2. Computers & electronics
  3. Computer components
  4. System components
  5. Interface cards/adapters
  6. Equip
  7. RS232 Serial Port Express Card/34, 1-Port

Equip RS232 Serial Port Express Card/34, 1-Port User manual

  • Hello! I am an AI chatbot trained to assist you with the Equip RS232 Serial Port Express Card/34, 1-Port User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
RS-232 SERIAL
EXPRESS CARD
1-PORT
Expansion | 111829
1
1. Introduction
equip RS-232 Serial Express Card works with various types of RS-232 serial
devices including modems, switches, PDAs, label printers, bar code scanners,
digital cameras and more. It is a perfect solution for users to add a serial console
port to their Notebook/Netbook computer.
Page is loading ...
3
2. Software Installation
Windows 2000 Installation
1. Insert RS-232 Serial Express Card into an available ExpressCard/34 or
ExpressCard/54 slot.
2. Insert the Driver CD into your CD-ROM/DVD.
3. Click “Cancel” when Windows display the Found New Hardware Wizard.
4. Double Click “Setup” icon on Driver CD
E:\RS232\RS232_USB\32bit_Windows.
5. Click “Next” to continue the installation process.
6. Click “Yes” when dialog box appeared.
7. Click “Finish” to finish the installation process.
Windows XP / Vista Installation
1. Insert RS232 Serial Express Card into an available ExpressCard/34 or
ExpressCard/54 slot.
2. Insert the Driver CD into your CD-ROM/DVD.
3. Click “Cancel” when Windows display the Found New Hardware Wizard.
4. Double Click “Setup” icon on Driver CD
E:\RS232\RS232_USB\32bit_Windows.
5. Screen will exhibit a dialog box as follows.
6. Click “Next” to continue the installation process.
7. Screen will exhibit a dialog box indicating the driver has not passed Windows
4
Logo testing.
8. Click “Continue Anyway”.
9. Click “Finish” to finish the installation process when Installation Wizard
shows such a message.
Verifying the Installation
1. Right click on “My Computer” icon, select “Manager”, left click on
“Device Manager”.
2. Click “Ports”, if there is no exclamation mark (!) or question mark (?) in front
of USB to Serial Bridge Controller (COMx).
The driver has installed correctly.
5
2.1 Setting Baud Rate
Follow the instructions in this section to set the baud rate correctly.
1. Right click on "USB to Serial Bridge Controller {COMx}" icon, select
"Properties", left click on "Port Settings" tab.
2. Click "Bits per second" to setting real baud rate.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
10
Related Products
#111827 USB 2.0 Express Card 2-Port
#111828 eSATA/-USB 2.0 Express Card 2-Port
Please visit us at www.equip-info.net
for more detail.
11
/