Duplo Duprinter DP-22SII User manual

Brand: Duplo

Model: Duprinter DP-22SII

Category: Multifunctionals

Type: User manual

This manual is also suitable for

Store this manual so that it can be retrieved whenever needed.

Instruction Manual

DP-22S /22L /24S

Ver.1

M7-Y1520 2003.08

DP-22S/22L/24S

Instruction Manual

Ver.1

Correct operation and periodic maintenance are

essential for ensuring safe use of this machine.

Thoroughly read this manual before using this

machine.

DUPLO CORPORATION

Duplo building, 1-6, Oyama 4 chome, Sagamihara, Kanagawa 229-1180, Japan

TEL: +81-42-775-3602

FAX: +81-42-775-3606

E-mail : Info@duplo.com

Thank you for your purchase of the Duprinter DP-22SII/22LII/24SII.

To ensure safe and efficient prolonged use of this machine, read and thoroughly understand this manual before

using this machine. After using this manual, be sure to keep it in a place to handy reference.

Introduction

PLEASE NOTE

In the interest of upgrading our products, specifications and other data given in this manual are subject to

change without notice. If the manual contains anything that you do not understand, contact the manufac-

turer for clarification.

00.Introduction 03.8.19, 5:58 PM1

The following is a quick reference to the functions of the DP-22SII/22LII/24SII printer.

B4 Printout

B5 Printout

A4 Document

Enlargement/Reduction ........

(a P.39)

This function copies a document on one standard paper size to another larger or smaller standard paper size.

94% Reduction .......

(a P.40)

This function slightly reduces the size of a document when printing to the same standard paper size as the docu-

ment.

A4 Document A4 Printout

(94%)

Function Quick Reference

1%-Step Enlargement and Reduction .........

(a P.42)

This function enlarges or reduces a document in 1% steps between 50% and 200%.

Document

Printout

00.Introduction 03.8.19, 5:58 PM2

Text/Photograph/Text and Photograph Mode .........

(a P.47)

This function selects the optimum print quality to match the document.

ABCDEFGH

ABCDEFGHIJKLNO

PQRSTUVWXYZ

abcdefghijklmnopqrs

tuvwxyz

ABCDEFGHIJKLNO

PQRSTUVWXYZ

abcdefghijklmnopqrs

tuvwxyz

ABCDEFGHIJKLNO

PQRSTUVWXYZ

ABCDEFGH

ABCDEFGHIJKLNO

PQRSTUVWXYZ

abcdefghijklmnopqrs

Text

Text/Photograph

Photograph

Book Shadow Eraser Mode .........

(a P.60)

This function erases the shadows on the center or edges of book or other folded documents when printing the open

spread.

Document

Printout

With shadow eraser

Without shadow eraser

2 images

4 images

8 images

Document

Multiple Printing .............

(a P.56)

This function prints Multiple images of a document on one page.

00.Introduction 03.8.19, 5:58 PM3

Batch Printing ........

(a P.63)

You can print the specified number of sets of copies in each set.

Document

1st set

5 copies x 2 sets

2nd set

3 copies x 4 sets

3rd set

2 copies x 5 sets

1 1 1

Changing Print Quantity per Document .........

(a P.67)

This function changes the number of prints made from each document.

Documents

1st document

5 copies x 2 sets

2nd document

3 copies x 4 sets

3rd document

2 copies x 5 sets

2-in-1 Layout

Available only with ADF installed

.........

(a P.58)

This function prints two different documents on one page.

