Duplo DUPRINTER DP-C115 User manual

Category
Print & Scan
Type
User manual
For this machine to be used safely, it MUST be
operated correctly and serviced regularly. Therefore,
read this Instruction manual thoroughly before using
the machine.
Keep this manual in a safe place where it can be consulted at any time.
DUPLO CORPORATION
DUPRINTER
DP-C100/105/110/115/120/125
Instruction Manual
Complies with the provisions defined by the regulations listed below.
EC Low Voltage Directive ( 73 / 23 / EEC )
EC Electromagnetic Compatibility Directive ( 89 / 336 / EEC )
Copyright 2007
DUPLO SEIKO CORPORATION
All Rights Reserved
- 1 -
Introduction
Thank you for your purchase of the
DUPRINTER DP-C100/105/110/115/120/125
To ensure safe and efficient prolonged use of this machine, read and thoroughly unders
tand
this manual before using this machine. After using this manual, be sure to keep it in a
place to handy reference.
PLEASE NOTE
In the interest of upgrading our products, specifications and other data given in this
manual are subject to change without notice. If the manual contains anything that you
do not understand, contact the manufacturer for clarification.
Precautions for printing and duplicating
There are restrictions on what you may print on the printer.
Please be aware that there are some printed materials that are illegal
even to possess.
1. Printed matters banned by law
¡¡
Paper money, currency, government bonds and national and local
bonds cannot be duplicated, even if they are stamped with the
"sample" seal.
¡
¡
Paper money, currency and bonds, etc. that are valid in foreign
country cannot be duplicated.
¡¡
Unused postage stamps and postcards cannot be duplicated
without governmental consent.
¡¡
Government-issued papers pertaining to stamps, liquor and sales
tax laws cannot be duplicated.
2. Printed matters that need caution
¡
¡
Private-issued securities(stocks, bills and checks, etc.), passes and
tickets needs caution in duplicating unless a business is
duplicating them for needed amounts for their business needs.
¡¡
Government-issued passports, public-and private-issued driver`s
licenses, permits, identifications, food stamps, etc. will need
caution in duplicating.
3. Copyrighted materials
Books, music, artwork, prints, maps, diagrams, movies, photography,
etc. are banned from duplicating outside the limits of private home
use and their related non-sale usage.
4
. Various functions 26
3
. Platemaking and printing procedure 21
2
. Easy printing 19
Safety Precautions 44
- 2 -
Contents
Adjusting the mode of document
26
Adjusting the plate darkness
26
Changing the printing speed 27
Adjusting the printing position
27
Setting the enlargement and reduction
28
29
29
30
30
When using a thick paper and/
or misfeed occurs
34
When using a thin paper and/or
35
Confidential safeguard function
To set confidential safeguard function
To clear
30
Sectional printing
(stopping after each set)
31
Drum unit
34
Changing the drum unit
Setting the drum unit
Setting the paper tray 21
Setting the paper stacker
22
Turning the power on
23
Checking the control panel
23
Setting the document 24
Pressing the platemaking key 24
Entering the number of printed copies 25
Pressing the print key 25
Easy printing
19
1
. Before using the machine 11
Part names and their functions
11
Control panel(A/B) 14
Printing process 18
Control panel(LEAGAL) 16
94% Reduction 28
On-Line Print Function
33
(model :
DP-C105/115/125
only)
31
6
. Troubleshooting 43
5
. Replacing consumables 37
- 3 -
Changing the ink pack 37
Changing the master roll 39
Changing the master ejection core 42
OK Monitor
43
Removing a left paper jam
(feed tray side)
47
Removing a right paper jam
(print tray side) 48
Removing a master(eject error) 50
Removing a master(set error) 52
Removing a jammed document 54
Trouble shooting for machine malfunction
55
2
3
4
5
1
6
7
8
7
. Maintenance and inspection 56
Maintenance 56 Total counter 57
8
. Specifications 58
Specifications
58 Original document/
copy paper specification 60
- 4 -
Safety Precautions
Various symbols and pictures are used in this manual and on the stickers affixed
to the machine. These symbols and pictures provide warnings and instructions to
prevent danger to you or other personnel, and to prevent damage to office
property. The meanings of these symbols and pictures are explained below.
Indicates a high degree of potential danger. If the warning is
ignored, death or serious injury may result.
Indicates a medium degree of potential danger. If the
caution is ignored, medium injury or damage to property
may result.
WARNING:
CAUTION:
A circle with a line through it indicates a prohibited action. The particular
act prohibited
is indicated by a picture inside the circle. (In the example
shown here, the prohibited act is disassembly.)
A black disc indicates an instruction, or sometimes a prohibited action.
The instruction
itself is indicated by pictorial symbols drawn in white on
the disc. (In the example shown here, the instruction is "Remove the
plug from the outlet.")
About Machine Safety
Examples of pictorial symbols
- 5 -
Safety Precautions
WARNING
¡¡
If the machine is used after foreign matter (metal fragments,
water, or other liquid) has gotten inside the machine, fire or
electrical shock can result.
aa
Turn the main unit`s power switch to OFF.
