10-8 Video Digital Evidence Solutions 10-8 Body Camera User manual

Brand
10-8 Video Digital Evidence Solutions
Model
10-8 Body Camera
Category
Drive recorders
Type
User manual
2015r2
User Manual
10-8 Body Camera
2 3
Warranty & Return Information
Warranty Details
• One(1)yearfreereplacementofanyfailedcomponent.
How to Get Support
1. VisittheWarrantyPartsReplacementformonourwebsite:
hp://www.10-8video.com/support/warranty-form/
2. Filloutandsubmittheform.
Shipping Address
10-8VideoDigitalEvidenceSolutions
1423Huntsville,Hwy.
Fayeeville,TN37334
Phone Numbers
(888)788-1048•(931)262-2221
(931)233-1263(FAX)
Copyright © 2011-2015 10-8 Video Digital Evidence Solutions. • All rights reserved.
Disclaimer: 10-8VideoDigitalEvidenceSolutionsreservestherighttomakechangesin
specicationsatanytimeandwithoutnotice.Theinformationprovidedbythisdocument
isbelievedtobeaccurateandreliable.However,noresponsibilityisassumedby10-8Video
DigitalEvidenceSolutionsforitsuse;noranyinfringementsofpatentsorotherrightsof
thirdpartiesresultingfromitsuse.Nolicenseisgrantedunderanypatentsorpatentrights
of10-8VideoDigitalEvidenceSolutions.
Othercompanyandproductnamesmentionedhereinmaybetrademarksoftheirrespective
companies.
10-8 Digital Video Evidence Solutions
1423 Huntsville Hwy.
Fayeeville, TN 37334
Tel: (888) 788-1048 • (931) 262-2221
Fax: (931) 233-1263
World Wide Web: www.10-8Video.com
4 5
Contents
Introduction 6
Overview 6
Package Contents 6
First-Time Usage 7
Body Camera Setup 7
Setting Up the BC-1 Software 7
First-Time Usage 8
Associating a BC-1 Camera with Its Ofcer Account 9
BC-1 Body Camera Diagram 10
Operation 11
Power On/Off 11
Power On: 11
Power Off: 11
Video Recording & Playback 12
Recording Video 12
Stop Recording Video 12
Video Playback 12
Stop Video Playback 12
Recording and Playing Audio 14
Recording Audio 14
Stop Recording Audio 14
Audio Playback 14
Stop Audio Playback 14
Taking a Photo 15
View Photos 15
Exit Playback Mode 15
Charging the Battery 16
Charging Battery with USB Cable 16
Battery Status Icons 16
Factory Reset 17
Software 18
Using the Software 18
Managing Files 18
Viewing a File 18
Editing a File’s Info or “Tags” 19
Deleting Files 19
Backing Up Files 19
Viewing a File’s Access Log 20
Managing Call Types 20
Changing Your Software Password 20
Administrating Software User Accounts 21
Creating a New Software User Account 21
Editing a Software User Account 21
Change Ofcer Name 21
Change User’s Administrator Rights 21
Deactivate a User’s Account 21
User Account Permissions 22
Deleting a Software User Account 22
Reassigning A BC-1 Camera To An Ofcer 23
System Messages 24
LED Status Indicator Lights 24
Audio Indicators 24
Specications 25
6 7
Introduction
Overview
ThisdigitalpoliceenforcementDVRprovidestheocerwithstateofthe
artcapabilitiessuchashigh-denitiondigitalvideorecording,stillimage
capturecapabilities,high-speedUSBdatatransmissionandUSBcharging.
Package Contents
Your10-8BC-1BodyCamerawillhaveshippedwiththefollowingitems,
pleasetakethetimetoconrmyouhavethefollowingitems:
• 1-BodyCamera
• 1-InstructionManual
• 1-12VCarCharger
• 1-120VCharger
• 1-USBCable
• 1-MicCable(Optional)
Thankyouforpurchasingthe10-8BC-1BodyCamera.Topreventany
damagetotheunitcausingareductionofitslifespan,werecommend
readingthisUserManualcarefullybeforeusingthedevice.
BeforeusingyournewBC-1BodyCameraforthersttime,we
recommendperformingthefollowingstepstomaximizetheusabilityof
yournewBC-1BodyCamera.
Body Camera Setup
1. ChargetheBC-1BodyCamerausingthe120Volt,12VoltorUSB
cable.
SeeCharging the Baerysectionfordetails.
2. InstallthesoftwareusingtheInstalling the BC-1 Softwaresection
belowasaguide.
First-Time Usage
Setting Up the BC-1 Software
ThesoftwareisdesignedtoinstalllikeanytypicalWindowsprogram.
