Scotsman Bin tops info chart Operating instructions

ScotsmanBinTops

11/11

 Type NumberofPlates Platesize(widthxdepth) Notes

KBT14A Fillerplate 2 7x24

KBT18C Structural 1 42x24 Holesforpriorflakers

KBT18D Structural 1 42x24 Holesforcurrentflakers

KBT20A Structural 1 30x24 Holesforpriorflakers

KBT22A Fillerplate 2 8.84x24

KBT24A Fillerplate 2 13.45x24

KBT25A Fillerplate 1 6.5x24

KBT27 Fillerplate 2 5.25x24

KBT28 Fillerplate 2 10.5x23.6

KBT29 Fillerplate 3 One@12.1x23.55;two

@6.10x23.6;



KBT31 Structural 1 22x24 StatusisPending

KBT32 Rotomold 1 30x24

KBT34 Fillerplate

and

rotomold

3 Two@8.97x23.1;one

@30x24



KBT37‐2X Structural 1 48x24

KBT38 Fillerplate 2 13.01x24

KBT39 Fillerplate 2 10.13x23.6

KBTABS Adapter 1plusfillcover 22 Corneliusitem

KBT40A Adapter 1plusfillcover 22 Corneliusitem

KBT41 Adapter 1plusfillcover 30 Corneliusitem

KBT42 Adapter 1plusfillcover 22 Corneliusitem

KBT43 Adapter 1plusfillcover 30 Corneliusitem

KBT44 Adapter 1plusfillcover 30 Corneliusitem

KBT45 Adapter 1plusfillcover 42 Corneliusitem

KBT46 Adapter 1plusfillcover 30 Corneliusitem



Structural:Fitsbetweenicemachineandbin,supportsicemachine.

FillerPlate:Fitsalongsideicemachineorothertop.

Rotomold:Moldedplastic,fitsbetweenicemachineandbin,supportsicemachine.

Adapter:Fitsbetweenicemachineanddispenser,supportsicemachinetovaryingdegrees.

Bin top height adders

Listed below are some bin tops and heights they add to the bin or dispenser.

Note: ID150 and ID200 and ID250 spec sheet heights include maximum height of the sloped

cover, which is removed when the bin top is used. The cover added about 1 5/8”, so using the bin

top can lower the height in some cases (see table below). Due to gaskets, total machine height

may be +- .25”. Also, some space must be allowed above the machine for the installation.

Kit Adds height Net Height on

ID150

Net Height on

ID200

Net Height on

ID250

KBT27 0

KBT23 1.5"

KBT22 0

KBT20A 1.5"

KBT15B 1.5"

KBT15 1.5"

KBT24 0

KBT14 0

KBT14A 0

KBT42 .25" 34.25

KBT43 2.00" 36 40

KBT44 .25" 34.25 38.25

Scotsman Bin tops info chart Operating instructions

Related papers

Other documents