Turtle Beach Earforce Phantom - Call of Duty Ghosts User manual

Brand: Turtle Beach

Model: Earforce Phantom - Call of Duty Ghosts

Category: Headsets

Type: User manual

This manual is also suitable for

User GUide

Limited edition WireLess doLby

sUrroUnd soUnd GaminG Headset

WireLess

For: Xbox 360

I PS3

™

I Mobile

DOWNLOAD GAME OPTIMIZED PRESETS

Customize your own presets using tools available on our website.

HTTP://WWW.TURTLEBEACH.COM/PRESETS

Congratulations on your purchase of the Call of Duty

Ghosts Ear Force

Phantom from Turtle Beach. You

now have in your possession a premium product that will bring your gaming experience to a whole new level,

heightening your senses, sharpening your reﬂexes and enhancing your communications. Welcome to excellence!

Table of Contents

Package Contents 4

Feature/Function Map (Location of controls/inputs) 5

Setting Up (Connections etc.) 7

Xbox 360 E + HD Audio Converter 8

Pairing Instructions 9

Xbox 360 Chat Setup 10

Xbox 360 System Settings Conﬁguration 11

Playstation 3 Chat Setup 12

Playstation 3 System Settings Conﬁguration 13

Surround Sound Settings 14

Bluetooth

Settings 15

Phone Settings 16

Recharging 17

Presets and Modes 18

Presets/Speciﬁcations 20

Mobile Device Cable 21

Regulatory Compliance 22

Declaration of Conformity 24

European Community Declaration of Conformity 25

Warranty 26

Package Contents

Ear Force

Phantom

Headset with

Detachable Microphone

Headset Charging Cable

RF Transmitter

Digital Optical Cable

Xbox Bluetooth Adapter

(XBA)

USB Transmitter

Power Cable

Mobile Device Cable

USB Data Cable

Quick Start GuidePresets Reference Turtle Beach Sticker

Feature/Function Map (Location of controls/inputs)

Headset

1. Mode

2. Power/Pair

3. Game Presets

4. Chat/Mic. Presets

5. Programmable Control

(Mic. Monitor by default)

6. Xbox 360 Talkback Cable/

Mobile Device Cable Jack

7. Game Volume Control

8. Bluetooth Volume Control +

9. Bluetooth Volume Control -

10. Bluetooth LED

11. Bluetooth Multi Function

Button(MFB)/Pair

12. Mic. Mute

13. Charge Status LED

14. USB Port

1 5 6 72 3 4

Left Earcup

BT VOL+

BT VOL-

8 9 11 12 13 14

Right Earcup

Feature/Function Map (Location of controls/inputs)

RF Transmitter

1. Power/Pairing LED and Button

2. Digital Input LED

3. Dolby Digital LED

4. SURROUND ON/OFF Button

5. SURROUND ANGLES Button

6. DIGITAL IN/OUT

7. LINE IN (Left/Right)

8. LINE IN VOLUME Control

9. DC 5V Input

DIGITAL

OUT

LINE IN

VOLUME

DC 5V

Heading

Optical Cable

USB Transmitter Power Cable

CONSOLE

DIGITAL OUT

CONSOLE

USB

DIGITAL

OUT

LINE IN

VOLUME

DC 5V

* Original Xbox360 Models may require the Xbox360

Audio Adapter(Sold Separately).

RF Transmitter and Mic Boom Setup (PS3/Xbox 360)

1. Connect the optical cable from the DIGITAL OUT on

the console to the DIGITAL IN on the transmitter.

2. Connect the transmitter power cable from a USB

Port on your console to the DC 5V on the transmitter.

3. Insert Microphone Boom so the small triangle

on the boom faces toward the headset.

4. Power headset ON.

- Press and hold Power button until LED turns solid.

- Listen for voice prompt, “Powering on”.

Setting Up (Connections etc.)

Heading

Xbox 360 E

Console

HDMI Cable

to HDMI OUT portto OPTICAL

OUT

to DIGITAL

to HDMI IN port

FRONT

Wall Plug

Wall Outlet

BACK

*Ear Force HD Audio Converter

*Ear Force HD Audio Converter is available for purchase at Turtlebeach.com/HDAC

DIGITAL

OUT

LINE IN

VOLUME

DC 5V

Xbox 360 E + HD Audio Converter

Follow the diagram below to set up your Turtle Beach Phantom Headset with the Xbox 360 E.

Note: This setup should not be used on other versions of the Xbox 360 Console.

Pairing Instructions

Headset and Transmitter

The headset and transmitter are pre-paired out of the box. The instructions below are only necessary if pre-pairing

appears to have been lost.*

1. Headset should be powered OFF.

2. Press and hold Power/Pairing button on the transmitter for 5 seconds until the Power/Pairing LED ﬂashes rapidly.

Release.

