2. Eaton
  3. xComfort CPAD-00/212

Eaton xComfort CPAD-00/212 Operating instructions

  • Hello! I've analyzed the Quick Installation Card for Eaton Wireless Switch and other related products like CSAU series switching actuators and CTAA push button. It provides essential technical specifications, installation guidelines, and declaration of conformity. I'm ready to assist you with any questions you might have about these Eaton devices.
  • What is the power supply?
    What is the battery type?
    What is the RF frequency?
Content - Innhold - Inhoud - Inhalt - Obsah
Technical Data / Technische gegevens / Tekniske data /
Technische Daten / Technická data
Power supply 230 VAC +10% -15%, 50Hz
Load Load: R,L,C,LED: 10A
M
Eaton Patented Hybrid Zero-cross switching technology
Standby 230mW (TYP)
Battery CR2450N 3V (included)
Battery lifetime 10 years (TYP)
RF 868,3MHz (xComfort compatible)
Degree of protection IP20
Actor -5 to +55°C
Sensor +5 to +45°C
Quick_Insta_card_Wireless_Switch_All.indd
01.2018a / IL019192ZU / 136211190
Quick Installation Card
Wireless Switch All
CPAD-00/212 - 193727
Hurtig installasjon kort - Snelle installatiekaart -
Schnellinstallationskarte - Karta pro rychlou instalaci
136211190.indd 1136211190.indd 1 30.01.2018 11:54:2830.01.2018 11:54:28
136211190.indd 2136211190.indd 2 30.01.2018 11:54:3330.01.2018 11:54:33
2
www.eaton.com/WirelessSwitching
136211190.indd 3136211190.indd 3 30.01.2018 11:54:3330.01.2018 11:54:33
EU
- type examination performed by:
TÜV Austria Services GmbH, Notified Body
1230 Vienna, Deutschstrasse 10, Austria
Affixing date of CE mark:
2014
Doc.Id.:
CSAU-0101-10.._CSAU-0101-16.._171117
Senior Vice President Director Quality
General Manager & Systems
Friedrich Schröder
Fernando Ceccarelli
Declaration of Conformity
We, EATON Industries (Austria) GmbH
3943 Schrems, Eugenia 1
Austria
declare under our sole responsibility that the product (family)
Eaton - Switching actuator,
CSAU-01/01-10.., CSAU-01/01-16.. (contains RF-Modul
CSCZ-01/xx)
(the declaration of conformity applies to all
listed types within our actual product catalogue)
provided that it is installed, maintained and used in the
application intended for, with respect to the relevant manufacturers
instructions, installation standards and “good engineering practices”
complies with the provisions of Council directive(s):
RED Directive 2014/53/EU
RoHS Directive 2011/65/EU
based on compliance with following standard(s):
EN 301489-3 V2.1.1, EN 300220-2 V3.1.1, EN 60669-2-1:2010;
EN 50428:2005 + A1:2007 + A2:2009, EN 50491-5-1:2010,
EN 50491-5-2:2010, EN 60950-1:2006 + A11:2009 + A1:2010 +
A12:2011 + A2:2013, EN 62479:2010, EN 50581:2012
17.11.2017
EU
- type examination performed by:
TÜV Austria Services GmbH, Notified Body
1230 Vienna, Deutschstrasse 10, Austria
Affixing date of CE mark:
2003
Doc.Id.:
CTAA-…_171117
Senior Vice President Director Quality
General Manager & Systems
Friedrich Schröder
Fernando Ceccarelli
Declaration of Conformity
We, EATON Industries (Austria) GmbH
3943 Schrems, Eugenia 1
Austria
declare under our sole responsibility that the product (family)
Eaton - Push Button,
CTAA-…
(the declaration of conformity applies to all
listed types within our actual product catalogue)
provided that it is installed, maintained and used in the
application intended for, with respect to the relevant manufacturers
instructions, installation standards and “good engineering practices”
complies with the provisions of Council directive(s):
RED Directive 2014/53/EU
RoHS Directive 2011/65/EU
based on compliance with following standard(s):
EN 301489-3 V2.1.1, EN 300220-2 V3.1.1, EN 50491-5-1:2010,
EN 50491-5-2:2010, EN 60950-1:2006 + A11:2009 + A1:2010 +
A12:2011 + A2:2013, EN 62479:2010, EN 50581:2012
17.11.2017
© 2018 by Eaton Industries (Austria) GmbH
Eugenia 1, 3943 Schrems, Austria
www.eaton.eu/documentation
All Rights Reserved, Printed in Austria
136211190.indd 4136211190.indd 4 30.01.2018 11:54:3330.01.2018 11:54:33
/