ThersttimeyouruntheBC-1softwareyouwillneedtocongureit.This
processonlyneedstobecompletedonce.Read through these instructions
completely before beginning.
1. StarttheBC-1BodyCamerasoftware.Awelcomescreenwilldisplay
whileitisloading.
2. Therstscreenyouwillbepresentedwithwillestablishtheprimary
administratoraccount.Thispersonwillbetheprimaryuserand
softwareadministrator.
3. EntertheAdministrator’susernameandpasswordandclickonthe
“Next” buon.
IMPORTANT!
READ THIS FIRST
For maximum security we recommend using random characters,
symbols and numbers in your password. For more tips on
creating secure passwords read this article: http://goo.gl/vZG9PZ
8 9
First-Time Usage
First-Time Usage
4. Nowchoosethelocationonthecomputer’sharddrivewherevideos
fromyourBC-1BodyCamerawillbestored.Thislocationcanbe
anywhereonthelocalsystemoronanetwork.
5. ChoosewhethertoenabletheAutoDeleteFeatureanditsdurationby
enteringanumberintheboxordisablingitbyleavingtheeldalone.
6. Clickonthe“Next” buontocontinue.
7. Nextyou’llsetupthebasiccalltypesthatwillbeavailabletohelp
ocerscategorizeandtagvideos.ExamplecalltypeswouldbeDUI,
Assault,Domestic,etc.Youcanaddmorelaterifneeded.
7. Clickonthe“Next” buontocontinue.
8. NowyouwillbeaddingocersthatwillbeissuedtheBC-1Body
Cameras.Youwillalsoneedtodecidewhohasadministratorrightsto
thesoftware.
9. Entertheocer’sbadgeID,theirnameandsettheiraccesslevel.The
ocer’sbadgenumberalongwiththedateandtimewillberecorded
oneachvideotheBC-1BodyCamerarecords.
10.Clickonthe“Save Ocer Account” buontosavetheiraccount.
11.Whenyouarenishedaddingoceraccounts,clickonthe“Next”
buonattheboomofthewindow.
12.NowyouaregoingtoassociateeachBC-1BodyCamerawiththe
oceraccountsyoujustsetup.
Administrators have more authority and can change passwords,
review all user videos, etc.
Non-Administrator users can archive and tag videos and only
review videos taken by them.
Ensure the location you choose to store your les has sufcient
space. Video les can consume large amounts of storage space.
Associating a BC-1 Camera with Its Ofcer Account
1. PluginasingleBC-1BodyCameratothecomputer
2. OncethecomputerdetectstheBC-1BodyCamera,theBC-1Body
CamerawillbeepandtheLCDscreenwillturno.
3. Clickonthe“Find Device” buon.Thesoftwareandcomputerwill
searchfortheBC-1BodyCamera.
4. OncethesoftwaredetectstheBC-1BodyCamera,assignanocerto
itbychoosingtheocer’saccountandclickingthe“Assign” buon.
5. WhenthesoftwarehasnishingassigningtheocertotheBC-1Body
CameradisconnecttheBC-1BodyCamerafromthecomputer.
6. Repeatsteps1-6asneeded.Whencomplete,clickthe“Done”buon.
If this is the rst time you have connected the BC-1 Body
Camera to this computer, you may have to wait for your
computer to automatically install the proper drivers.
If you connect the BC-1 Body Camera to a computer and do not
have the software running, it will only charge its battery and you
cannot access the camera’s internal les.
However, if you have the BC-1 Body Camera software running
while the BC-1 Body Camera is connected, you can also use
Windows Explorer to access it as a ash drive.
10 11
BC-1 Body Camera Diagram
IR LEDS
Lens
Recording
Microphone
Speaker
Microphone
USB
LED Status Indicator
Clamp
1.5” LCD Screen
Earphone
Water Tight
Seal
REC/Down
USB Port
Earphone Jack
Talk
Selection
PlayPower
Walkie
Cable
FIG. 1
Body Camera Diagram
Power On/Off
Power On:
1. Pressandholdthe“Power” buonuntilthedevicebeeps.
2. TheLED Status IndicatorwilllightupgreenandtheLCD screenwill
displaythe10-8Videologo.
3. Afterafewminutesofinactivity,thesystemwillthenenterinto
recording standby modeandtheLED Status Indicatorwillremainlit
green.
4. TheLCD screenwilldisplaythecurrentlyrecordinginterfaceand
yourbodycameraisreadytouse.
Power Off:
1. Pressandholdthe“Power”buonforatleastthreeseconds.
2. Thecurrentlewillbesavedtotheinternalstorageandthedevice
willpowerdown.