3. Press and hold Power button on the headset until the Power LED ﬂashes rapidly. (The headset will announce “Pairing

headset.”) Release.

4. Once your Turtle Beach Phantom headset has been paired successfully, the headset Power LED will blink once per

second and the transmitter’s Power/Pairing LED will light solid. A voice prompt will announce, “Headset paired.”

dual band wireless

WiFi

GHz

* If pairing is unsuccessful on ﬁrst attempt, please try again. It may take as many as ﬁve attempts to pair successfully.

Xbox 360 Chat Setup

Xbox360 Wireless Chat Settings

Your Turtle Beach Ear Force

Phantom headset is designed to work with Xbox 360 game consoles. For best performance,

use with ofﬁcial Microsoft® Xbox 360 controllers. In order to get ideal functionality from your headset, follow the directions

below.

1. Turn on Xbox 360 Controller and plug the XBA into the controller’s headset jack.

2. Power on your headset.

3. Make sure that your headset’s Bluetooth is powered OFF: If the Bluetooth LED is blinking at all, hold the Bluetooth

button (or “BT MFB”) for 4 seconds to power off the Bluetooth. (The Bluetooth LED will not be lit when the Bluetooth

is powered off.)

4. With the XBA powered OFF (XBA LED off), press and hold the button on the XBA for 4 seconds and let go when the XBA

begins to blink rapidly. (Your XBA is now in pairing mode.)

5. Press and hold the Bluetooth button (BT MFB) on your headset until the LED blinks blue and red. (Your headset is now

in pairing mode, and a voice prompt in the headset will announce, “Pairing Bluetooth.”)

After a few seconds, the XBA and the headset will be paired, and a voice prompt will announce “Bluetooth paired.”

The headset’s Bluetooth LED will blink blue once per second, and the XBA will blink once per second, indicating

that they’re paired.

XBA LED

XBA Button

XBA Functions I Fonctions XBA

Function Button Press LED

Power ON Single 1 blink/sec

Power OFF Hold 4 secs OFF

Mic MUTE Double Solid ON

Mic UNMUTE Double 1 blink/sec

Pairing Mode

(paired)

(not paired)

Hold 4 secs Rapid blink

1 blink/sec

2 blinks/sec

Xbox 360 System Settings Conﬁguration

Xbox 360 Conﬁguration

1. Go to Xbox 360 Settings

- Choose “System Settings”

- Choose “Console Settings”

- Choose “Audio”

- Set “Digital Output” to “Dolby Digital 5.1”

2. Go back to Xbox 360 Settings

- Choose “Preferences”

- Choose “Voice”

- Set both Voice Volume and Game Volume to “10”

- Set Voice Output to “Play Through Headset”

Select Back

Digital Output

Current Setting

Dolby Digital

Choose the digital output

type for your system.

This setting only applies

to optical digital and HDMI

audio outputs.

Digital Stereo

Dolby Digital 5.1

Voice Volume 10

Voice

Mute Kinect

Voice Output

Play Through Headset

Play Through Speakers

Play Through Both

Game Volume 10

Dolby Digital 5.1 with WMA Pro

PS3 Chat Setup

PS3 Bluetooth Conﬁguration

1. With the Phantom Bluetooth powered OFF, go to

the PS3 Menu and select “Settings” > “Accessory

Settings” > “Manage Bluetooth Devices”

2. If you have never used a Bluetooth device or have

deleted any proﬁles from other devices previously used

with your console, the PS3 prompt will ask if you wish

to register a device. Choose “Yes” to start scanning.

If any other Bluetooth devices have previously been

paired with your console they will appear in alist.

Choose “Start Scanning” at the bottom of the screen.

3. On the Phantom headset, press and hold the BT MFB

for 5 seconds until the Bluetooth LED starts ﬂashing

blue and red.

4. When the PS3 is ﬁnished scanning, it will prompt you

to select the Bluetooth device. Select “Turtle Beach

Phantom” from the list.

5. Enter “0000” as the Pass Key and select “OK”. The

Bluetooth LED on the headset will ﬂash blue about

once per second, indicating that the Bluetooth has

paired to your PS3.

Your Turtle Beach Ear Force

Phantom headset is designed to work with PS3 game consoles. In order to get ideal

functionality from your headset, follow the directions below.

12/14 12:15 PM

headsets, keyboards and mouse devices.

PS3 Chat Settings

1. Go to PS3 Settings

- Choose “Accessory Settings”

- Set “Input Device” to “Turtle Beach Phantom”

- Set “Output Device” to “Turtle Beach Phantom”

Note: You will not be able to set the Phantom as

your input or Output Device until you follow the

steps under “PS3 Bluetooth Conﬁguration”.