Documents

Printout

00.Introduction 03.8.19, 5:58 PM4

Contents

Introduction ......................................................................................................................... 1

Function Quick Reference ................................................................................................. 2

Notes on Safety (Please Read and Observe) ................................................................... 8

Safety Precautions .............................................................................................. 8

Warning Sticker ........................................................................................................ 11

Positioning the Machine ........................................................................................... 12

Maintenance ............................................................................................................. 13

Printing and Duplicating Cautions ............................................................................ 14

Conventions Used in This Manual ............................................................................ 15

Chapter 1 Before Using This Machine

System Setup .................................................................................................................... 18

Part Names and Their Functions ..................................................................................... 19

Printer Appearance .................................................................................................. 19

Control Panel ............................................................................................................ 22

LCD Panel ................................................................................................................ 24

Turning Power ON/OFF .................................................................................................... 25

Turning ON Printer Power......................................................................................... 25

Turning OFF Printer Power ....................................................................................... 26

Standard Mode ......................................................................................................... 26

Key Card Counter [Available only with Key Card Counter installed] ......................... 27

Document/Printing Paper Specification ......................................................................... 28

Acceptable Documents ............................................................................................ 28

Acceptable Printing Paper ........................................................................................ 28

How Platemaking and Printing is Performed ................................................................. 29

Platemaking.............................................................................................................. 29

Printing ..................................................................................................................... 29

Chapter 2 Printing Using Basic Functions

Basic Printmaking ............................................................................................................ 32

Loading and Replacing Paper ......................................................................................... 34

Loading Paper .......................................................................................................... 34

Adjusting Paper Feed Pressure ................................................................................ 35

Loading Documents ......................................................................................................... 36

Positioning the Document......................................................................................... 36

Loading Document on Document Glass Plate ......................................................... 37

Loading Document in ADF [Available only when ADF installed] .............................. 38

Enlargement and Reduction ............................................................................................ 39

Enlarging/Reducing from Standard-Size Document to Standard-Size Paper .......... 39

94% Reduction ......................................................................................................... 40

1% - Step Enlargement and Reduction .................................................................... 42

Selecting Printing Paper Size .......................................................................................... 44

Text/Photograph/Text and Photograph Mode ................................................................ 46

Print Output ....................................................................................................................... 48

Installing Print Tray ................................................................................................... 48

Truing up Printed Pages ........................................................................................... 50

00.Introduction 03.8.19, 5:58 PM5

Contents

Chapter 3 Printing With Various Function

Saving Settings................................................................................................................. 52

Saving Settings ........................................................................................................ 52

Retrieving Settings ................................................................................................... 54

Clearing Settings ...................................................................................................... 55

Multiple Printing on One Page......................................................................................... 56

2-up Function ........................................................................................................... 56

2-in-1 Layout [Available only when ADF installed] .................................................... 58

Book Shadow Eraser Mode ............................................................................................. 60

Adjusting Plate Darkness ................................................................................................ 62

Batch Printing ................................................................................................................... 63

Batch Printing ........................................................................................................... 63

Batch Printing (changing print quantity per document) ............................................ 67

Dividing Sections with Tape [Available only with Tape Cluster Device] ..................... 70

Chapter 4 Miscellaneous Functions

Confidential Safeguard Function .................................................................................... 74

Total Counter Display Function ....................................................................................... 75

Print Speed Adjustment Function ................................................................................... 76

Printing Position Adjustment Function .......................................................................... 77

On-Line Print Function [Available Only With Interface Kit Installed] ........................... 78

Chapter 5 Replacing Consumables

Replacing the Ink Pack..................................................................................................... 80

Replacing the Master Roll ................................................................................................ 83

Replacing the Master Ejection Core ............................................................................... 86

Replacing the Drum Unit .................................................................................................. 88

Removing the Drum Unit .......................................................................................... 88

Installing the Drum Unit ............................................................................................ 90

Chapter 6 Troubleshooting

Countermeasures to Troubles ......................................................................................... 94

Power Does Not Turn ON ......................................................................................... 94

Platemaking/Printing is Not Possible ........................................................................ 94

Error Messages ................................................................................................................. 95

Supplying or Changing Paper While Printing ................................................................ 98

If Paper Runs Out During Printing ............................................................................ 98

Adding Paper While Printing ..................................................................................... 98

Changing Paper Selection While Printing ............................................................... 100

Paper Jams ..................................................................................................................... 102

When “PAPER LEFT JAM” is Displayed (Feed Tray) .............................................. 102

When “PAPER RIGHT JAM” is Displayed (Print Tray) ............................................ 103

When “MAST. EJECT ERROR” is Displayed ................................................................. 106