When the recorder is in standby mode if there is no interaction
with it for more than thirty (30) seconds the LCD screen will turn
off.
The recorder will automatically power off when the battery is low.
Operation
12 13
Operation
Video Recording & Playback
Recording Video
1. Brieypressthe“REC” buonuntiltheLED Status Indicatorlights
upred.TheBC=1BodyCamerawillbeepaudibly.
2. TheBC-1BodyCamerawillenterintoVideo Recording Mode(FIG.2)
andbegintorecord.Itwillsavealeevery10minutes.
Stop Recording Video
1. Pressthe“REC” buonuntiltheLED Status Indicatorlightsup
green.
2. TheBC-1BodyCamerawillenterRecording Standby Mode.(FIG.3)
Video Playback
1. Pressthe“Play” buonuntiltheBC-1BodyCameraentersinto
Playback Mode.(FIG.4)
2. Toplaythecurrentlyrecordingle,pressthe“Play” buonagain.
3. Toplayanotherle,usethe“Selection” buontocyclethroughthe
les.Pressthe“Play” buonwhenyou’vefoundtheletoplayit.
Stop Video Playback
1. Pressthe“Play” buontostopthecurrentlyplayingleandenter
intoPlayback Standby Mode.(FIG.5)
FIG. 2
Video Recording Mode
FIG. 4
Playback Mode
FIG. 3
Video Standby Mode
FIG. 5
Playback Standby Mode
Battery Status Icon
Recording Time
Playback Mode Icon
Play Status
Playing Time
Current Playback Time
Video File Icon
Focus Area Current Date & Time
Current File Number
Recording Status Icon
Remaining Recording Time
Operation
If lighting is insufcient, the recorder will automatically enable
Night Mode and the IR LED. It will automatically return to the
normal recording mode when lighting conditions improve.
14 15
Operation
Operation
Recording and Playing Audio
Recording Audio
1. Pressandholdthe“REC” buonforabout2seconds.
2. TheBC-1BodyCamerawillbeep,andtheLED Status Indicatorwill
lightupyellowindicatingithasbegunrecordingaudioonly.
3. TheLCD ScreenwillshowtheAudio Recording Mode Screen(FIG.6)
Stop Recording Audio
1. Pressthe“REC” buonuntiltheLED Status Indicatorlightsup
green.
2. TheBC-1BodyCamerawillenterRecording Standby Mode.(FIG.3)
Audio Playback
1. Pressandholdthe“Playback” buonuntiltheBC-1BodyCamera
entersintoPlayback Mode.(FIG.4)
2. Usethe“Selection” buontocyclethroughtheles.
3. Toplaythecurrentlyselectedle,pressthe“Play” buon.When
playinganaudiole,theAudio Playback Screenwilldisplay.(FIG.7)
Stop Audio Playback
1. Pressthe“Play” buontostopthecurrentlyplayingleandenter
intoPlayback Standby Mode.(FIG.5)
Taking a Photo
1. MakesuretheBC-1BodyCameraisinRecording Standby Modeby
exitinganycurrentlyactivemode.
2. Pressthe“Selection” buontotakeapictureandtheLED Status
Indicatorwillashred.
View Photos
1. Pressandholdthe“Playback” buonuntiltheBC-1BodyCamera
entersintoPlayback Mode.(FIG.4)
2. Usethe“Selection” buontocyclethroughtheles.
Exit Playback Mode
1. ToexitthePlayback Standby Mode,pressthePowerBuononce.
2. TheBC-1BodyCamerawillreturntotheRecording Standby Mode.
FIG. 6
Audio Recording Mode
FIG. 7
Audio Playback Mode
16 17
Operation
Charging the Battery
Therearethreewaystochargeyour10-8BC-1BodyCamera:
• 120VoltCharger(FastestChargeRate)
• 12Voltcarcharger(Fast)
• USBcableconnectedtoapoweredUSBcomputerport(Slow)
Charging Battery with USB Cable
1. ConnectaUSBcablewithacompatibleconnectortoacomputer.
2. ConnecttheUSBcabletotheUSBportonthebodycamera.
Battery Status Icons
Factory Reset
Pressandholdboththe“Power”and“REC”buonstoresettheBC-1
BodyCameratoitsfactorydefaults.
DuringchargingtheLED Status Indicatorwilllightupred,theLCD
screenwilldisplay“MSDC”andthebaeryicon.After10secondstheBC-1
BodyCamerawillenablethescreensaverfortheLCD.Pressanybuonon
theBC-1BodyCameratoexitthescreensaver.
Whenthebaeryisfullycharged,theredLED Status Indicatorwillturn
oandthebaerystatusiconwilldisplaythe“FullyCharged”icon.
