ATX Confi dential & Proprietary
INSTALLATION MANUAL
MN5T Front Mount Chassis with Cable Management Tray
www.atxnetworks.com
www.atx.com
®
Pat. #s U.S. 6,842,348; 7,043,236;
Cdn. 2,404,840; 2,404,844
®
Pat. #s U.S. 6,842,348; 7,043,236;
Cdn. 2,404,840; 2,404,844
D3.1/CCAP
™
Compliant
ATX Condential & Proprietary
SignalOn
®
Series, MAXNET
®
, HFC Enhance
®
, PCI Filters
®
, Q-Series
®
& FiberLinx
®
are registered trademarks of ATX in the United States and/or other countries. SMAC
SM
is a
service mark of ATX in the United States and/or other countries. Products or features contained herein may be covered by one or more U.S. or foreign patents. Other non-ATX
product and company names in this manual are the property of their respective companies.
Although every effort has been taken to ensure the accuracy of this document it may be necessary, without notice, to make amendments or correct omissions.
Specications subject to change without notice.
ATX Condential & Proprietary
TABLE OF CONTENTS
Page
1. INSTALLATION INSTRUCTIONS ............................................................................................................. 1-1
1.1. Contents ............................................................................................................................................ 1-1
1.2. Step 1 ............................................................................................................................................... 1-1
1.3. Step 2 ............................................................................................................................................... 1-1
1.4. Step 3 ................................................................................................................................................ 1-2
2. SERVICE & SUPPORT ..............................................................................................................................2-1
2.1. Contact ATX Networks ....................................................................................................................... 2-1
2.2. Warranty Information ......................................................................................................................... 2-1
MAXNET
®
– MN5T Front Mount Chassis with Cable Management Tray – Installation Manual i
ATX Confi dential & Proprietary
ii MAXNET
®
– MN5T Front Mount Chassis with Cable Management Tray – Installation Manual
This page left intentionally blank.
ATX Condential & Proprietary
INSTALLATION INSTRUCTIONS
1. Installation Instructions
1.1 Contents
1 - MAXNET 5RU Chassis with Cable Management Tray
4 - 6 - 32 x 3/8 Phillips Screws
40 - Cable Tie Buttons
1.2 Step 1
When shipped, Cable Management Tray is rotated up as shown.
1.3 Step 2
Cut cable ties used for shipping and rotate Cable Management Tray until horizontal and fasten in place with 6 - 32 x 3/8
screws, one per side.
MAXNET
®
– MN5T Front Mount Chassis with Cable Management Tray – Installation Manual 1-1
CHAPTER 1: INSTALLATION INSTRUCTIONS
ATX Condential & Proprietary
1.4 Step 3
Insert cable tie buttons into holes on Cable Management Tray in desired locations.
Loop cable ties through buttons to secure cables to tray.
CHAPTER 1: CINSTALLATION INSTRUCTIONS
1-2 MAXNET
®
– MN5T Front Mount Chassis with Cable Management Tray – Installation Manual
ATX Condential & Proprietary
SERVICE & SUPPORT
2. Service & Support
2.1 Contact ATX Networks
Please contact ATX Technical Support for assistance with any ATX products. Please contact ATX to obtain a valid RMA
number for any ATX products that require service and are in or out-of-warranty before returning a failed module to ATX.
TECHNICAL SUPPORT
Tel: 289.204.7800 – press 1
Toll-Free: 866.YOUR.ATX (866.968.7289) USA & Canada only
Email: [email protected]
SALES ASSISTANCE
Tel: 289.204.7800 – press 2
Toll-Free: 866.YOUR.ATX (866.968.7289) USA & Canada only
Email: [email protected]
FOR HELP WITH AN EXISTING ORDER
Tel: 289.204.7800 – press 3
Toll-Free: 866.YOUR.ATX (866.968.7289) USA & Canada only
Email: [email protected]
Web: www.atx.com
2.2 Warranty Information
All of ATX Networks’ products have a 1-year warranty that covers manufacturer’s defects or failures.
CHAPTER 2: SERVICE & SUPPORT
MAXNET
®
– MN5T Front Mount Chassis with Cable Management Tray – Installation Manual 2-1
ATX Confi dential & Proprietary
ISO
9001:15
REGISTERED
www.atx.com
Rev. 12/19 (ANW0716)
ATX Networks
Tel: 289.204.7800 | Toll-Free: 866.YOUR.ATX (866.968.7289) | [email protected]
© 2019 by ATX Networks Corp. and its affiliates (collectively “ATX Networks Corp.”).
All rights reserved. This material may not be published, broadcast, rewritten, or
redistributed. Information in this document is subject to change without notice.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
ATX MAXNET Cable Management Tray MN5T Installation guide
- Type
- Installation guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
ADC RF Signal Management SignalOn Series User manual
-
IMC Networks FiberLinX User manual
-
Maxent ML-3731HLT Owner's manual
-
Cabletron Systems 3T02-04 User manual
-
Rosewill RCW-H9011 Datasheet
-
Intel CORE 2 DUO E8000 - UPDATE 7-2010 User manual
-
Antec P280 User manual
-
Acer ARMC_3P User manual
-
Rosewill RMI-SB25I Datasheet
-
