Hessaire 6020081 Installation guide

HESSAIRE DRAIN PLUG REPLACEMENT

WARNING

_____________________________________________________________________________________________

● DISCONNECT ELECTRICAL POWER TO COOLER BEFORE REPLACING THE DRAIN PLUG.

● DRAIN PLUG INSTALLATION MUST COMPLY WITH COOLER MANUFACTURER’S SPECIFICATIONS AND APPLICABLE

ELECTRICAL AND BUILDING CODES

● USE ONLY IN UPRIGHT POSITION.

1) Pull or unscrew drain plug/cap from drain

assembly

2) Tip unit to ensure all water exits the unit

3) Replace the drain plug ensuring it is tightly

inserted in place

4) If the finger tab breaks off you will need to

open the back panel to access the plug from

inside the unit and force it out with a screw

driver

5) Secure

the screw tab with a

stainless screw

Screw Tab

↓

↑

Finger

Tab

This manual is also suitable for