Low Power Not Fully Charged Fully Charged
A new, or completely drained BC-1 Body Camera battery can
take 6-8 hours to charge fully.
Operation
Caution: Do not perform a Factory Reset while recording or while
the device is connected to a computer. Doing so may cause le
corruption and/or damage the internal memory.
18 19
Software
Using the Software
InordertoaccessthelesontheBC-1BodyCamera,thesoftwaremustbe
runningbeforepluggingtheBC-1BodyCameraintoyourcomputer.
1. StarttheBC-1BodyCamerasoftware.
2. Enteryourbadgenumberandsoftwarepasswordtologin.Ifyouare
logginginastheAdministrator,enteryourusernameintotheBadge
Number eld.
3. PlugtheBC-1BodyCameraintoyourcomputerusingthesupplied
USBcable.
4. OncethecomputerdetectsthattheBC-1BodyCamerahasbeen
connectedtoit,theBC-1BodyCamerawillbeepanditsLCDscreen
willturno.
5. AtthispointthesoftwareiscopyingthelesfromtheBC-1Body
Cameratoyourdesignatedstoragelocation.DO NOTdisconnectit
duringthisprocess.
Oncethelesappearinthemaininterfaceyoucanperformanyofthe
followingtasks:
Editing a File’s Info or “Tags”
You must have administrative privileges to edit le information.
1. ClickonceontheTag Iconofleyouwishtoedit.
2. Usetheformthatpopsuptoadd/edit/removeanyrelevant
informationtothemediaclip.
3. Clickthe“Save” buonwithinthepopupwindowtorecordyour
changes..
Deleting Files
It’snotnecessarytodeleteyourlesfromtheBC-1BodyCameraonce
thelesarebackeduptothecentrallerepository.WhentheBC-1Body
Camera’sinternalstorageislledtocapacityitisdesignedtoautomatically
overwritetheoldestles.
Thiseliminatestheneedtoworryaboutmaintaininganemptystorage
card.JustmakesureyourBC-1isregularlysyncedwiththeBC-1Body
CameraSoftwareandallofyourlesarepreserved.
However,forconvenience,wehaveincludedtheabilitytodelete
individuallesviatheadmininterface.
Backing Up Files
EverytimeyouconnectyourBC-1BodyCameratoyourdesignated
computeryourlatestlesareautomaticallycopiedtoyourlerepository.
JustremembertosyncyourBC-1BodyCamerasregularlytoyour
designatedrepositorycomputer.
Managing Files
Fromthemaininterfaceyoucanviewthemedia,tagtheleswithmore
information,printareportonaleandviewthele’saccesslog.
Viewing a File
1. Clickonceonthegreen“Play” iconintherowofleyouwishto
view.
2. Onceloaded,thelewilldisplayinanewwindow.
Software
To save time backing up your les and to reduce le redundancy,
only les that have not already been backed up are copied each
time you connect the BC-1 Body Camera to your computer.
20 21
Viewing a File’s Access Log
Eachtimealeisarchived,accessedoralteredinanywayitisrecorded
inthele’saccesslog.Toaccessale’sindividualaccessreport,clickonthe
Access Log Iconintherowoftheleyouwishtoview.
Managing Call Types
1. Clickonthe“Admin” buonlocatedatthetopofthemainwindow.
2. Inthewindowthatpopsup,clickthe“Manage Call Types” buon
locatedatthetopleftofthewindow.
3. Inthepopupwindowthatappears,youcaneitherdeleteorcreate
newcalltypes.
Changing Your Software Password
ChangingyourpasswordcanonlybedonewhenyourststarttheBC-1
BodyCamerasoftware.
1. StarttheBC-1BodyCamerasoftware.
2. Clickonthe“Change Account Password” buonintheloginwindow.
3. EnteryourbadgenumberorifyouaretheAdministratoryouruser
name.
4. Enteryourcurrentor“old”password.
5. Enteryourdesirednewpassword.
6. Clickthe“Save” buon.
Administrating Software User Accounts
Thefollowingfeaturesareonlyavailabletoanuseraccountpossessingan
Administratoraccountlevel.
Creating a New Software User Account
1. Clickonthe“Admin” buonlocatedatthetopofthewindow.
2. Usetheforminthepopupwindowtodeneanewuseraccount.
3. Fillouttheocer’sbadgenumber,name,passwordandselectwhich
accountleveltheyshouldhaveassignedtothem.
4. Clickthe“Save Ocer Account” buontorecordtheaccounttothe
database.
Editing a Software User Account
Useraccountscanbeaccessedbyclickingonthe“Admin” buonlocated
atthetopofthemainwindow.
