2. Computers & electronics
  3. Computer components
  4. Chassis components
  5. Racks
  6. Rack accessories
  7. Gigabyte
  8. 25HB2-A66122-K0R
25HB2-A66122-K0R

Gigabyte 25HB2-A66122-K0R Installation guide

  • I have reviewed the Rail Kit 25HB2-A66122-K0R Quick Installation Guide and understand the steps for installing, removing the bracket and the chassis. The guide includes important notes such as checking for screw holes and avoiding over bending the spring plate. I am ready to answer your questions about the rail kit and its installation process.
  • What should I do if there is a screw hole on the side of the chassis?
    What should I avoid when installing the rails?
    How to remove chassis?
Remove the Chassis from the RackRemoving Bracket
Rail Kit Quick Installa�on Guide
PN. 25HB2-A66122-K0R
Frontbracket
RearBracket
PushPush
4
Click!
Blue
1
Pulltabforward
White
2
3
4
5
6
Click!
KeyHole-
Release
Caution,donot
overbendthe
springplate.
2
1
Frontbracket
RearBracket
Click!
PushClick!
1
1
23
4
1
2
2
1
3
2
5
1
2
3
3) Install the outer member/bracket assembly to the frame. 4) Insert the chassis to complete the installa�on.
Step 1.
Pull the middle rail fully extended in locked posi�on.
Step 2.
Ensure ball bearing retainer is located at the front of the middle rails.
Step 3.
Insert chassis into middle-outer rails.
Step 4.
When hit a stop, pull / push release tab to unlock and retract chassis into a rack.
Step 5.
Pull the middle rail fully extended in locked posi�on.
Step 1.2.
Loosen shipping screw to pull out chassis.
Step 3.
Pull the disconnect tab forward to remove chassis.
1) Take out the inner rail and slide the intermediate rail back. 2) Install the inner rail onto the chassis.
NOTE! Please check the side of chassis. If there is screw hole reserved on side of
chassis, please fasten at least one M4 screw.
NOTE! Please repeat installa�on step for the other side.
/