When “MASTER SET MISS” is Displayed ..................................................................... 109

00.Introduction 03.8.19, 5:58 PM6

Contents

Chapter 7 Specifications and Maintenance

Specifications ................................................................................................................. 114

Appendix

Index ................................................................................................................................ 118

Quick Operation Guide .................................................................................................. 120

00.Introduction 03.8.19, 5:58 PM7

Notes on Safety (Please Read and Observe)

Safety Precautions

Various symbols and pictures are used in this manual and on the stickers affixed to the machine. These symbols and

pictures provide warnings and instructions to prevent danger to you or other personnel, and to prevent damage to office

property. The meanings of these symbols and pictures are explained below.

WARNING

Indicates a high degree of potential danger. If the warning is ignored, death or serious

injury may result.

CAUTION

Indicates a medium degree of potential danger. If the caution is ignored, medium injury or

damage to property may result.

[Examples of Pictorial Symbols]

A circle with a line through it indicates a prohibited action. The particular act prohib-

ited is indicated by a picture inside the circle. (In the example shown here, the prohibited

act is disassembly.)

A black disc indicates an instruction, or sometimes a prohibited action. The instruction

itself is indicated by pictorial symbols drawn in white on the disc. (In the example shown

here, the instruction is “Remove the plug from the outlet.”)

• These are particularly important safety points and should always be observed.

WARNING

If the machine is used after foreign matter (metal fragments, water, or liquid) has entered the

machine, this may result in fire or electric shock.

• Turn the main unit’s power switch OFF, and then remove the power plug from the outlet. Contact

the sales distributor.

If the machine is used after heat, smoke, strange smell, or other abnormality is detected, this may

result in fire or electric shock.

• Turn the main unit’s power switch OFF, and then remove the power plug from the outlet. Contact

the sales distributor.

Use only the power cord that is provided among the accessories.

00.Introduction 03.8.19, 5:58 PM8

Notes on Safety (Please Read and Observe)

WARNING

Do not modify the machine.

• Doing so may result in fire or electric shock.

Do not remove the rear lid, cabinet, or covers from the machine.

• The inside of the machine contains high-voltage parts, which may cause electric shock.

Do not remove or insert the power plug with wet hands.

• Doing so may result in electric shock.

Do not damage, break, or modify the power cord.

• Do not place heavy objects on, tug, or unnecessarily bend the power cord. Doing so may result in

fire or electric shock.

Do not insert or drop metal, flammable material, or other matter through the ventilation holes into

the machine interior.

• Doing so may result in fire or electric shock.

Do not place flower vases, flowerpots, cups, or water containers (including metal containers) on top

of the machine.

• Fire or electric shock may result if liquid spills inside the machine.

Do not use a source voltage other than that specified. Do not connect two or more loads to a single

outlet.

• Doing so may result in fire or electric shock.

Do not place the machine in a humid or dusty area.

• Doing so may result in fire or electric shock.

00.Introduction 03.8.19, 5:58 PM9

Notes on Safety (Please Read and Observe)

CAUTION

Before moving the machine, remove the power plug from the outlet.

• If the cord is damaged, this may result in fire or electric shock.

Remove the power plug itself, not the cord.

• Tugging the cord may damage it (expose conductors, or cause disconnections, etc.), resulting in

fire or electric shock.

Do not place the machine in an unstable position, such as on an unsteady support or sloping area.

• If the machine is dropped or falls over, this could result in personal injury.

Once the machine is in position, secure in place using the casters.

• If the machine falls over, this could result in personal injury.

00.Introduction 03.8.19, 5:58 PM10

L5-T3020

Do NOT touch the drum or rollers

when you operate the jog switch.

Do NOT put hands Inside

machine while it is operatung.

Hands could get caught up

or crushed.

WARNING

Notes on Safety (Please Read and Observe)

Warning Sticker

Keep the WARNING stickers clean at all times. If stickers become damaged or come off, replace them with new ones.