Pull the power plug from the outlet.
Contact the sales distributor (or maintenance service
company).
¡¡
If the machine is used after heat, smoke, strange smell, or other
abnormality is detected, fire or electrical shock can result.
aa
Turn the main unit`s power switch to OFF.
Pull the power plug from the outlet.
Contact the sales distributor (or maintenance service
company).
¡¡
Use only the power cord that is provided among the
accessories.
Insert the power cord plug firmly into the socket, so that
proper electrical contact is effected.
aa
Use of any other power cord could result in imperfect
grounding.
If grounding is imperfect and electrical leakage occurs, fire or
electric shock could result.
¡¡
Do not modify the machine.
Fire or electrical shock can result.
¡¡
Do not remove the rear lid, cabinet, or cover from the
machine.
The interior contains high-voltage parts, which can cause
electrical shock.
¡¡
Do not remove or insert the power plug if your hands are wet.
You can get electrically shocked.
¡¡
Do not damage, break, or modify the power cord.
Do not place heavy objects on it, yank it, or unreasonably
bend it.
Fire or electrical shock can result.
- 6 -
WARNING
¡¡
Do not insert or drop metal, burnable material, or other matter
through the ventilation holes into the machine interior.
Fire or electrical shock can result.
¡¡
Do not place flower vases, flowerpots, cups, or water
containers (including metal containers) on top of the
machine.
Fire or electrical shock can result if the liquid spills.
¡
¡
Do not use a source voltage other than that specified.
Do not connect multiple loads to a single outlet.
Fire or electrical shock can result.
¡¡
Before cleaning, pull the power plug from the outlet.
¡
¡
Prevent water and neutral cleansers from getting inside the
machine.
This action prevents not only breakdowns but electrical shock.
Maintenance
aa
Refer to page 51
- 7 -
Safety Precautions
WARNING
¡¡
Before moving the machine, pull the power plug from the
outlet.
If the cord is damaged, fire or electrical shock can result.
¡¡
Pull the power plug itself, not the cord.
If you yank the cord, you can damage it (cause exposed
conductor, disconnection, etc.), resulting in fire or electrical
shock.
¡¡
Do not place the machine in an unstable position, such as on
an unsteady support or sloping area.
If the machine drops or falls over, a person could get injured.
¡¡
Do not place the machine in a humid or dusty area.
Fire or electrical shock can result.
- 8 -
WARNING
- 9 -
Safety Precautions
1Caution Sticker 1M7-T3060
e
¡¡
Keep the WARNING and CAUTION stickers clean at all times.If stickers become
damaged or come off, replace them with new ones.
J3-T3200
Warning
¡Do not remove this cover. The
inside of the printer contains
movable cutting instruments,
contact with which could result
in injury.
L5-T3020
Do NOT touch the drum or rollers
when you operate the jog switch.
Do NOT put hands Inside
machine while it is operating.
Hands could get caught up
or crushed.
WARNING
No. Parts No. Name Q´ty
q
J3-T3200 Warning Sticker 1 1
w
L5-T3020 Warning Sticker 2 1
Locations of warning stickers
(3)
M7-T3060
CAUTION
(1)
(2)
- 10 -
Introduces instructions for correct operation of the machine.
If these instructions are ignored, the machine my not be able
to operate at optimum performance, or may break down.
Introduces information that is useful for operation and
maintenance of the machine, or information about the
machine’s performance, etc.
IMPORTANT
:
Note
:
Conventions Used in this Manual
Indicates a high degree of potential danger. If the warning is
ignored, death or serious injury may result.
Indicates a medium degree of potential danger. If the
caution is ignored, medium injury or damage to property
may result.
WARNING:
CAUTION:
GUIDE TO THIS MANUAL
Before using the machine
1
MACHINE EXTERIORS
DOCUMENT RECEIVING TRAY
DOCUMENT GUIDE
DOCUMENT TRAY
SUPPORT TRAY
SUPPORT TRAY
CONTROL PANEL
FRONT COVER
INK PACK HOLDER RELEASE LEVER
DRUM HANDLE
FRONT COVER
DRUM UNIT
INK PACK
DRUM SECURING LEVER
POWER SWITCH
SUPPORT TRAY
DOCUMENT
TRAY
PAPER TRAY
ADF
¡¡
This lever lock or unlocks the drum
in/from the home position.
- 11 -
Parts Names and Their Function
1. Before using the machine
DOCUMENT RECEIVING TRAY
THERMAL HEAD ESCAPE LEVER
ROLL MASTER
MASTER HOLDER
FEED PRESSURE LEVER
PAPER TRAY
PAPER GUIDE
GUIDE LOCK SCREW
PAPER SET LEVER
PAPER FEED ROLLER
MASTER SET SWITCH
- 12 -
Before using the machine
1
JOG SWITCH
PAPER STRIPPER FINGER
MASTER EJECTION CORE
DOCUMENT TRAY
MASTER EJECTION BOX
PAPER STACKER GUIDE
PAPER RECEIVING TRAY
MASTER EJECTION BOX
LID RELEASE LEVER
MASTER EJECTION BOX
RELEASE LEVER
PAPER EJECTION ROLLER
JUMP PLATE
PAPER STOPPER
- 13 -
- 14 -
CONTROL PANEL(A/B)
No. Components Functions
(1)
indicates the position of enlargement and reduction.
Press this key,the enlargement and reduction is changed.
Indicates the documeny mode(text or photo)
Each press of this key switches between the text mode and
Indicates print number,and error messages.
Returns the control panel settings back to the standard mode.Hold down
The printing position is adjusted with these keys.
The lamp for the specified printing position lights.
The lamp for the specified printing speed lights.
The printing speed is adjusted with these keys.
(1)
(2) (3) (4) (5)

photograph mode.
for at least 0.5 second.
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
Zoom indicator lamp
Enlargement and reduction key
Document indicator lamp
"Document" key
LED panel
"All clear" key
Printing position adjustment
key
Printing position indicator lamp
Printing speed adjustment key
Printing speed indicator lamp
"Test print"key
Prints one copy.This is used to check the image positig and contrast.
- 15 -
Before using the machine
1
No. Components Functions
(12)






(17)
(16) (15)
(14)
(13)
(13)
(14)
(15)
(16)
(17)
(18)
(19)
(20)
(21)
(22)
"Stop"key
Stop printing.If this key is pressed while the machine is stopped,the
number of copies and plates will be displayed.
"Print"key
Starts printing.
"Plate making"key
keypad
Starts plate making.
Used for entering the number of prints.
When the numeber of help is set,press this key for save.
" "key
"Clear"key
Clears the display to "0"
"OK" Monitor
LED indicates errors into machine.
"Plate darkness adjustment"key
The lamp for the specified plate darkness lights.
Plate darkness indictor lamp
The plate darkness is adjusted with this key.
"94%" key
The plate of making is ruduction 94%.Apply 94% ruduction.
"94%" indictor lamp
The lamp lights when 94% reduction is on.
!
94%
141%
129%
121%
100% 1:1
77%
74%
64%
MINI LTR
STMT LTR
LGL LTR
LTR STMT
LTR MINI
94%
CONTROL PANEL(LEAGAL)
No. Components Functions
(1)
indicates the position of enlargement and reduction.
Press this key,the enlargement and reduction is changed.
Indicates the documeny mode(text or photo)
Each press of this key switches between the text mode and
Indicates print number,and error messages.
Returns the control panel settings back to the standard mode.Hold down
The printing position is adjusted with these keys.
The lamp for the specified printing position lights.
The lamp for the specified printing speed lights.
The printing speed is adjusted with these keys.
(1)
(2) (3) (4) (5)

(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
- 16 -
Zoom indicator lamp
Enlargement and reduction key
Document indicator lamp
"Document" key
LED panel
"All clear" key
Printing position adjustment
key
Printing position indicator lamp
Printing speed adjustment key
Printing speed indicator lamp
"Test print"key
Prints one copy.This is used to check the image positig and contrast.
photograph mode.
for at least 0.5 second.
- 17 -
Before using the machine
1
No. Components Functions
(12)



(17)
(16)
(13)
(14)
(15)
(16)
(17)
(18)
(19)
(20)
(21)
(22)
PLATEMAKING
TEST PRINT
PRINT
STOP
(15)
(14)
(13)



"Stop"key
Stop printing.If this key is pressed while the machine is stopped,the
number of copies and plates will be displayed.
"Print"key
Starts printing.
"Plate making"key
keypad
Starts plate making.
Used for entering the number of prints.
When the numeber of help is set,press this key for save.
" "key
"Clear"key
Clears the display to "0"
"OK" Monitor
LED indicates errors into machine.
"Plate darkness adjustment"key
The lamp for the specified plate darkness lights.
Plate darkness indictor lamp
The plate darkness is adjusted with this key.
"94%" key
The plate of making is ruduction 94%.Apply 94% ruduction.
"94%" indictor lamp
The lamp lights when 94% reduction is on.
- 18 -
"Printing"
In the "printing" process, the paper which is separated from the stack by the paper feed roller
and the paper separator unit is pressed to the drum by the pressure roller. There are small
holes in the image area of the master that is attached to the drum and ink that seeps from the
hole is transferred to the paper. The paper is separated from the drum unit by the stripper
finger. The paper is delivered to the paper receiving tray.
Printing Process
The DUPRINTER goes through a process of"platemaking" and "printing".
"Platemaking"
In the "platemaking" process, the old master on the drum is removed while the thermal head
creates the scanned image on new master and loads it on the drum.
DRUM
UNIT
ROLL MASTER
THERMAL HEAD
PAPER FEED ROLLER
PAPER
INK
DRUM UNIT
PAPER SEPARATOR UNIT
PRESSURE ROLLER
PAPER EJECTION ROLLER
PAPER STRIPPER FINGER
PAPER RECEIVING TRAY
MASTER EJECTION
BOX
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64

Duplo DUPRINTER DP-C115 User manual

Category
Print & Scan
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI