Equip USB 2.0 Ultimate Card Reader int. 3.5" User manual
- Category
- Card readers
- Type
- User manual
Manual
www.equip-info.net
USB 2.0 Ultimate Card Reader int. 3.5"
english
Manual_Page 2
www.equip-info.net
Content
1. Package contents
____________________________________________________________________________
3
2. Layout
________________________________________________________________________________________________
3
3. Hardware Installation
_____________
___________________________________________________________
3
4. 4-pin USB Connector
________________________________________________________________________
4
5. USB Pin-out Header
________________________________________________________________________
4
6. Software Installation
________________________________________________________________________
5
7. Functions of Application Software
____________________________________________________
6
A. The File Management Function
____________________________________________________________
6
B. The File-Security Function
____________________________________________________________________
6
C. The Private Disk Function
____________________________________________________________________
7
D. Online Update Function
________________________________________________________________________
8
Manual_Page 3
www.equip-info.net
1. Package Contents
• USB2.0 Ultimate Card Reader internal 3,5"
• Setup CD
• Set of screws
• Front bezel in black
• Front bezel in silver
2. Layout
3. Hardware Installation
1. Turn OFF the power to your computer and all connected peripheral devices.
2. Unplug the power cord from the back of the computer.
3. Remove the computer’s cover.
4. Select an available 3.5" drive bay for mounting the Ultimate Card Reader/Writer,
remove the cover plate from the selected drive bay. Secure the Reader/Writer to the
drive bay by using the supplied mounting screws.
5. Connect the Ultimate Card Reader/Writer with the attached USB cable directly to
the motherboard.
Memory Stick Compact Flash/Microdrive
Secure Digital/
Multi Media Card
Smart Media/
xD Picture Card
Power LED
Activity LED
Manual_Page 4
www.equip-info.net
4. 4-pin USB Connector
Note:
The 4-pin USB Connector is keyed to plug into the 4-pin row of a USB Pin-out Header.
Make sure that the Red wire is plugged into the +5VDC pin on the header.
5. USB Pin-out Header
On most motherboards, the internal USB Pin-out Header consists of 9 pins arranged in 2
rows; each header allows for 2 USB connections (i.e. USB1 and USB2).
Normally, the pins for USB1 and USB2 are in separate rows.
+ 5VDC
DATA -
DATA +
GND
+5VDC
DATA -
DATA +
GND
S-GND
Pin Assignments
red
white
green
black
Manual_Page 5
www.equip-info.net
6. Software Installation
Special Notices:
You MUST install driver before you start to using this card reader.
Plug in your card reader to hardware, and then start to install software.
a. Put the Driver CD into your DVD/CD Drive and double-click the“setup.exe” program to
start the installation procedure.
b. Follow the prompted steps to finish the installation.
c. Please re-start your PC to complete the installation.
d. After re-start, you can now start to enjoy the Card Manager application software.
Don’t forget to insert a memory card first.
Manual_Page 6
www.equip-info.net
7. Functions of Card Manager application software
A. The File Management Function
a. When you insert any memory card into the card reader, the
software will automatically detect the memory card and the
Multi-Window will pop-up.
b. The left window shows the files of the memory card you
just inserted. The right window shows the files of system
disk (it’s default is “c” disk).
c. Most of common functions in Windows are also available
in Card Manager, such like Right-Click menu, View Menu,
New Folder, Upper Layer, Cut/Copy/Paste hotkeys, etc.
d. If more than one memory card is inserted, select the memory card at the path windows
as shown in below screenshot to view its contents (image 2.1).
B. The File-Security Function
Encryption (image 2.2)
a. Select the files or folders you want to encrypt.
b. Right-click and select “Add to C-Media Encryption Box”,
or click the Encrypt hotkey. The file or folders you select
will be encrypted into “Security Box”.
TM
Image 2.1
Image 2.2
Manual_Page 7
www.equip-info.net
Decryption (image 2.3)
a. Click the “Security Box” and input the password.
b. Select the files or folders you want to decrypt, then click
decrypt bottom on the dialog box.
C. The Private Disk Function
Private disk function allows you to create a personal hard
disk with card-key protection. Only when the specified card-
key is inserted, your private disk can be seen. Other users
who have no card-key can not see your disk.
a. Click the hotkey of “Private Disk” (image 2.4).
b. Please specify the size, label, card-key and location you
want to build the personal disk.
c. Click “Make” and key-in a password.
d. Please also set a rescue password, that can remind you
your password, in case that you might have forgotten
your password.
e. Now you can see the private hard disc.
f. Click the hotkey “Private Disk” to manage your private
hard disc (image 2.5).
Image 2.3
Image 2.4
Image 2.5
Manual_Page 8
www.equip-info.net
D. Online Update Function
Online update function allows you to update your card reader with the most update card
specification (please note that some major specification update can not be made due to
hardware limitation).
Therefore please visit www.equip-info.net and search for 128567.
Under “Downloads” you will find the newest driver for your card reader.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
Equip USB 2.0 Ultimate Card Reader int. 3.5" User manual
- Category
- Card readers
- Type
- User manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Equip 351001 Installation guide
-
Equip 351004 Installation guide
-
Equip USB 2.0 Frontpanel 3.5" + Card Reader 30plus User manual
-
-
-
-
-
-
-
