2. Astria Fireplaces
  3. BRT20-25

Astria Fireplaces BRT20-25, BRT40, Mission Instruction Sheet

  • Hello! I've reviewed the document regarding the FD Series Fixed-Pane Glass Door Kits, including models FD32, FD32B, FD32P, FD36, FD36B, FD36P, FD42, FD42B, and FD42P. This document contains the installation instructions, which involve securing the door with spring clips and pivot plates. I understand these doors come in black, brushed brass, and platinum. I am ready to assist you with any questions you have about installing your new glass door.
  • What finishes are available for the fixed-pane glass doors?
    What should I do before starting the installation?
    What tools are required for installation?
    What should I do if parts are missing or damaged?
Figure 1 - Fixed-Pane Glass Door Installation
FD SERIES FIXED-PANE GLASS DOOR KITS
[FOR USE WITH MODELS BRT2032, BRT2332, BRT2532, BRT4036/42, BRT4336/42, BRT4536/42, MISSION36/42]
FD SERIES FIXED-PANE GLASS DOOR KITS
P/N 127142-01
Rev. B, 03/2017
HEARTH PRODUCTS
KITS AND ACCESSORIES
1
IHP.us.com
KIT CONTENTS
1 ea. Door Assembly
1 ea. Instruction Sheet
Cat. No. Model Description
F0993 FD32
32" Fixed Door, Black
F0994 FD32B
32" Fixed Door, Brushed Brass
F0995 FD32P
32" Fixed Door, Platinum
F0996 FD36
36" Fixed Glass Door, Black
F0997 FD36B
36" Fixed Glass Door, Brushed Brass
F0998 FD36P
36" Fixed Glass Door, Platinum
F0999 FD42
42" Fixed Glass Door, Black
F1000 FD42B
42" Fixed Glass Door, Brushed Brass
F1001 FD42P
42" Fixed Glass Door, Platinum
WARNING
USE GLASS DOORS CERTIFIED FOR USE WITH YOUR
APPLIANCE OR FIREPLACE ONLY
REQUIRED TOOLS AND SUPPLIES
Phillip Screwdriver
GENERAL INFORMATION
Fixed-pane glass doors are available in black, brushed brass and
platinum fi nishes.
READ ALL THE STEPS BEFORE STARTING THE INSTALLATION
THE FIREPLACE MUST BE OFF AND COLD BEFORE BEGINNING.
ALL WARNINGS, PRECAUTIONS AND INSTRUCTIONS IN THE
INSTALLATION AND OPERATION MANUAL PROVIDED WITH THE
APPLIANCE APPLY TO THESE INSTRUCTIONS.
If you encounter any problems, need clarifi cation of these instructions
or are not qualifi ed to properly install this kit, contact you local
distributor or dealer.
If any of these parts are missing or damaged, contact your dealer or
IHP.us.com for referral information.
INSTALLATION
Insert top door pins fi rst into door rail located on the top face. Make
sure pins are properly secured to spring clips provided with your
unit. As you hold top portion in place, swing bottom of door towards
bottom face until door pins are aligned to pivot plates. NOTE: Some
adjustment maybe required in order to align door pins to clip (top)
and pivot plate (bottom).
This can be done by loosening the screw securing both spring clip
and pivot plate and sliding it to the proper location.
Spring Clip
Pivot Plate
Pivot Plate
Spring Clip
2
Printed in U.S.A. © 2014 Innovative Hearth Products
P/N 127142-01 Rev. B 03/2017
IHP reserves the right to make changes at any time, without notice, in design, materials, specifi ca-
tions, prices and also to discontinue colors, styles and products. Consult your local distributor
for fi replace code information.
1508 Elm Hill Pike, Suite 108 • Nashville, TN 37210
IHP.us.com
/