Luxor AVJ42KBN User manual

  • Hello! I've reviewed the provided instructions for assembling the keyboard shelf for metal carts. This document includes a parts list and step-by-step instructions using diagrams to help you correctly assemble the shelf. I'm ready to answer any questions you have about the assembly process or the components involved.
  • What parts are included in the kit?
    What tool is needed for the assembly?
    How should the pullout shelf H be installed?
Pullout Keyboard Shelf Instructions
for Metal Carts
(Back)
(Front)
FR
FL
A
A
FR
FL
H
Collect part: H. Align the pullout shelf H runner so that the runner
snaps into place into the FL & FR brackets. Pull the shelf out to
make sure it is fully seated. Tighten screws A.
Pullout keyboard shelf assembly is now complete.
www.luxorfurn.com
6/07/18
Parts List
Tools in this step:
H x1
FL x1
FR x1
A x4
Take top shelf of metal cart and lay on side.
Collect parts: FL, FR and A. Align brackets with screw holes on top of shelf.
Insert screw A and tighten with screwdriver.
Do not fully tighten until shelf is attached.
Insert screw through the aligned screw hole
of and and fasten nut with wrench and
allen wrench. Place Non-slip mat on desired shelf.
The cart is now complete.
Tools in this step:
x1 x1
12/05/17
/