Change Ofcer Name
1. Tochangethenameofanocerassociatedwithabadgenumber,
clickonthenameoftheaccountyouwishtoedit.
2. Makeyourchangesandpressthe“Enter” keyonyourkeyboardto
savethechanges.
Change User’s Administrator Rights
• Checkorun-checktheAdmin check boxforthedesiredaccount.
Deactivate a User’s Account
• Checkorun-checktheInActive check boxforthedesiredaccount.
Software
Software
22 23
Software
Software
User Account Permissions
TherearetwolevelsofaccesstotheBC-1BodyCamerasoftware-
“Normal”and“Administrator”.
Administrators can:
• Manageaccounts-create&edit.
• Changetheirpassword.
• Editmedialetagsforallles.
Normal Users Can:
• View&edittagsfortheirles.
• Changetheirsoftwareaccountpassword.
Deleting a Software User Account
Inordertokeepanocer’smediaintactforpossibleuseinafuturecase,
useraccountscannotbedeleted.However,accountscanbedeactivated
usingtheAdminsectionofthesoftware.
Reassigning A BC-1 Camera To An
Ofcer
1. Iftheocer’saccountisn’talreadycreated,dosonow.Seethe
Creating A New Software User Accountsection.
1. PluginasingleBC-1BodyCameratothecomputer
2. OncethecomputerdetectstheBC-1BodyCamera,theBC-1Body
CamerawillbeepandtheLCDscreenwillturno.
3. Clickonthe“Find Device” buon.Thesoftwareandcomputerwill
searchfortheBC-1BodyCamera.
4. OncethesoftwaredetectstheBC-1BodyCamera,assignanocerto
itbychoosingtheocer’saccountandclickingthe“Assign” buon.
5. WhenthesoftwarehasnishingassigningtheocertotheBC-1Body
CameradisconnecttheBC-1BodyCamerafromthecomputer.
If you connect the BC-1 Body Camera to a computer and do not
have the software running, it will only charge its battery and you
cannot access the camera’s internal les.
However, if you have the BC-1 Body Camera software running
while the BC-1 Body Camera is connected, you can also use
Windows Explorer to access it as a ash drive.
24 25
Brand Name: 10-8
Model Name: 10-8 BC-1
Specications: • Loop Recording
• Industrial grade for extreme conditions & reliability
• Can replace existing mic for most major brand walkies
• Drop/shock & water resistant
• Same size as most existing walkie mics
• IR with automatic switching in low/no light conditions
• 360° rotatable buckle
• Password protected les
• Includes 32GB memory
• Up to 6 hours continuous recording (48 hrs standby)
Camera Sensor: 5.0 mega pixels CMOS
Video Format: AVI
Video Resolution: 720x480 pixels, 30fps
Picture Format: JPEG
Picture Resolution: 12 mega pixels
Field of View: 120°
Text Overlay: Off / Date / Date & Time / Ofcer ID
Languages: English
Memory: 32GB
Battery: 1600mA, Rechargeable Lithium-ion Battery
Color: Black
Dimensions: 96 x 64 x 33 (mm)
Net Weight: 141g
Includes: • 1 - USB cable
• 1 - AC Adapter (110-240V)
• 1 - 12v Cigarette Adapter Charger
• 1 - User Manual
Optional Accessories: • Connector cable with intercom
Specications
System Messages
The10-8BC-1BodyCamerautilizesbothaudible(“beeps”)andvisual
(LEDlightsandLCDscreen)indicatorstoinformyouofthestatusand
healthofthedevice.Refertothechartsbelowformoreinformation.
LED Status Indicator Lights
LED Color LED Duration Explanation
Green On/Solid Power is on. System normal. In Recording Standby Mode.
Yellow On/Solid Recording audio in progress.
Red On/Solid Recording video in progress.
Red Blink/Flash In photograph mode indicates photo being taken.
Red On/Solid When charging indicated device is being charged. LED goes out
when fully charged.
Audio Indicators
“Beeps” Explanation
SIngle Beep Photo taken.
Four (4) beeps Memory card is full.
The LCD screen will also display “Memory Card Full”.
Five (5) beeps every three (3) minutes Battery low.
The camera will begin to shutdown within 20 minutes of this
warning.
If the BC-1 Body Camera has to stop recording due to a full
storage card or low battery, it will automatically stop recording,
save and close the le to ensure the integrity of the data.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13

10-8 Video Digital Evidence Solutions 10-8 Body Camera User manual

Brand
10-8 Video Digital Evidence Solutions
Model
10-8 Body Camera
Category
Drive recorders
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents