Scotsman Bin tops info chart Operating instructions

Brand: Scotsman

Model: Bin tops info chart

Type: Operating instructions

ScotsmanBinTops

11/11

 Type NumberofPlates Platesize(widthxdepth) Notes

KBT14A Fillerplate 2 7x24

KBT18C Structural 1 42x24 Holesforpriorflakers

KBT18D Structural 1 42x24 Holesforcurrentflakers

KBT20A Structural 1 30x24 Holesforpriorflakers

KBT22A Fillerplate 2 8.84x24

KBT24A Fillerplate 2 13.45x24

KBT25A Fillerplate 1 6.5x24

KBT27 Fillerplate 2 5.25x24

KBT28 Fillerplate 2 10.5x23.6

KBT29 Fillerplate 3 One@12.1x23.55;two

@6.10x23.6;



KBT31 Structural 1 22x24 StatusisPending

KBT32 Rotomold 1 30x24

KBT34 Fillerplate

and

rotomold

3 Two@8.97x23.1;one

@30x24



KBT37‐2X Structural 1 48x24

KBT38 Fillerplate 2 13.01x24

KBT39 Fillerplate 2 10.13x23.6

KBTABS Adapter 1plusfillcover 22 Corneliusitem

KBT40A Adapter 1plusfillcover 22 Corneliusitem

KBT41 Adapter 1plusfillcover 30 Corneliusitem

KBT42 Adapter 1plusfillcover 22 Corneliusitem

KBT43 Adapter 1plusfillcover 30 Corneliusitem

KBT44 Adapter 1plusfillcover 30 Corneliusitem

KBT45 Adapter 1plusfillcover 42 Corneliusitem

KBT46 Adapter 1plusfillcover 30 Corneliusitem



Structural:Fitsbetweenicemachineandbin,supportsicemachine.

FillerPlate:Fitsalongsideicemachineorothertop.

Rotomold:Moldedplastic,fitsbetweenicemachineandbin,supportsicemachine.

Adapter:Fitsbetweenicemachineanddispenser,supportsicemachinetovaryingdegrees.

Bin top height adders

Listed below are some bin tops and heights they add to the bin or dispenser.

Note: ID150 and ID200 and ID250 spec sheet heights include maximum height of the sloped

cover, which is removed when the bin top is used. The cover added about 1 5/8”, so using the bin

top can lower the height in some cases (see table below). Due to gaskets, total machine height

may be +- .25”. Also, some space must be allowed above the machine for the installation.

Kit Adds height Net Height on

ID150

Net Height on

ID200

Net Height on

ID250

KBT27 0

KBT23 1.5"

KBT22 0

KBT20A 1.5"

KBT15B 1.5"

KBT15 1.5"

KBT24 0

KBT14 0

KBT14A 0

KBT42 .25" 34.25

KBT43 2.00" 36 40

KBT44 .25" 34.25 38.25

Scotsman Bin tops info chart Operating instructions

Scotsman Bin tops info chart Operating instructions

Scotsman Bin tops info chart Operating instructions

Related papers

Other documents