Brigade MDR-304A-500 (3880) User manual

Brigade
Brand
Brigade
Model
MDR-304A-500 (3880)
Type
User manual
WHEN USING THE DELAY RELAY FUNCTION OF THE MDR-304A ON A 24V VEHICLE THE RELAY MAY CUT OUT IF THE VOLTAGE SUPPLY ON THE MDR-304A BATTERY
WIRE (YELLOW WIRE) EXCEEDS 28VOLTS.
IF THE MDR-304A IS REQUIRED TO PROVIDE POST RECORD FUNCTION FOR THE BN360-000 SYSTEM A 24V 5 PIN RELAY CAN BE USED TO RESOLVE THIS ISSUE IF
CONNECTED AS SHOWN BELOW. PLEASE NOTE THIS SOLUTION WILL OVERRIDE THE "ON DELAY" FUNCTION.
FOR POST RECORD OPERATION THE SUPPLY TO THE DELAY RELAY MUST BE A BATTERY FEED.
PLEASE NOTE THIS ISSUE IS NOT APPLICABLE ON 12V APPLICATIONS.
24V IGNITION (FUSED)
GND
CONNECT TO BN360-000 ACC (RED WIRE)
CONNECTED TO MDR-304A TIMER RELAY
24V IGNITION (FUSED)
87
87a
85
86
30
PROPRIETARY NOTICE
THE EXPRESS WRITTEN CONSENT OF BRIGADE ELECTRONICS.
PROPRIETARY NOTICE
THE EXPRESS WRITTEN CONSENT OF BRIGADE ELECTRONICS.
THIS DESIGN AND TECHNICAL INFORMATION APPEARING ON THIS DRAWING IS THE PROPERTY OF BRIGADE ELECTRONICS, AND IS DISCLOSED
IN CONFIDENCE. IT IS NOT TO BE COPIED, REPRODUCED, REVEALED TO OR EXPROPRIATED BY OTHERS, EITHER IN WHOLE OR IN PART WITHOUT
www.brigade-electronics.com
THIS DESIGN AND TECHNICAL INFORMATION APPEARING ON THIS DRAWING IS THE PROPERTY OF BRIGADE ELECTRONICS, AND IS DISCLOSED
IN CONFIDENCE. IT IS NOT TO BE COPIED, REPRODUCED, REVEALED TO OR EXPROPRIATED BY OTHERS, EITHER IN WHOLE OR IN PART WITHOUT
R
www.brigade-electronics.com
GPS
Remote
Audio Out
Video Out
AUX1
AUX2
Camera In
1 2 3 4
Power Delay
30A MAX
ACC+12V
RS-232 IN1
IN2
IN3
IN4
OUT1
OUT2
I/O
G-SENSOR
12V 9V 6V
+24V
24V BATTERY (FUSED)
5 PIN RELAY
REAR OF MDR-304A
  • Page 1 1

Brigade MDR-304A-500 (3880) User manual

Brigade
Brand
Brigade
Model
MDR-304A-500 (3880)
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents