CURT 58001 Installation guide

CURT
Brand
CURT
Model
58001
Category
Wall & ceiling mounts accessories
Type
Installation guide

CURT 58001 is an electrical bracket designed to be attached to the receiver tube collar of a vehicle. It provides a mounting point for a 4- or 5-way plug, which is used to connect the vehicle's electrical system to a trailer or other towed item. The bracket is made of durable materials and is easy to install. It can be used with a variety of vehicles and trailers, making it a versatile addition to any towing setup. Here are some of the key features and benefits of the CURT 58001 electrical bracket:

  • Easy to install: The bracket can be installed in minutes using the included hardware.
  • Durable construction: The bracket is made of sturdy materials that can withstand the elements and the rigors of towing.

CURT 58001 is an electrical bracket designed to be attached to the receiver tube collar of a vehicle. It provides a mounting point for a 4- or 5-way plug, which is used to connect the vehicle's electrical system to a trailer or other towed item. The bracket is made of durable materials and is easy to install. It can be used with a variety of vehicles and trailers, making it a versatile addition to any towing setup. Here are some of the key features and benefits of the CURT 58001 electrical bracket:

  • Easy to install: The bracket can be installed in minutes using the included hardware.
  • Durable construction: The bracket is made of sturdy materials that can withstand the elements and the rigors of towing.
CURTMFG.COM
•
NEED ASSISTANCE?
•
87 7. 2 8 7. 8 6 3 4
•
58001-INS-RB
•
PAGE 1
INSTALLATION MANUAL
58001
Level of Difficulty
Easy
Notes and Maintenance
Before you begin installation, read all instructions thoroughly.
Proper tools will improve the quality of installation and reduce the time required.
Mild automotive detergent may be used to clean the product. Do not use dish detergent, abrasive
cleaners, abrasive pads, wire brushes or other similar products that may damage the finish.
Product Photo
Product Registration
CURT Group stands behind our products with industry leading warranties.
You can help us continue to improve our product line and help us understand
your needs by registering your purchase by visiting:
warranty.curtgroup.com/surveys
At CURT Group, customer is king. We value your feedback and we use that information to make
improvements on our products. Please, take a minute and let us know how we are doing.
Parts List
Qty Description #
4 Nylock nut, M5 - 0.8 1
2 Carriage bolt, M5 - 0.8 x 20mm 2
2 Carriage bolt, M5 - 0.8 x 90mm 3
1 Mounting bracket 4
2 Spacer 5
Tools Required
Wrench set Socket set
CURTMFG.COM
•
NEED ASSISTANCE?
•
87 7. 2 8 7. 8 6 3 4
•
58001-INS-RB
•
PAGE 2
Step 1
Note: Prior to installing the electrical
bracket, check for adequate clearance for
the bracket, plug(s) and wiring. Forming the
lower bracket flange prior to installation can
help create a tighter fit during installation.
Do this by pushing the lower flange against
the ground until it creates a snug fit around
the receiver tube. See Detail A.
Attach the 4- or 5-way plug using the
provided hardware, as shown. Tighten the
hardware evenly until snug. Overtightening
the hardware can cause the front of the
bracket to bow or the hardware to break.
Step 2
Slide the electrical bracket
over the receiver tube collar.
Note: Use the supplied spacers (#5) as
needed if there is a larger gap between
the collar and the electrical bracket.
Step 3
Secure the electrical bracket
to the receiver tube collar using
the provided hardware, as shown.
Parts List
Qty Description #
4 Nylock nut, M5 - 0.8 1
2 Carriage bolt, M5 - 0.8 x 20mm 2
2 Carriage bolt, M5 - 0.8 x 90mm 3
1 Mounting bracket 4
2 Spacer --
ASSEMBLY
4
1
Detail A
Receiver tube
2
Hitch
Note: if there is not adequate space
to insert bolt from above you may
need to insert bolt from below.
3
Formed flange
  • Page 1 1
  • Page 2 2

CURT 58001 Installation guide

CURT
Brand
CURT
Model
58001
Category
Wall & ceiling mounts accessories
Type
Installation guide

CURT 58001 is an electrical bracket designed to be attached to the receiver tube collar of a vehicle. It provides a mounting point for a 4- or 5-way plug, which is used to connect the vehicle's electrical system to a trailer or other towed item. The bracket is made of durable materials and is easy to install. It can be used with a variety of vehicles and trailers, making it a versatile addition to any towing setup. Here are some of the key features and benefits of the CURT 58001 electrical bracket:

  • Easy to install: The bracket can be installed in minutes using the included hardware.
  • Durable construction: The bracket is made of sturdy materials that can withstand the elements and the rigors of towing.
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents