Customer Service Informaon
Telephone: (800) 323-5565
Fax: (310) 533-3899
Hours: 8:30 AM – 4:30 PM (PST)
Email: Suppor[email protected]
Homepage: www.SevilleClassics.com
FAQS
Q. Can I use it outside?
A. Our cart is designed for temporary outdoor use. Storing the cart outdoors
increases the risk of corrosion from moisture.
Q. Can I use it with fewer shelves? Without the handle?
A. Yes! You can use the cart with a minimum of two shelves and without the handle.
072019
Specicaons
Dimensions: 34" W x 18" D x 33.5" H
Weight capacity: 500 lbs. evenly distributed
Weight: 42 lbs.
Addional parts and accessories are available for purchase online at:
www.SevilleClassics.com
SHE24023
1" Slip Sleeves
(8-Pair)
Commercial-Grade 3-Tier
NSF Ulity Cart
Model: SHE18304BZ
Thank you for choosing Seville Classics! We hope that you enjoy your ulity
storage cart. Please read through this user guide for parts list, assembly
instrucons, frequently asked quesons and further contact informaon.
072019
Parts List
Assembly Instrucons
A. Handle (1)
Please make sure you have all the parts on this list.
If you’re missing parts, contact us for replacements at
1
B. Shelf (3)
C. Poles (4)
D. Slip sleeves (14)
E. Locking wheels (2)
F. Locking wheels (2)
STEP 1.
Press stem of WHEELS (E, F) into
boom of POLES (C).
Wheel should "click" when installed.
Repeat for all POLES (C).
2
STEP 2.
Snap SLIP SLEEVES (D) to the
lowest groove on POLES (C).
STEP 3.
Fit SHELF (B) over the top of
the 4 poles and over
SLIP SLEEVES (D).
TIP: If needed, use a rubber
mallet to fasten the shelf.
Repeat STEPS 2-3 at chosen
height for 2nd shelf.
STEP 4.
Snap 2 SLIP SLEEVES (D) to
poles on the narrow side of
the cart.
Slide HANDLE (A) over
SLIP SLEEVES (D).
TIP: Leave space at top of
POLES (D) for nal shelf.
STEP 5.
Repeat STEPS 2-3 for
nal shelf.
TIP: If necessary, use a
rubber mallet to fasten
the shelf.
/