No. Parts No. Name Q’ty

q L1-T3060 Warning Sticker 1 1

w L5-T3020 Warning Sticker 2 1

L1-T3060

WARNING

● Do not remove this cover. The inside of the printer contains movable cutting instruments,

contact with which could result in injury.

00.Introduction 03.8.19, 5:58 PM11

Positioning the Machine

Installing the machine on a flat, stable surface.

Avoid installing the machine in a dusty area.

Avoid installing the machine in the direct sunlight or heat,

such as near a stove. Ink may deteriorate and may cause

bad prints, while the machine may indicate errors due to

overheating caused by sunlight. Also avoid hot, cold, or

humid areas since paper may absorb moisture, causing

paper jams or wrinkles.

Notes on Safety (Please Read and Observe)

00.Introduction 03.8.19, 5:58 PM12

Maintenance

Clean the exterior of the machine as described below.

Tightly wring a soft cloth that has been moistened with

water or neutral detergent, and wipe dirt from the ma-

chine’s surface.

Never use alcohol or organic solvents. Doing so may

discolor or damage the machine exterior.

Dust and clean the machine at least once a week to avoid

breakdowns.

Before cleaning, turn the power switch OFF, and then

remove the power plug from the outlet.

To clean the reader glass, use a dry, soft cloth and lightly

wipe off any dirt.

WARNING

• Before cleaning, remove the power plug from the outlet.

Doing so may result in fire or electric shock.

• Prevent water and neutral cleansers from getting inside the machine. If liquids spill inside the ma-

chine, contact your agent immediately. Using the machine with water spilled inside may result in fire or

electric shock.

Notes on Safety (Please Read and Observe)

00.Introduction 03.8.19, 5:58 PM13

Notes on Safety (Please Read and Observe)

Printing and Duplicating Cautions

There are restrictions on what you may print on this printer. Please be aware that there are some printed materials that

are illegal even to possess.

1. Printed Matter Banned by Law

• Paper money, currency, government bonds and national and local bonds cannot be duplicated, even if they are

stamped with the “sample” seal.

• Paper money, currency and bonds, etc. that are valid in a foreign country cannot be duplicated.

• Unused postage stamps and postcards cannot be duplicated without government consent.

• Government-issued papers pertaining to stamps, liquor and sales tax laws cannot be duplicated.

2. Printed Matter that Require Caution

• Printed-issued securities (stocks, bills and checks, etc.), passes and tickets require caution in duplicating unless a

business is duplicating them for required number for their own business needs.

• Government-issued passports, public- and private-issued driver’s licenses, permits, IDs, passes, food stamps, etc.

require caution in duplicating.

3. Copyrighted Materials

Books, music, artwork, prints, maps, diagrams, movies, photography, etc. are banned from duplicating outside the

limits of private home use and their related non-sale usage.

00.Introduction 03.8.19, 5:58 PM14

Printing Using Basic Functions

A5 Document

A4 Printout

A3 Document

Enlargement and Reduction

Enlarging/Reducing from Standard-Size Document to Standard-Size Paper

You can enlarge or reduce a standard-size document onto standard-size printing paper.

The following zoom ratios are available when enlarging or reducing a standard-size document onto standard-size

printing paper.

■ Enlargements

You can enlarge a standard-size document onto standard-size paper using the following zoom ratios:

● European paper sizes

<DP-22SII>

A5 → A4 .................... 141%

A5 → B5 .................... 122%

B5 → A4 .................... 115%

● U.S. paper sizes

<DP-22LII>

141%

ST → LT ..................... 129%

121%

■ Reductions

You can reduce a standard-size document onto standard-size paper using the following zoom ratios:

● European paper sizes

<DP-22SII>

A4 → B5 ...................... 86%

B4 → A4 / B5 → A5 .... 81%

A3 → A4 / B4 → B5 ....70%

● U.S. paper sizes

<DP-22LII>

LGL→ LT .....................77%

11×17→ LT .................. 74%

11×17→ LT .................. 64%

IMPORTANT

• Set the desired zoom ratio before starting the platemaking process.

Press

(ENLARGEMENT) key or

(RE-

DUCTION) key.

