Ricoh DD 5450 is an advanced digital duplicator that offers versatile printing capabilities for various office needs. With its user-friendly interface and range of features, it's ideal for producing high-quality prints, copying documents, and enhancing workflow efficiency.
Ricoh DD 5450 is an advanced digital duplicator that offers versatile printing capabilities for various office needs. With its user-friendly interface and range of features, it's ideal for producing high-quality prints, copying documents, and enhancing workflow efficiency.
For safe and correct use, be sure to read the Safety Information in
Read This First before using the machine.
Troubleshooting
Basic Operations
Before Use
Operating
Instructions
i
Introduction
PLEASE NOTE
Contents of this manual are subject to change without prior notice.
Some illustrations in this manual might be slightly different from the machine.
Certain options might not be available in some countries. For details, please contact your local
dealer.
This manual contains detailed instructions and notes on the operation and use of this machine. For
your safety and benefi t, read this manual carefully before using the machine. Keep this manual in a
handy place for quick reference.
Tape Dispenser Type D1 is optional units for DD 5450 below.
ii
Safety Information
When using this machine, the following safety precautions should always be followed.
Safety During Operation
Indicates a potentially hazardous situation which, if instructions are not followed, could result in
death or serious injury.
Indicates a potentially hazardous situation which, if instructions are not followed, may result in
minor or moderate injury or damage to property.
WARNING
CAUTION
Safety Precautions to Be Followed
This section explains safety precautions that should always be followed when using this machine.
Environments where the machine can be used
This section explains safety precautions about environments where the machine can be used.
In this manual, the following important symbols are used:
● Do not place vases, plant pots, cups, toiletries, medicines, small metal objects, or containers
holding water or any other liquids, on or close to this machine. Fire or electric shock could
result from spillage or if such objects or substances fall inside this machine.
WARNING
● Keep the machine away from humidity and dust. Otherwise a fi re or an electric shock might occur.
● Do not place the machine on an unstable or tilted surface. If it topples over, an injury might occur.
Handling power cords and power cord plugs
This section explains safety precautions about handling power cords and power cord plugs.
● It is dangerous to handle the power cord plug with wet hands. Doing so could result in electric shock.
WARNING
● Do not use power cords that are damaged, broken, or modifi ed. Also, do not use power cords
that have been trapped under heavy objects, pulled hard, or bent severely. Doing so could
result in fi re or electric shock.
iii
● If this machine is not going to be used for several days or longer at a time, disconnect its power
cord from the wall outlet.
CAUTION
● When disconnecting the power cord from the wall outlet, always pull the plug, not the cord.
Pulling the cord can damage the power cord. Use of damaged power cords could result in fi re
or electric shock.
Handling the main machine
This section explains safety precautions about handling the main machine.
● If metal objects, or water or other fl uids fall inside this machine, you must turn off its power
immediately. After turning off the power, be sure to disconnect the power cord plug from the
wall outlet. Then contact your service representative and report the problem. Do not use the
machine. Doing so could result in fi re or electric shock.
WARNING
● If the machine emits smoke or odours, or if it behaves unusually, you must turn off its power
immediately. After turning off the power, be sure to disconnect the power cord plug from the
wall outlet. Then contact your service representative and report the problem. Do not use the
machine. Doing so could result in fi re or electric shock.
● Unplug the power cord from the wall outlet before you move the machine. While moving the
machine, take care that the power cord is not damaged under the machine. Failing to take
these precautions could result in fi re or electric shock.
CAUTION
Handling the machine’s interior
This section explains safety precautions about handling the machine’s interior.
● Do not remove any covers or screws other than those explicitly mentioned in this manual.
Inside this machine are high voltage components that are an electric shock hazard. Contact
your sales or service representative if any of the machine’s internal components require
maintenance, adjustment, or repair.
● Do not attempt to disassemble or modify this machine. Doing so risks burns and electric shock.
WARNING
iv
● Pictorial Symbols and Other Notations Used in This Manual
IMPORTANT
REFERENCE
Continue Page
…
: Introduces instructions for correct operation of the machine.
If these instructions are ignored, the machine may not be able to
operate at optimum performance or may break down.
: Introduces information that is useful for operation and maintenance
of the machine, or information about the machine’s performance,
etc.
: Indicates that the description of the operating sequence is continued
on the next page.
In this manual, important items are described using symbols. Please be sure to read the
descriptions marked with the followings. Each symbol and notation means as below.
v
● Positions of WARNING and CAUTION labels
● This machine has labels for WARNING and CAUTION at the positions shown below. For
safety, please follow the instructions and handle the machine as indicated.
Do not touch blade!
WARNING
ล᥋ゐ⚗Ṇ
L1-N5310
Q3-T1050
1
2
1.
2.
Do not touch or keep your hands or fi ngers away from it. An injury is
caused because it’s sharp.
