Assembly Instructions: 7312-FM (Bartlett)
IMPORTANT:
• ALL INSTALLATION WORK SHOULD BE DONE BY ACCREDITED PROFESSIONAL.
• SHUT OFF POWER SUPPLY AT FUSE OR CIRCUIT BREAKER!
• USE ONLY THE SPECIFIED BULBS. DO NOT EXCEED THE MAXIMUM WATTAGE!
PREPARING FOR INSTALLATION
Remove all of the contents from the carton. See the important
notes above. Shut off the power at the circuit breaker and
completelyremovetheoldxturefromtheceiling,includingthe
oldmountingstrap.
Fromthepartsbagremovethemountingstrapassembly.One
endofnipple(C)shouldbeattachedtomountingstrap(A)
withwasherandhexnut(DandE)inplace.Attachmounting
strap(A)tothejunctionboxusingmountingscrews(B)anda
screwdriver.Tightensecurely.
CONNECTING THE WIRES
Haveanassistantsupportthexture’sweightwhilecompleting
thewiring.Cutawayexcesswire.
Attachthexture’swiresto
thepowersupplywiresfromthejunctionbox.Connectblack
to smooth/black/transparent (L) wire; white to ribbed/white/
transparent(N)wire;groundtoground(greenorcopper).Twist
theendsofthewirepairstogether,andthentwistonawire
connector. Make sure all twists are in the same direction. If
thereisnogroundwire(greenorcopper)fromthejunctionbox,
locategroundscrew(F)onthemountingbracket/mounting
strapandwrapthexture’sgroundwirearoundthegreen
groundscrew(F).Useascrewdrivertosecuregroundscrew(F)
ontothemountingbracket/mountingstrap.Tuckallwiresneatly
intothejunctionbox.
FINISHING THE INSTALLATION
Avoidtouchingtheinsulationwithyourbarehands.Raisethe
topofxture(G)totheceiling.Positionnipple(F)sothatit
protrudesthroughthecenterofxture(G).Securexture(G)to
mountingstrap(A)bythreadingdecorativenuts(H)ontonipple
(C).Tightensecurely.
Installlightbulbs(notprovided)inaccordancewiththexture’s
specications.Donotexceedthemaximumwattage.
Placecagediffuser(P)upbeneaththeshadeofxture(G)and
secure in place with screws (O).
Your installation is now complete. Turn on the power and test
thexture.
CLEANING TIPS
Treat the xture gently! Regular cleaning will reduce the need for deep cleaning. For regular cleaning, turn off the light and wipe down the
xture with a clean lint-free cotton or microber cloth. Never spray cleaner directly onto the xture.
For Customer Service, contact the
place of purchase.
Smooth / Black /
Transparent (L)
Ribbed / White /
Transparent (N)
Bare Copper / Transparent with
Green Interior / Green
White (Neutral)
Green
(Ground)
7.00
10.00
7.00
10.00
BOX
JUNCTION
C
D
A
G
F
B
P
O
E
H