<DP-24SII>

B5 → B4 / A5 → A4 .. 141%

A4 → B4 / A5 → B5 .. 122%

B5 → A4 .................... 115%

<DP-24SII>

A3 → B4 / A4→ B5 .....86%

B4 → A4 / B5 → A5 .... 81%

A3 → A4 / B4 → B5 ....70%

STD STD

1:1

Notes on Safety (Please Read and Observe)

Conventions Used in This Manual

Each page of descriptions in this manual of how to operate the DP-22SII/22LII/24SII is set up as follows.

■ Pictorial Symbols and Other Notations Used in This Manual

IMPORTANT : Introduces instructions for correct operation of the machine. If these instructions are ignored,

the machine may not be able to operate at optimum performance or may break down.

Tip : Introduces information that is useful for operation and maintenance of the machine, or

information about the machine’s performance, etc.

Continue Page

•••

: Indicates that the description of the operating sequence is continued on the next page.

(a P.00 “xxxx”) : Indicates the page number and item containing related information.

In the text of this manual, keys are indicated as follows:

(PLATE MAKING) key

Title (Function)

Description of function and

example of printing

The illustration is designed to

indicate the result of using the

selected function.

Description of operational steps

Each step is described in detail.

Illustrations

The illustrations provide a visual

reference to which keys to operate

and other related conditions.

00.Introduction 03.8.19, 5:59 PM15

00.Introduction 03.8.19, 5:59 PM16

Before Using This Machine

Chapter 1

Before Using This Machine

This chapter contains essential information such as the names of the machine parts, the

names and functions of keys, etc., on the control panel, and the sizes of documents and

printing papers that you can use. Please be sure to read this chapter carefully before

attempting to use the printer.

System Setup ..................................................................................................... 18

Part Names and Their Functions ...................................................................... 19

Printer Appearance ...................................................................................... 19

Control Panel ............................................................................................... 22

LCD Panel.................................................................................................... 24

Turning Power ON/OFF ...................................................................................... 25

Turning ON Printer Power ............................................................................ 25

Turning OFF Printer Power .......................................................................... 26

Standard Mode ............................................................................................ 26

Key Card Counter [Available only with Key Card Counter installed] ............ 27

Document/Printing Paper Specification .......................................................... 28

Acceptable Documents ................................................................................ 28

Acceptable Printing Paper ........................................................................... 28

How Platemaking and Printing is Performed .................................................. 29

Platemaking ................................................................................................. 29

Printing......................................................................................................... 29

01.chapter 1 03.8.19, 5:59 PM17

System Setup

The machine and its optional equipment are set up as follows:

Personal computer

Key card counter

Duplo Direct Print System

Documents prepared on a

personal computer can be

printed on this machine.

PC interface kit is required

to connect this machine to

a personal computer.

ADF

Cabinet

Tape cluster

Drum unit

: Option

01.chapter 1 03.8.19, 5:59 PM18

Before Using This Machine

Part Names and Their Functions

Printer Appearance

No. Name Function

q Document cover Keeps the document in contact with the document glass plate.

w Feed tray descend switch Press to lower the feed tray.

e Feed pressure adjuster lever Use to adjust the paper feed pressure.

r Side guides Slide to match the width of the paper.

t Feed tray Load paper in this tray.

y Support tray Pull out when loading paper.

u Power switch Press to switch the power on and off.

i Cabinet (Option) Place the printer on this stand.

o Castor locks Lock the printer in position on the floor. Always lock the castor

locks when installing the printer.

!0 Front cover Open to replace ink pack and drum unit, etc.

!1 Control panel Displays operations and statuses, and sets functions.

Reference

page

32, 38,

25, 26

—

80, 88

01.chapter 1 03.8.19, 5:59 PM19

Page is loading ...

Duplo Duprinter DP-22SII User manual

Brand: Duplo

Model: Duprinter DP-22SII

Category: Multifunctionals

Type: User manual

This manual is also suitable for

Download PDF

report

Duplo Duprinter DP-22SII User manual

This manual is also suitable for

Duplo Duprinter DP-22SII User manual

Related papers

Other documents