2. Industrial & lab equipment
  3. Electrical equipment & supplies
  4. Electrical supplies
  5. Electrical wallplates
  6. Intermec
  7. CK3 Series

Intermec CK3 Series Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Intermec CK3 Series Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
You can use the vehicle dock mounting kit to install a vehicle dock on your vehicle.
This kit includes:
• One RAM
TM
mount
• Four #8 screws
• Four #10 screws
• Four Nylok nuts
• One optional offset plate
To install the mounting kit
1 If you need additional cable clearance between the vehicle dock and the RAM
mount, use four #8 screws to attach the offset plate to the vehicle dock.
2 If you attached the offset plate in Step 1, use four #10 screws and the Nylok nuts
to attach the RAM mount to the offset plate.
If you are not using the offset plate, use four #8 screws to attach the RAM
mount directly to the vehicle dock.
3 Attach the RAM mount base to a solid surface on your vehicle.
The CK3 vehicle dock is shown as an example.
Vehicle Dock Mounting Kit Instructions
#8 screw
(4 places)
Nylok nut
(4 places)
#10 screw
(4 places)
Oset plate
Vehicle dock
RAM mount
Worldwide Headquarters
6001 36th Avenue West
Everett, Washington 98203
U.S.A.
tel 425.348.2600
fax 425.355.9551
www.intermec.com
©
2008 Intermec Technologies
Corporation. All rights reserved.
Vehicle Dock Mounting Kit Instructions
*943-095-002*
P/N 943-095-002
/