2. Set Microphone Level to 3 or 4

Audio Device Settings

Microphone Level 3

Input Device TURTLE BEACH PHANTOM

Output Device TURTLE BEACH PHANTOM

Back

X Enter

PS3 System Settings Conﬁguration

PS3 Audio Output Settings

1. Go to Settings

- Choose “Sound Settings”

- Choose “Audio Output Settings”

- Choose “Optical Digital”

- Choose “Dolby Digital 5.1 Ch.”

- Make sure “DTS 5.1 Ch.” is NOT checked.

2. Go to Settings

- Choose “Sound Settings”

- Choose “Audio Multi-Output” and set to “On”

Audio Output Settings

Select the connector on the TV or AV amplifier (receiver).

Turn on the power of the connected device.

Cancel

Audio Output Settings

12/14 12:15 PM

Sets to output audio through multiple connectors

simultaneously. Audio output to connectors that are

not selected in [Audio Output Settings] is downscaled

to 2 Ch.

Surround Sound Settings

Surround Sound Set Up

Turtle Beach Ear Force

Phantom headsets have a surround sound feature

bringing additional realism to your gaming experience.

1. Press SURROUND ON/OFF to turn ON the surround sound function.

2. Press the SURROUND ANGLES button on the transmitter to scroll

through six (6) different presets.

3. The bottom 3 LEDs on the transmitter will blink in sequence to indicate

which preset was selected. (The number of blinks indicates which

number Surround Sound Angle is Selected.)

Front Angle; 30 degrees

Rear Angle; 105 degrees

105

FR FL

120

Front Angle; 60 degrees

Rear Angle; 120 degrees

120

Front Angle; 45 degrees

Rear Angle; 120 degrees

135

FR FL

Front Angle; 60 degrees

Rear Angle; 135 degrees

135

Front Angle; 45 degrees

Rear Angle; 135 degrees

150

FR FL

Front Angle; 60 degrees

Rear Angle; 150 degrees

Surround Sound Settings

Bluetooth

Settings

Pairing (Bluetooth) with a phone

Dual Bluetooth Pairing

1. Turn Headset ON.

2. Press and hold Bluetooth MFB Button until LED

ﬂashes Blue and Red.

3. Set mobile phone to Bluetooth search mode.*

4. Choose “Turtle Beach Phantom.”

5. When prompted for a passcode, enter “0000.”

The Turtle Beach Ear Force

Phantom headset can pair with two Bluetooth devices at once. This feature allows for on-line

chat with other gamers and the ability to switch to phone calls instantly. After your Phantom headset is paired with one

device (XBA or PS3), follow the instructions below for dual Bluetooth pairing.

1. Turn off Phantom Bluetooth by holding the headset’s Bluetooth MFB for 4 seconds.

(A voice prompt will announce, “Bluetooth powering off.”)

2. Press and hold Bluetooth Button until LED ﬂashes Blue and Red.

(A voice prompt will announce, “Bluetooth powering on,“ then “Pairing Bluetooth.”)

3. Set device to Bluetooth search mode.*

4. Choose “Turtle Beach Phantom.”

5. When prompted for a passcode, enter “0000.”

(A voice prompt will announce, “Bluetooth Paired.”)

* Your mobile device may operate differently. Refer to the user’s guide for your mobile device.

BT VOL+

BT VOL-

Mobile Phone

via Bluetooth

Bluetooth MFB

Phone Settings

Making Calls

Receiving Calls

•

To make voice-dialed calls, press and hold the BT MFB button for two (2) seconds until you hear a tone. Release the

button and the voice recognition function on your phone will be activated. Speak the name of the person you wish to call.

To de-activate the voice dialing function, press and hold the BT MFB button again for two (2) seconds and release.

•

To make dialed calls, use the number keys on your phone to dial the number. When the call connects, it will

automatically be heard through the headset.

•

To redial, press the BT MFB button twice to hear two tones through the headset. The last number dialed will be dialed again.

•

To speak off-line while using the phone function, press the MUTE button. While the microphone is muted, a tone will

sound every 30 seconds. To de-activate the mute function, press the MUTE button again.

Note: If your phone does not have a redial feature, double clicking on the BT MFB button will initiate the voice dialing

function instead. If your phone has neither the redial nor voice dial functions, a double click on the BT MFB button will

have no effect.

When your Ear Force

Phantom headset is paired with your cell phone, you can make and receive calls. It can also be

used with voice dialing if your phone has a voice dialing function:

You will hear a musical chime when there is an incoming call. Follow the instructions below to answer a call.

•

When receiving calls, a phone ring will sound through the headset. Press the BT MFB button to answer the call.

