EZ-BT
TM
MODULE PROGRAMMING KIT
CYBT-343026-PROG
The EZ-BT
TM
Module Programming Kit (CYBT-343026-PROG)
enables you to easily program the following EZ-BT
TM
WICED
modules prior to manufacturing: CYBT-343026-01 and
CYBT-343151-02.
The life time of the socket used in this programming kit is
50,000 insertions.
For more information, visit:
www.cypress.com/products/ez-ble-and-ez-bt-bluetooth-modules - EZ-BT Module home pages
http://www.cypress.com/WICEDModuleProgrammerUserGuide -
WICED Module Programmer User Guide – KBA225060
www.cypress.com/EZ-Serial - EZ-Serial Firmware Platform page
www.cypress.com/WICED - WICED SDK page
Figure 1: CYBT-343026-PROG Top View
P5LP PROG Header
USB Connector
BT Module
© 2019 Cypress Semiconductor Corporation. All rights
reserved. All trademarks or registered trademarks referenced herein
are the properties of their respective owners. 002-26067 Rev.**
EZ-BT
TM
MODULE PROGRAMMING KIT
CYBT-343026-PROG
Visit www.cypress.com/support for technical support.
To use the CYBT-343026-PROG:
1) Put the BLE module in the socket (ensure that the BLE module is in the correct position
of the socket, as shown below)
2) Connect the programming device with a USB cable to a computer that has been installed
with WICED Module Programmer (www.cypress.com/WICEDModuleProgrammer)
3) Run the programming software to program the targeted BLE module with your
selected rmware.
Figure 2: Module in the socket
-
1
-
2
Infineon CYBT-343026-PROG User manual
- Type
- User manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Cypress Semiconductor CY8CKIT-062-WiFi-BT User manual
-
-
-
-
-
-
-
-
-
Murata SN8000 EVK User manual