Page is loading ...
MANUAL
LANTIME M300/GPS
NTP Server
Table of Contents
1 Impressum 1
2 Quick Start 2
3 Network Timeserver with GPS synchronized time base 3
4 The Modular System LANTIME 4
5 Network Time Protocol (NTP) 7
6 GPS satellite controlled clock 9
7 Mounting the GPS Antenna 11
8 Booting the GPS170 receiver 14
9 Booting the Single Board Computer 15
10 Configuration User Interface 16
1 Impressum
2 Quick Start
Starting up please wait...
.......
GPS: NORMAL OPERATION Mon, 28.08.2011
NTP: Offs. PPS: -50us UTC 14:33:10
↓, ok, ↓, ok, →, ok
SATELLITE CONSTELLATION
In view: 8 Good: 7 Sel: 05 22 17 09
Global Cfg. Services
Interfaces-> <-
SETUP: Ipv4 LAN Parameter ETH0
Ipv4 ADDRESS: 192.168.10.200
3 Network Timeserver with GPS synchronized
time base
4 The Modular System LANTIME
OK
ESC
Time Service
Ref. Time
Network
Alarm
Terminal
USB
5
9
1
6
GPS: NORMAL OPERATION
NTP: Offset PPS: -4µs
UTC 12: 00 : 00
Mon , dd.mm.yyyy
F1
F2
LANTIME M300
LANTIME M300
ENGLISH
1. LC Display
2. Function buttons: 4-way navigation
Button; F1, F2, OK, ESC
3. Status LEDs: Ref. Time, Time Service,
Network, Alarm
4. Terminal port, RS232 Time String output
5. USB connector
6. 19” Mounting Rack
DEUTSCH
1. LC - Display
2. Funktionstasten: 4 - Richtungen;
F1, F2, OK, ESC
3. Status LEDs: Ref. Time, Time Service,
Network, Alarm
4. Terminal port, RS232 Zeitstring Ausgang
5. USB Anschluss
6. Haltewinkel für 19” Rackmontage
1 2 3 4 5 6
COM1
COM 0
Error
GPS
Antenna
CO NO NC
1
6
5
9
1
6
5
9
100M 10M 100M 10M
ETH0
ETH2
ETH1
ETH3
PPS Out
10MHz Out
8 7 6 5 4 3 2 1
DEUTSCH
RS232 Ausgang: serielle Schnittstellen, Zeittelegramme
3. Error: Störmelderelais Ausgang
4. GPS Antenne
5. Sekunden Impuls Ausgang, 10MHz Ausgang (TTL)
6. für weitere BNC Ausgänge
7. LNE Optional
8. Netzwerk Anschlüsse ETH0, ETH1, 10/100 Mbit Rj45
1. Stromversorgungseingang
2.
ENGLISH
RS232 Output: serial interface, time telegram
3. Error relay output
4. GPS antenna
5. Pulse Per Second (PPS) , 10MHz (TTL) output
6. for additional outputs (e.g. IRIG time code)
7. Option: LNE - additional network interfaces
8. Network interfaces ETH0, ETH1, 10/100 Mbit Rj45
1. Power Supply (AC/DC)
2.
output
4.1 Supported Network Services
4.2 Additional Features
•
•
•
•
•
•
4.3 User Interface
•
•
•
•
•
•
•
•
4.4 Input and Output Options
•
•
•
•
•
4.5 Why to use a Network Time Server?
•
•
•
•
•
5 Network Time Protocol (NTP)
5.1 NTP Target
5.2 NTP-Client Installation
6 GPS satellite controlled clock
6.1 GPS Clock Features
6.2 Time Zone and Daylight Saving
7 Mounting the GPS Antenna
◦
◦ ◦
7.1 Example:
7.2 Antenna Assembly with Surge Voltage Protection
7.3 Antenna Short-Circuit
ANTENNA
SHORT-CIRCUIT
DISCONNECT POWER
! ! !
8 Booting the GPS170 receiver
/