•

To reject an incoming call, press and hold the BT MFB button for two (2) seconds until you hear a beep. The call will

go to voicemail.

•

You can also ignore the incoming call ring until it stops. This call will also go to voicemail.

Recharging

Headset Recharging

Turtle Beach Ear Force

Phantom headsets feature a rechargeable battery enabling continuous gaming for up to 15

hours. When the headset battery charge is low, a tone will sound every ten (10) seconds. The headset can be charged

without interrupting game-play using the included Headset Charging Cable.

Charging cycle: 6 hours.

The headset will always remain powered on while charging. The LED on the headset will remain a solid RED until the

headset is fully charged, at which point the LED will turn off.

NOTE: The Headset Charging Cable is for charging purposes only. Use the USB Programming Cable for uploading presets.

Charging LED Headset Charging Port

Right Earcup

Heading

Tune your Ear Force

Phantom headset with modes for music, movies and games. It also features several built-in

presets for chat or voice effects.

Game Mode

Presets and Modes

Choose from the following Game Presets:

Choose from the following Chat Presets:

Main: Incorporates Dolby

surround sound processing for an immersive audio experience.

1. Flat: Hear stereo game sound without effects processing or Dolby Surround Sound.

2. Bass Boost: Hear and feel the rumble of deeper bass sound effects.

3. Treble Boost: Boost high frequencies for crisper sounds and greater clarity.

4. Bass Boost + Treble Boost: Rumbling lows and pristine highs come through clearly.

5. Stereo Expander: Stereo processing with a 3D effect that allows you to focus on subtle audio cues.

6. Action Enhancer: Amplify intense sounds from weapons and explosions.

7. Footstep Focus: Focus on the sound of enemy footsteps approaching.

8. Superhuman Hearing: Boosts low volume sounds.

Main: Chat Boost automatically increases the online chat levels during intense gaming sequences, so communication

from teammates isn’t drowned out.

1. Flat: Straight chat with no processing.

2. Chat Focus: Boosts mid-range frequencies for greater concentration on chat.

3. Chat Expander: Widens the virtual sound ﬁeld of chat.

4. Voice Amp: Ampliﬁes chat volume.

5. Hi-Pitch Morph: Morph your voice into a high-pitch tone.

6. Lo-Pitch Morph: Bring your voice to demonic depths.

7. Robot: Transform your voice into a metallic sound.

8. Max Chat: Combines presets in an enhanced chat package.

Music Mode

Optimal stereo processing for concert-like sound.

Movie Mode

Multi-channel immersion into the action.

Multi-channel immersion while optimizing for competitive play.

Chat Presets

Chat presets can be used regardless of what mode you are using.

Mode Button

Game and Chat /

Mic Presets

Presets and Modes

Navigating through Presets and Modes

•

Tap the Game/Chat Preset buttons to cycle through your alternate (1-8) Game/Chat Presets.

•

Hold the Game Presets Button for 1 second to switch to your Main Game Preset.

•

Hold the Chat/Mic Presets Button for 1 second to switch to your Main Chat Preset.

•

Tap the Mode Button to switch to your Main Game and Chat Presets simultaneously.

•

Hold the Mode Button for 1 second to toggle between Game, Movie, and Music mode.

Presets/Speciﬁcations

Custom Presets

Speciﬁcations

Plug your Ear Force

Phantom headset into your Windows computer to load custom presets available on our

website: www.TurtleBeach.com/presets. Refer to the “Advanced Sound Editor” available on our website

for detailed instructions.

- Speaker Dimension: 50mm

- Speaker core: Neodymium magnets

- Speaker Impedance: 32Ω

- Speaker Frequency Response: 20Hz - 20KHz

- Headphone Ampliﬁer: stereo

- Output Power: 5mW/ch @ 32 ohm

- Earcup Style: Around Ear

- Cushion material: Foam

- Earcushion Material: Protein Leather

- Headband Design: Metal

- Headband cushion: Foam

- Headband Materia: Fabric/Leather

- Acoustic design: Closed

- Acoustic FR: 20Hz - 20KHz

- Sound Pressure Level: 120dB @1KHz

- Total Harmonic Distortion: < 0.1%

Page is loading ...

Turtle Beach Earforce Phantom - Call of Duty Ghosts User manual

Brand: Turtle Beach

Model: Earforce Phantom - Call of Duty Ghosts

Category: Headsets

Type: User manual

This manual is also suitable for

Download PDF

report

in other languages

italiano: Turtle Beach Earforce Phantom - Call of Duty Ghosts Manuale utente

Turtle Beach Earforce Phantom - Call of Duty Ghosts User manual

This manual is also suitable for

Turtle Beach Earforce Phantom - Call of Duty Ghosts User manual

in other languages

Related papers

Other documents