Extron TLP Pro 720M Template

Cut-Out Template for the Extron

TLP Pro 720M

1. Confirm the product to be installed.

2. Before printing, double-check the

print settings and make sure the page

is not scaled.

3. Remove the surface cut-out area (gray)

from the template.

4. Measure the cutout and template.

5. Mark the position on the mounting surface

where the TLP Pro 720M is being installed.

6. Double check dimensions and position,

then cut the opening.

P/N 68-2162-02 Rev. A

Outer Edge of Front Bezel

(Do not cut this line.)

Mounting Holes (4)

SURFACE

CUT-OUT

AREA

5.813"

(14.76 cm)

7.5"

(19.05 cm)

7.914"

(20.10 cm)

0.207" 4 plcs.

(0.53 cm)

4.094"

(10.40 cm)

0.860" 4 plcs.

(2.18 cm)

Page size: 11" x 17"

Print scale 1:1

Do not shrink.