GoDuo Wireless Speakers

User Manual

Quick Reference

to Frequent Operations

Specifications

Model: GoDuo-RED

Speaker output power: 5W ×2

Work range: Up to 50 feet (15 meters)

Dimensions (each speaker): 3.6”×2.4” ×2.4”

Dimensions (whole product): 9.1” ×2.6” ×2.6”

Weight (speaker): 210 grams per speaker

Weight (carrying case): 106 grams

Music time: Up to 18 hours (at medium volume)

Talk time: 18 hours

Charging time: 2 ~ 3 hours

Battery type: 3.7V rechargeable Lithium polymer battery

Power Off: Press and hold MFB for 3 seconds until red LED flashes with a voice prompt "power off"

LED status: When speaker is being charged, the LED indicator is in solid green color. The LED turns off when speaker is fully charged. If

when charging cable is plugged in, the LED turns green for a few seconds and then turns off, or does not turn green at all, it means the

speaker is already fully charged and does not need to be charged any longer.

GoDuo SoundFlux Dock'nRoll Press Support

Language Switch & Mute Voice Instructions



When the two speakers are powered on and paired, before connecting to any Bluetooth devices (handset or computer), triple-press MFB

on each speaker to switch voice prompt languages, or put voice instructions on silence. You will hear “English selected” or “Español

seleccionado” or "Voice Instruction Muted" as notification of successful switch. If your speakers are already paired with any Bluetooth

When the speakers are off, press and hold MFB on each speaker for 3 seconds to power them on. Both LED lights flash in blue and red

alternatively. Then double-press MFB on one (either one) speaker. You will hear the voice “pairing” and LED on this speaker flashes in

purple. Within a few seconds you will hear two prompts “Left channel connected” and “Right channel connected”, which means the two

speakers are successfully paired. The speaker which you double-press on is the left channel, and the other speaker is the right channel.

Once the two speakers are successfully paired for the first time, for the next time, the two speakers will connect to each other

automatically.

Pairing the speakers with phone/computer

When the two speakers are successfully paired without connecting to any device, the LED light of the left channel speaker flashes in blue

and red alternatively, search on your Bluetooth device (phone, tablet or computer) and find “KNZ GoDuo” to connect. You will hear a

prompt “Bluetooth connected”, which means the speakers are successfully connected with your Bluetooth device.

Battery Status



When the speakers are connected with some handsets, such as iPhone, Bluetooth battery level is showed on the status bar.

When speaker battery is low, LED becomes red instead of blue. You will hear a voice prompt “battery low” every 30 seconds.

Handsfree Call



When the speakers are used in a pair, handsfree phone call is only supported with the left channel speaker, not both sides.

Answer: press MFB on the left channel speaker to answer an incoming call.

End: during a phone call, press MFB on the left channel speaker.

Reject: press and hold MFB for 3 seconds on the left channel speaker to reject an incoming call.



When the two speakers are connected, connect your device with the left channel speaker via AUX cable, both speakers will work

simultaneously in AUX mode. If AUX cable is connected to the right cannel speaker, then only the right channel speaker will work in AUX

mode.

AUX input has higher priority than Bluetooth. If the speakers are connected with music device via both AUX cable and Bluetooth

connection, they will play in AUX mode by default.

Siri Support



When the speakers are connected to iPhone in a pair or individually, double-press MFB on the left channel speaker or the individual

speaker to activate Siri.

FCC Statement



This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment

generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the

receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit

equipment.

GoDuo SoundFlux Dock'nRoll Press Support