Do not touch or keep your hands or fi ngers away from it. An injury is
caused because it’s sharp.
vi
Chapter 2
Chapter 3
Contents
Chapter 1
Introduction
..................................................................................................
i
Safety Information
.......................................................................................
ii
Safety During Operation
............................................................................
ii
Safety Precautions to Be Followed
............................................................
ii
● Pictorial Symbols and Other Notations Used in This Manual
.............
iv
● Positions of WARNING and CAUTION labels
.......................................
v
Before Use
Operation Screen
........................................................................................
2
Prints/Sets Entry Screen
...........................................................................
2
Setting a Tape Roll
.....................................................................................
3
Replacing the Tape Roll
............................................................................
3
Basic Operations
Setting Tape Dispenser
..............................................................................
8
Basic Printing
.............................................................................................
9
Troubleshooting
Error Messages
.........................................................................................
14
Chapter
1
1
Before Use
This chapter describes screen of Control Panel.
Before Use
Operation Screen
..................................................................................................
2
Prints/Sets Entry Screen
....................................................................................
2
Setting a Tape Roll
................................................................................................
3
Replacing the Tape Roll
.....................................................................................
3
2
Operation Screen
Prints/Sets Entry Screen
3
1
Before Use
Setting a Tape Roll
Replacing the Tape Roll
The LED on the tape dispenser unit fl ashes when the unit
runs out of the tape.
“TAPE DISPENSER EMPTY OPEN TAPE DISPENSER
COVER” is displayed on digital duplicator LCD.
Open the cover of the tape dispenser unit.
Remove the tape core while pressing down the
stopper.
Lift the lever until it clicks.
REFERENCE
Continue Page
…
4
Setting a Tape Roll
Return the lever.
The blade to cut the tape is uncovered.
Do not touch or keep your hands or
fi ngers away from it.
If the tape core is not locked correctly, the tape
is not fed correctly.
Set the end of the tape as shown in the
fi gure.
Pull out the end of the tape for about 3 cm
from the blade.
Set the tape roll.
Make sure that the tape core is surely locked at the
stopper.
WARNING
When setting the tape, make sure that there is
no slack in the tape.
When the tape is slack, the tape dispenser may
fail to eject the strip properly.
IMPORTANT
IMPORTANT
3cm
Blade
5
1
1
Setting a Tape Roll
Before Use
Close the cover.
When the cover is closed, the unit cuts the tape.
Do not put your hands or fi ngers in the
blade section. Doing so may cause
injury.
If the tape roll is replaced with a new one before it runs out, the tape is not cut when the
cover is closed.
WARNING
REFERENCE
Chapter
2
2
Basic Operations
Basic Operations
This chapter describes how to set Tape Dispenser and basic operations such as
basic printing.
Setting Tape Dispenser
.........................................................................................
8
Basic Printing
.........................................................................................................
9
8
Setting Tape Dispenser
Turn on the power.
Touch “PROPERTY”.
Touch “PERIPHER”.
Touch “TAPE DISPENSER”.
ON : → A tape strip is inserted between the
sheets after each set of prints.
OFF : → No tape strip is inserted.
Touch “ON”.
TAPE DISPENSER is set.
Touch “END”.
9
2
Basic Operations
Basic Printing
Turn on the power.
Make sure that the main screen appears on the
LCD panel.
Load papers.
(See the Operating Instructions.)
Set the “print tray”.
(See the Operating Instructions.)
Load the document.
(See the Operating Instructions.)
Set the tape dispenser position according to the
paper size.
1. Paper size: A3, B4, A4R, B5R, LD
Set the position to the “B4/A3 11”.
2. Paper size: A4, A5, B5, LT, LG
Set the position to the “B5/A4 8.5”.
Continue Page
…
10
Basic Printing
Touch the part displaying “number of prints”.
Enter the “number of prints” using the NUMERIC
keys.
Press the
X
=
key to set “number of sets”.
Enter the “number of sets” using the NUMERIC
keys.
Press the
X
=
key to set “number of sets”.
Repeat the above steps 9 and 10.
Up to 90 sets can be entered.
REFERENCE
Set functions.
(See the Operating Instructions.)
11
2
2
Basic Printing
Basic Operations
Touch the “OK”.
Setting “number of prints and sets” displays the last-
entered “number of sets” and “number of prints”.
● The MASTER MAKING key is not available
until all the prints entered are completed.
● When you want to stop a print run, press the
STOP key and then press the CLEAR key.
● Batch print setting and sequential batch print
setting can be switched on the entering
screen for the number of prints/sets.
● If you make a mistake, touch the mistaken
value and reenter correct value.
● You can store/retrieve the setting with
“Program” function.
(See the Operating Instructions.)
Press the MASTER MAKING or the PRINT key.
Printing starts from the last-entered set.
REFERENCE
●About tape:
A tape strip is inserted between sheets when printing of specifi ed sheets is completed and
printing of each set is completed. The strip length is the same on standard setting. If you
want to change the length, please call your service representative.
IMPORTANT
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
Ricoh DD 5450 is an advanced digital duplicator that offers versatile printing capabilities for various office needs. With its user-friendly interface and range of features, it's ideal for producing high-quality prints, copying documents, and enhancing workflow efficiency.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI