Pullout Keyboard Shelf Instructions
for Plastic Carts
- Phillips Screwdriver
(Back)
(Front)
(Handle)
FR
FR
FL
FL
H
A
A
NOTICE:
Size and style of the
plastic ribbed shelf may
vary by model number.
Take the top shelf of your plastic cart and lay it at. Collect parts:
FL, FR & A. Align FR & FL to the outer holes at the top of the shelf.
Take screw A and fasten with a screwdriver, do not tighten fully until
keyboard is attached.
Collect parts: H. Align the pullout shelf H runner so that the runner
snaps into place into the FL & FR brackets. Pull the shelf out to
make sure it is fully seated. Tighten screws A. Pullout keyboard
shelf assembly is now complete.
www.luxorfur n.com
www.hwilson.com
08/01/13
Tools Required
Parts List
H x1
FL x1
FR x1
A x4