Eaton xComfort CDAP-01/0X Operating instructions

Eaton
Brand
Eaton
Model
xComfort CDAP-01/0X
Type
Operating instructions

Eaton xComfort CDAP-01/0X is a device that allows for remote control and monitoring of various electrical devices in your home or office. With its help, you can control lighting, heating, and other appliances remotely, as well as monitor their status. The device is easy to install and use, and it comes with a number of features that make it a valuable addition to any smart home or office.

Some of the key features of the Eaton xComfort CDAP-01/0X include:

  • Remote control: You can control your devices from anywhere in the world using the Eaton xComfort app on your smartphone or tablet. This gives you the ability to turn lights on or off, adjust the thermostat, or lock the doors, even when you're not at home.

Eaton xComfort CDAP-01/0X is a device that allows for remote control and monitoring of various electrical devices in your home or office. With its help, you can control lighting, heating, and other appliances remotely, as well as monitor their status. The device is easy to install and use, and it comes with a number of features that make it a valuable addition to any smart home or office.

Some of the key features of the Eaton xComfort CDAP-01/0X include:

  • Remote control: You can control your devices from anywhere in the world using the Eaton xComfort app on your smartphone or tablet. This gives you the ability to turn lights on or off, adjust the thermostat, or lock the doors, even when you're not at home.
MA-cdap-01-0X.qxd/02.2018L
IL019029ZU / 136211067
Eaton Industries (Austria) GmbH, Eugenia 1, 3943 Schrems, Austria
www.eaton.eu/documentation
EU
xComfort CDAP-01/XX
Assembly instructions
Montageanweisung
Instructions de montage
Montážní návod
Montážní návod
Montagevejledning
Instrucciones de montaje
Szerelési utasitás
Istruzioni di montaggio
Montasjeveiledning
Montage instructie
Instruções de montagem
Instrukcja montazu
Montageanvisning
Asennusohjeet
Montaj talimati
Instructiuni de montaj
Danger
Lebensgefahr
Danger de mort
Nebezpe íč
Nebezpe enstvoč
Fare
Peligro
Életveszély
Pericolo di morte
Fare
Levensgevaar
Perigo
Niebezpieczenstwo
Varning
Vaara
Hayati Tehlike
Pericol
Installation by electricians only
Montage nur durch Elektrofachkräfte
Montage uniquement par un électricien
Montáž pouze osobami s elektrotechnickou kvalifikaci
Montáž iba osobami s elektrotechnickou kvalifikáciou
M kun installeres af en aut. el-installatørå
Debe ser instalado por un profesional eléctrico
Csak szakképzett személy szerelheti
Montaggio esclusivamente ad opera di personale specializzato
M monteres av autorisert installatørå
Montage alleen door elektromonteurs
Deve ser instalado por um profissional
Montaz tylko przez uprawnionych instalatorów
F r endast utföras av behörig elektrikerå
Asennus vain sähköasentajan toimesta
Sadece uzman kisiler monte edebilir
Instalare numai de catre electricieni
1
868,3 MHz
~ 60-90% ~ 80-95% ~ 20-60% ~ 0-10% ~ 70-90%
T=-5°C - +45°C
T=-25°C - +70 °C IP20
max. 15
F
R
MRF
Min. Version 3.5
Min. Version 1.40
2
CDAP-01/13; CDAP-01/16 250W/230VAC CDAP-01/14 250W/230VAC
CDAP-01/12 250W/230VAC CDAP-01/11 250W/230VAC
PLSM-C16/1N
3
EU
- type examination performed by:
TÜV Austria Services GmbH, Notified Body
1230 Vienna, Deutschstrasse 10, Austria
Affixing date of CE mark:
2005
Doc.Id.:
CDAP-…_171117
Senior Vice President Director Quality
General Manager & Systems
Friedrich Schröder
Fernando Ceccarelli
Declaration of Conformity
We, EATON Industries (Austria) GmbH
3943 Schrems, Eugenia 1
Austria
declare under our sole responsibility that the product (family)
Eaton - Plug in adapter - dimming,
CDAP-…
(the declaration of conformity applies to all
listed types within our actual product catalogue)
provided that it is installed, maintained and used in the
application intended for, with respect to the relevant manufacturers
instructions, installation standards and “good engineering practices”
complies with the provisions of Council directive(s):
RED Directive 2014/53/EU
RoHS Directive 2011/65/EU
based on compliance with following standard(s):
EN 301489-3 V2.1.1, EN 300220-2 V3.1.1, EN 50491-5-1:2010,
EN 50491-5-2:2010, EN 62479:2010, EN 50428:2005 + A1:2007 +
A2:2009, EN 55015:2013, EN 61547:2009, IEC 60884-2-5:1995,
EN 50581:2012
17.11.2017
CSAU-01/01
CJAU-01/01
CDAU-01/01
CTAA-01/01
CTAA-02/01
CRCA-00/01
CHSZ-00/01
CBEU-02/01
CBEU-02/02
RF- SYSTEM
BASIC-MODE - CARD
4
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Eaton xComfort CDAP-01/0X Operating instructions

Eaton
Brand
Eaton
Model
xComfort CDAP-01/0X
Type
Operating instructions

Eaton xComfort CDAP-01/0X is a device that allows for remote control and monitoring of various electrical devices in your home or office. With its help, you can control lighting, heating, and other appliances remotely, as well as monitor their status. The device is easy to install and use, and it comes with a number of features that make it a valuable addition to any smart home or office.

Some of the key features of the Eaton xComfort CDAP-01/0X include:

  • Remote control: You can control your devices from anywhere in the world using the Eaton xComfort app on your smartphone or tablet. This gives you the ability to turn lights on or off, adjust the thermostat, or lock the doors, even when you're not at home.
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents