose different
destination to store TVGo
A03-IPTV folder)
Select the features to install
SKYPE Plus, deselect it if you
only install standard TV
application software.
English
5
Click “Install” button to begin
installation.
Click “Continue Anyway”
button
Click “Finish” to end setup
English
6
Once you connect TVGo
A03-IPTV to the USB port, you
can just follow the system’s
prompted messages to finish
the driver installation.
When you insert TVGo
A03-IPTV, system will show the
“Found New Hardware”
dialogue box.
Ignore the pop-up window and
go to next step.
Click the “Next” button to
continue the installation.
English
7
Click “Continue Anyway”
button
Click “Finish” button to end the
driver setting.
Make sure you can find the
driver in device manager.
English
8
2.3 Device Driver & Software Installation for Windows
XP Media Center Edition 2005
Notes:
(1) Install MCE Encoder so that you can also watch TV programs from “Media
Center”
To install the TVGo A03-IPTV into your computer, follow the steps below:
1.
Insert TVGo A03-IPTV CD
into CD-ROM, Setup
menu will pop up, click
“Driver & Setup Utility”
2. Click “Next” to continue
software installation.
English
9
3. Click “Next” button. (Click
“Browse” if you choose
different destination to
store TVGo A03-IPTV
folder)
4. Click “Install” button to
begin installation.
5. Click “Continue Anyway”
button
English
10
6. Click “Finish” to end setup
7.
Click “Next” to install
Remote Service Codec.
8.
Click “Next” to continue.
(Select different
destination by
clicking ”Browse” button).
English
11
9. Click “Next” button to
continue.
10. Click “Next” to continue.
(Select different
destination folder by
clicking “Change” button)
11. Click “Install” to start.
English
12
12.
Click “Finish” to continue.
13.
Click “Next” to install
MPEG-2 Decoder.
14.
Click “Next” to install
MPEG-2 Decoder
continually. (Select
different destination folder
by clicking “Browse”
button)
English
13
15.
Click “Next” button to
continue.
16.
Click “Finish” to continue.
17.
Click “Next” to continue.
English
14
18.
Select “Yes, I want to
restart my computer
now” and click “Finish” to
reboot computer.
19. Once you connect TVGo
A03-IPTV to the USB port,
you can just follow the
system’s prompted
messages to finish the
driver installation.
20. When you insert TVGo
A03-IPTV, system will
show the “Found New
Hardware” dialogue box.
21. Ignore the pop-up window
and go to next step.
English
15
22. Click the “Next” button to
continue the installation.
23. Click “Continue Anyway”
button
24. Click “Finish” button to
end the driver setting.
English
16
25. Make sure you can find
the driver in the device
manager.
English
17
2.5 Utility software installation for Windows XP Media
Center
1. For first open Media
Center Utility, please
click “Next” button to
continue the setup.
2. Click “Next” button to
continue.
3. Click “Next” button to
continue.
English
18
4. Select “No thank you”,
click “Next” button to
continue.
5. Select “No”, click “Next”
button to continue.
6. Select “Yes”, click
“Next” button to
continue.
English
19
7. Click “Next” button to
continue.
8. Click “Next” button to
continue.
9. Select “I am
finished”, click “Next”
button.
English
20
10. Click “Finish” button.
11. Select “My TV” by click
on it.
12. Click “Next” button to
set up TV signal
/