Eaton xComfort CPAD-00/213 Operating instructions

Eaton
Brand
Eaton
Model
xComfort CPAD-00/213
Type
Operating instructions

Eaton xComfort CPAD-00/213 is a Wireless Dim All device that can be used to dim lights, control blinds, and switch sockets. It is compatible with Eaton xComfort and can be controlled via the xComfort app or via voice control with Amazon Alexa or Google Assistant. The device has a standby power consumption of 325mW and a battery lifetime of 10 years. It has a degree of protection of IP20 and can be used in temperatures ranging from -5 to +55°C. The device is easy to install and can be mounted on a wall or ceiling. It comes with a CR2450N 3V battery.

Eaton xComfort CPAD-00/213 is a Wireless Dim All device that can be used to dim lights, control blinds, and switch sockets. It is compatible with Eaton xComfort and can be controlled via the xComfort app or via voice control with Amazon Alexa or Google Assistant. The device has a standby power consumption of 325mW and a battery lifetime of 10 years. It has a degree of protection of IP20 and can be used in temperatures ranging from -5 to +55°C. The device is easy to install and can be mounted on a wall or ceiling. It comes with a CR2450N 3V battery.

Technical Data / Technische gegevens / Tekniske data /
Technische Daten / Technická data
Power supply 230 VAC +10% -15%, 50Hz
Load
R,L,C: 0 - 250 W (0 - 250 VA); LED, ESL: 0 - 100 W (TYP)
M
Eaton Smart Dimming technology with overload protection
Auto trailing / leading edge mode
6 DIM Profi les
Standby 325mW (TYP)
Battery CR2450N 3V (included)
Battery lifetime 10 years (TYP)
RF 868,3MHz (xComfort compatible)
Degree of protection IP20
Actor -5 to +55°C
Sensor +5 to +45°C
Wireless Dim All
CPAD-00/213 - 193728
Content - Innhold - Inhoud - Inhalt - Obsah
Quick Installation Card
Hurtig installasjon kort - Snelle installatiekaart -
Schnellinstallationskarte - Karta pro rychlou instalaci
Quick_Insta_card_Wireless_Dim_All.indd
01.2018a / IL019193ZU / 136211191
136211191.indd 1136211191.indd 1 30.01.2018 12:00:5130.01.2018 12:00:51
136211191.indd 2136211191.indd 2 30.01.2018 12:01:0830.01.2018 12:01:08
2
www.eaton.com/WirelessSwitching
136211191.indd 3136211191.indd 3 30.01.2018 12:01:0830.01.2018 12:01:08
EU
- type examination performed by:
TÜV Austria Services GmbH, Notified Body
1230 Vienna, Deutschstrasse 10, Austr
ia
Affixing date of CE mark:
2015
Doc.Id.:
CDAU-01_04.._171117
Senior Vice President Director Quality
General Manager & Systems
Friedrich Schröder
Fernando Ceccarelli
Declaration of Conformity
We, EATON Industries (Austria) GmbH
3943 Schrems, Eugenia 1
Austria
declare under our sole responsibility that the product (family)
Eaton - Dimming actuator,
CDAU-01/04.. (contains RF-Modul CSCZ-01/xx)
(the declaration of conformity applies to all
listed types within our actual product catalogue)
provided that it is installed, maintained and used in the
application intended for, with respect to the relevant manufacturers
instructions, installation standards and “good engineering practices”
complies with the provisions of Council directive(s):
RED Directive 2014/53/EU
RoHS Directive 2011/65/EU
based on compliance with following standard(s):
EN 301489-3 V2.1.1, EN 300220-2 V3.1.1, EN 60669-2-1:2010,
EN 50428:2005 + A1:2007 + A2:2009, EN 55015:2013, EN 61547:2009,
EN 50491-5-1:2010, EN 50491-5-2:2010, EN 60950-1:2006 + A11:2009
+ A1:2010 + A12:2011 + A2:2013, EN 62479:2010, EN 50581:2012
17.11.2017
EU
- type examination performed by:
TÜV Austria Services GmbH, Notified Body
1230 Vienna, Deutschstrasse 10, Austria
Affixing date of CE mark:
2003
Doc.Id.:
CTAA-…_171117
Senior Vice President Director Quality
General Manager & Systems
Friedrich Schröder
Fernando Ceccarelli
Declaration of Conformity
We, EATON Industries (Austria) GmbH
3943 Schrems, Eugenia 1
Austria
declare under our sole responsibility that the product (family)
Eaton - Push Button,
CTAA-…
(the declaration of conformity applies to all
listed types within our actual product catalogue)
provided that it is installed, maintained and used in the
application intended for, with respect to the relevant manufacturers
instructions, installation standards and “good engineering practices”
complies with the provisions of Council directive(s):
RED Directive 2014/53/EU
RoHS Directive 2011/65/EU
based on compliance with following standard(s):
EN 301489-3 V2.1.1, EN 300220-2 V3.1.1, EN 50491-5-1:2010,
EN 50491-5-2:2010, EN 60950-1:2006 + A11:2009 + A1:2010 +
A12:2011 + A2:2013, EN 62479:2010, EN 50581:2012
17.11.2017
© 2018 by Eaton Industries (Austria) GmbH
Eugenia 1, 3943 Schrems, Austria
www.eaton.eu/documentation
All Rights Reserved, Printed in Austria
136211191.indd 4136211191.indd 4 30.01.2018 12:01:0830.01.2018 12:01:08
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Eaton xComfort CPAD-00/213 Operating instructions

Eaton
Brand
Eaton
Model
xComfort CPAD-00/213
Type
Operating instructions

Eaton xComfort CPAD-00/213 is a Wireless Dim All device that can be used to dim lights, control blinds, and switch sockets. It is compatible with Eaton xComfort and can be controlled via the xComfort app or via voice control with Amazon Alexa or Google Assistant. The device has a standby power consumption of 325mW and a battery lifetime of 10 years. It has a degree of protection of IP20 and can be used in temperatures ranging from -5 to +55°C. The device is easy to install and can be mounted on a wall or ceiling. It comes with a CR2450N 3V battery.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents