Scotsman ID200 Datasheet

ID200
Scotsman
Brand
Scotsman
Model
ID200
Type
Datasheet

This manual is also suitable for

I D 1 5 0 / I D 2 0 0 / I D 2 5 0
S COTS M A N
This product qualies for the following listings:
YOU’LL VALUE OUR COUNTER TOP ICE DISPENSERS
C O U N T E R T O P I C E D I S P E N S E R S
Storage Capacity
MODEL Lbs./kg.
ID150 150/68
ID200 200/91
ID250 250/114
ID150
ID250
ID200
• Three sizes to t the needs of any application.
• Heavy duty agitator motor for long life.
• Heavy-duty agitator reduces ice jams and bridging.
• Adjustable o-cycle agitation for various ice forms and ambient conditions.
• R eliably dispenses nugget ice with condence.
• Insulated, heavy-duty drip tray prevents condensation.
• Gr eater dispensable ice for periods of peak demand.
• All components front accessible.
WARRANTY See your dealer for complete warranty details.
• 2 y ears parts on all components.
• 1 y ears labor on all components.
Ice/Dispenser Specications
IMPORTANT OPERATING REQUIREMENTS:
Minimum Maximum
Air Temperatures 50
0
F (10
0
C) 100
0
F (37.7
0
C)
Water Temperatures 40
0
F (4.4
0
C) 100
0
F (37.7
0
C)
Water Pressures 20 PSIG 80 PSIG
Electrical Voltage -5% +10%
INS TALLATION NOTE: Allow 6˝ minimum space at sides and back for ventilation and utility connections.
775 Corporate Woods Parkway • Vernon Hills, IL 60061 • 1-800-SCOTSMAN • Fax: (847) 913-9844
Visit our website at: www.scotsman-ice.com • E-mail: customer.ser[email protected]
Y O U ’ L L V A L U E T H E D I F F E R E N C E .
TM
35 5/8
89.0 cm
RIGHTFRONT
RIGHTFRONT
RIGHTFRONT
12 1/4
30.6 cm
7 3/4
19.3 cm
2 3/4
6.9 cm
2 3/4
6.9 cm
2 3/4
6.9 cm
10 1/16
25.1 cm
CUP
CLEARANCE
10 1/16
25.1 cm
CUP
CLEARANCE
10 1/16
25.1 cm
CUP
CLEARANCE
21 1/4
53.1 cm
29
72.5 cm
30 11/16
76.7 cm
7 3/4
19.3 cm
21 1/4
53.1 cm
29
72.5 cm
30 11/16
76.7 cm
7 3/4
19.3 cm
21 1/4
53.1 cm
29
72.5 cm
30 11/16
76.7 cm
30 1/4
75.6 cm
30
75.0 cm
30 1/4
75.6 cm
30
75.0 cm
30 7/16
76.0 cm
30 7/16
76.0 cm
ID200
ID250
35 5/8
89.0 cm
12 1/4
30.6 cm
22 1/4
55.6 cm
22
55.0 cm
39 5/8
99.0 cm
16 1/4
40.6 cm
30 7/16
76.0 cm
2 7/8
7.2 cm
2 7/8
7.2 cm
2 7/8
7.2 cm
ID150
TO FRONT TOP OF DRIP TRAY
22
55.0 cm
7/16
.43 cm (4) PLCS
18 5/8
46.5 cm
15
37.5 cm
3 1/2
8.7 cm
8 5/8
21.5 cm
18 7/16
46.0 cm
6 11/16
16.7 cm
TO FRONT OF
DRIP TRAY ON
COUNTER TOP
30
75.0 cm
7/16 (4) PLCS
.43 cm
18 5/8
46.5 cm
23
76.7 cm
3 1/2
8.7 cm
11 5/8
29.0 cm
26 7/16
66.1cm
9 3/16
22.9 cm
30 11/16
76.7 cm
REMOVABLE
SINK
TO FRONT OF
DRIP TRAY ON
COUNTER TOP
TO FRONT TOP OF DRIP TRAY
29
65.0 cm
21 1/4
53.1 cm
12
30.0 cm
9
22.5 cm
OPENING
12
30.0 cm
9
22.5 cm
OPENING
MOUNTING
TEMPLATE
30
75.0 cm
7/16 (4) PLCS
.43 cm
1 13/16
4.5 cm
1 5/16
3.3 cm
18 5/8
46.5 cm
23
57.7 cm
3 1/2
8.7 cm
11 5/8
29.0 cm
26 7/16
66.1cm
9 3/16
22.9 cm
30 11/16
76.7 cm
REMOVABLE
SINK
TO FRONT OF
DRIP TRAY ON
COUNTER TOP
TO FRONT TOP OF DRIP TRAY
29
65.0 cm
21 1/4
53.1 cm
12
30.0 cm
9
22.5 cm
OPENING
MOUNTING
TEMPLATE
MOUNTING
TEMPLATE
30 11/16
76.7 cm
29
65.0 cm
21 1/4
53.1 cm
RECOMMENDED COUNTER OPENING SIZE 9" X 12" FOR UTILITIES AND TUBING.
OPENING CAN BE LOCATED ANYWHERE WITHIN THE SHADED AREA.
RECOMMENDED COUNTER OPENING SIZE 9" X 12" FOR UTILITIES AND TUBING.
OPENING CAN BE LOCATED ANYWHERE WITHIN THE SHADED AREA.
RECOMMENDED COUNTER OPENING SIZE 9" X 12" FOR UTILITIES AND TUBING.
OPENING CAN BE LOCATED ANYWHERE WITHIN THE SHADED AREA.
1 13/16
4.5 cm
1 5/16
3.3 cm
1 13/16
4.5 cm
1 5/16
3.3 cm
Consult Your Local SCOTSMAN Representative At:
Machine requires voltage indicated on rating name plate. Failures caused by improper voltage are not considered
factory defects. Extended periods of operation at temperatures exceeding limitations constitutes misuse under the
terms of Scotsman Manufacturer’s Limited Warranty, resulting in a loss of warranty coverage. Specications and
design are subject to change without notice.
Scotsman’s ice machines are not designed for outdoor installations.
SD-ID 3M 8-05
S gnippihS.niMeziS esuF xaMcisaBegarot
thgieWtiucriCtiucriCtiucriC RCAH rolacirtcelEyticapaCsnoisnemiDledoM
Number W” x D” x H” lbs./kg. Actuation Volts/Hz/Phase Breaker Wires Ampacity lbs./kg.
ID150B-1B 22 x 30 x 35 5/8 150/68 Push Bar 115/60/1 15 2 Cord 150/68
ID200B-1B 30 x 30 x 35 5/8 200/91 Push Bar 115/60/1 15 2 Cord 250/113
ID250B-1B 30 x 30 x 39 5/8 250/114 Push Bar 115/60/1 15 2 Cord 300/136
OPTIONS:
IOBDMS22 Machine Stand for ID150 & BD150 W” X D” X H”–22 x 30 x 30
IOBDMS30 Machine Stand for ID200&250 and BD200&250 W” X D” X H”–30 x 30 x 30
KNUGDIV Field Installed Nugget Diverter Kit for All ID & BD Dispensers
KWGFID ID Field Installed Water Glass Filler Kit
KME R150GI ID150 Replacement Merchandiser – Generic
KME R200GI ID200 Replacement Merchandiser – Generic
KME R250GI ID250 Replacement Merchandiser – Generic
KBT40 ABS, ID150 & BD150 Bintop for Eclipse Cubers
KBT41 ID200, ID250, BD200 & BD250 Bintop for Eclipse Cubers
KBT42 ID150, BD150 Bintop for 22" Cuber or 21 Nugget Maker
KBT43 ID200, ID250, BD200, BD250 Bintop for 22" Cuber
KBT44 ID200, ID250, BD200, BD250 Bintop for 30" Cuber
KBT46 ID200, ID250, BD200, BD250 Bintop for 21" Nugget Maker
  • Page 1 1
  • Page 2 2

Scotsman ID200 Datasheet

ID200
Scotsman
Brand
Scotsman
Model
ID200
Type
Datasheet
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents