Motorola ORBIT User manual

USER’S GUIDE

Wireless Wi-Fi

®

Video Camera

Model: ORBIT

The features described in this user’s guide are subject to modifications without prior notice.

This User’s Guide has all the information you need to make the most out of your

product.

Please read the Safety Instructions on page 5 before you install the unit.

Inside the Box

• Orbit Camera Unit (with micro-SD card)

• Magnetic Mounting Plate

• USB Charging Dock

Welcome...

to your new Motorola Wireless Wi-Fi

®

Video Camera!

Thank you for purchasing your new Motorola Wireless Wi-Fi

®

Video Camera.

If you have always wondered what happens when you are away, wonder no

more. The ORBIT Camera features an intelligent system that differentiates

human from other objects and send reliable notification to users. Now you can

monitor your children, pets or property with this easy to use system. You can

install the Camera only from your iPhone

®

/iPad

®

or Android™ devices and

view the Camera from your iPhone

®

/iPad

®

or Android™ devices.

Please keep your original dated sales receipt for your records. For warranty

service of your Motorola product, you will need to provide a copy of your dated

sales receipt to confirm warranty status. Registration is not required for warranty

coverage.

For product related questions, please call:

US and Canada 1-888-331-3383

On the Web: www.motorolastore.com/support

Email: [email protected]

1. Light Sensor (for night mode

detection)

2. Microphone

3. Green LED Indication

4. Passive Infrared Sensor (PIR)

5. Speaker

6. Red LED Indication

7. Camera Lens

8. Reset

9. On / Off Button

10. PAIR Button

11. Locating Hole for Outdoor

Mounting / Stand / USB Charging

Dock

12. Mounting thread for Outdoor

Mounting / Stand / USB Charging

Dock

13. Charging Pins for USB Charging

Dock

14. Rubber flap covering micro-USB

socket (DC 5V/2A) and micro-SD

card holder (up to 32GB)

Overview of your Camera

1

2

4

5

8

9

10

12

7

3

11

6

13

14

RESET

ON/OFF

PAIR

Important guidelines for installing your Wireless Wi-Fi

®

Camera Unit

• STRANGULATION HAZARD – In case this unit is being used to monitor infants

or children, keep the unit and USB cable more than 3 feet away from the crib

and out of their reach. Never place camera or USB cable within a crib or near a

bed. Secure the USB cable away from children’s reach.

• Use of other 2.4 GHz products, such as other wireless networks, Bluetooth

®

systems or microwave ovens may cause interference with this product. Keep

the Wi-Fi

®

Camera Unit away from these types of products, or turn them off if

they appear to be causing interference.

• Always ensure that you have a good Wi-Fi

®

connection available.

• Please ensure that the Orbit Camera is mounted in areas that are not exposed

to unfavorable environmental conditions including, but not limited to,

excessive vibration, humidity and wind.

4 Table of contents

Table of contents

1. Safety Instructions ....................................................................................... 5

2. Getting Started ............................................................................................ 6

2.1 Charging the Camera ........................................................................... 6

2.1.1 Using USB Charging Dock (included).................................... 6

2.1.2 Using micro-USB cable (not included) ................................... 7

2.2 Powering the Camera ........................................................................... 8

2.3 Pairing the Camera ............................................................................... 8

2.4 Resetting the Camera............................................................................ 9

2.5 LED status indicators ............................................................................. 9

2.6 Mounting the Camera ......................................................................... 10

3. System Requirements ............................................................................... 11

4. Connecting Devices ................................................................................. 12

4.1 User Account and Camera Setup on Android™ Devices ................. 13

4.1.1 Download the Hubble Home App ....................................... 13

4.1.2 Run Hubble Home App on Android™ device .................... 13

4.1.3 Add the Camera to your account ........................................ 14

4.1.4 Add more Cameras to your account.................................... 17

4.2 User Account and Camera Setup on iPhone

®

/iPad

®

........................ 18

4.2.1 Download the Hubble Home App........................................ 18

4.2.2 Run Hubble Home App on iPhone

®

/ iPad

®

....................... 18

4.2.3 Add the Camera to your account......................................... 19

5. Help ............................................................................................................ 26

6. General Information .................................................................................. 32

7. Technical Specifications ........................................................................... 38

Safety Instructions 5

ENGLISH

1. Safety Instructions

WARNING

This Wi-Fi

®

Camera Unit is compliant with all relevant electromagnetic field

standards and is, when handled as described in the User’s Guide, safe to use.

Therefore, always read the instructions in this User’s Guide carefully before

using the device.

• STRANGULATION HAZARD – In case this unit is being used to monitor

infants or children, keep the unit and USB cable more than 3 feet away from

the crib and out of their reach.

• Never place the Camera Unit or USB cable within a crib or near a bed.

• Adult assembly is required due to small parts. Keep all small parts away from

children.

• This product is not a toy. Do not allow children to play with it.

• This Camera Unit is not a substitute for responsible adult supervision.

• Keep this User’s Guide for future reference.

• Do not place the Camera Unit within reach of the baby (the unit should be at

least 3 feet away).

• Do not cover the Camera Unit with a towel or blanket.

• Test the Camera Unit and all its functions so that you are familiar with it prior

to use.

• Do not use the Camera Unit near water.

• Do not install the Camera Unit near a heat source.

• Avoid exposing the Camera Unit to direct sunlight.

• Do not touch the plug contacts with sharp or metal objects.

• Installation of a camera can be restricted by local regulations or laws. Follow

the local regulations when using cameras.

6 Getting Started

2. Getting Started

2.1 Charging the Camera

The Camera comes with a built-in rechargeable battery.

Charge the battery fully before using it for the first time. It takes about 5 hours to

charge the battery fully.

For safety reasons, if the internal temperature of the Camera reaches 60⁰C, the

Camera will turn off automatically and the battery will stop charging. The

Camera will resume working and the battery will start charging again if the

temperature goes below 57⁰C and 52⁰C respectively.

The battery life is up to 3 months in POWER SAVING mode.

There are 2 charging options. You can either charge using the USB Charging

Dock (included) or a standard micro-USB cable (not included).

2.1.1 Using USB Charging Dock (included)

1. Align and tighten the screw.

2. Connect the USB cable to a standard USB power adapter (DC 5V / 2A, not

included) and plug it into a power outlet.

screw

Getting Started 7

ENGLISH

2.1.2 Using micro-USB cable (not included)

1. Remove back cover.

2. Open waterproof rubber flap.

3. Connect a micro-USB cable to the Camera,

then connect the USB cable to a standard USB

power adapter (DC 5V / 2A, not included) and

plug it into a power outlet.

8 Getting Started

2.2 Powering the Camera

• Remove the back cover.

• Press the on/off button for 5s until the RIGHT RED LED flashes rapidly to

power on.

• Press the on/off button for 5s until the GREEN and RED LEDs both turn off to

power off.

2.3 Pairing the Camera

• Remove the back cover.

• Press the PAIR button for a few seconds until the LEFT GREEN LED and

RIGHT RED LED flash alternately, and you hear a voice prompt indicating

that the unit is ready for pairing.

• For details on how to pair the Camera with your compatible Android device,

please refer to section 4.1 User Account and Camera Setup on Android™

Devices.

ON/OFF

Red LED

Green LED

PAIR

Red LED

Green LED

Getting Started 9

ENGLISH

• For details on how to pair the Camera with your compatible iOS device,

please refer to section 4.2 User Account and Camera Setup on iPhone

®

/

iPad

®

.

2.4 Resetting the Camera

• Remove the back cover.

• Press the RESET button on the Camera.

2.5 LED status indicators

Unconnected • Red LED flashes rapidly.

Pairing the device • Red and Green LEDs flash alternately.

Connected to the router • Red LED flashes slowly.

Connected to the server • Green LED lights up.

Streaming video • Green LED flashes slowly.

Power off • Both LEDs turn off when it is powered off.

RESET

Red LED

Green LED

10 Getting Started

2.6 Mounting the Camera

You can place the Camera indoor on a shelf, countertop or table, or mount it on

the wall using the included magnetic mounting plate. There is a keyhole slot

opening on the back of the magnetic mounting plate where a screw (12mm) fits

to keep the mounting plate in place on the wall.

Warning!

Please ensure that the magnetic mounting plate is mounted on a secure and

stable wall.

Please ensure that the Orbit Camera is mounted in areas that are not exposed

to unfavorable environmental conditions including, but not limited to, excessive

vibration, humidity and wind.

Keyhole slot on the back of

the mounting plate

Mounting

plate

Best mounting position

• Mark your mounting point with

a pencil.

• Fix a suitable 12mm mounting

screw (the screw head must fit

into the keyhole slot on the back

of the mounting plate) into the

mounting point.

• Fit the magnetic mounting plate

over the screw head in the

keyhole slot, and keep adjusting

the screw depth until the

mounting plate fits firmly.

• Ensure that the back cover is

attached to the Camera, and

then stick the Camera to the

magnetic mounting plate.

(Note: extreme angles or

orientation may be limited

with magnetic mount.)

• Check your Camera’s view by

looking at its live stream in

“Hubble Home”, a n d a d j u s t th e

position if you need to.

Back cover

Press here to

unlock and remove

the back cover.

System Requirements 11

ENGLISH

3. System Requirements

Please take note of the following minimum system requirements:

Smartphones/Tablets: iOS 7, Android™ 4.4

Wi-Fi

®

requirements:

Preferably 1MByte upload bandwidth per camera. Test your Internet speed at:

http://www.speedtest.net/

12 Connecting Devices

4. Connecting Devices

How does it work?

When a user tries to access the Camera, our Hubble server authenticates the

user’s identity before permitting access to the Camera.

Install Motorola “Hubble Home” Application.

View on Compatible Smartphones and Tablets.

1. Run the “Hubble Home” App on your compatible smartphone or tablet.

2. Follow the in-app instructions to create your Hubble account.

3. Log in to your account on your compatible smartphone or tablet.

4. Follow the in-app instructions to power up your Camera and pair it with

your compatible smartphone or tablet.

Access your

Camera locally

View your

Camera from any

compatible

device remotely

ORBIT

Wi-Fi Router

Hubble Service

Download the Motorola “Hubble Home”

App from the App Store for iOS devices

or from the Google Play

TM

Store for

Android

TM

devices.

Connecting Devices 13

ENGLISH

Android™

4.1 User Account and Camera Setup on Android™ Devices

What you need

• ORBIT Camera (fully charged)

• Smartphones/Tablets: iAndroid™ 4.4 or above

• Wi-Fi

®

requirement - preferably 1MByte upload bandwidth per camera.

4.1.1 Download the Hubble Home App

• Go to Google Play™ Store to search for "Hubble Home".

• Download "Hubble Home" App from Google Play™ Store and install it on

your Android™ device

4.1.2 Run Hubble Home App on Android™ device

• Ensure that your Android™ device is connected to your Wi-Fi

®

router.

• Run Hubble Home App, enter your account information and read through

the Terms of Service.

• Click the checkbox with the text "By signing up you agree to our Terms &

conditions" and tap

SIGN UP. (Picture A1)

Note

If you already have a Hubble App account, please select Already have an

Account? to go to the next step.

A1

14 Connecting Devices

4.1.3 Add the Camera to your account

• Tap to add camera. (Picture A2)

• The following setup instructions will appear on the screen. (Picture A3)

A2

A3

Connecting Devices 15

ENGLISH

Android™

• Follow the setup instructions and tap

CONTINUE

when the Camera’s LED

starts to blink.

• Press the PAIR button for a few seconds until the LEFT GREEN LED and

RIGHT RED LED flash alternately, and you hear a voice prompt indicating

that the unit is ready for pairing.

• Tap DETECT CAMERA.

• The App will automatically search for your Camera as shown in the pictures

below. The Camera’s LED will flash in green and red rapidly.

• Tap the detected camera, Camera (Orbit-xxxxxxxxx).

A4

A5

A6

A7

16 Connecting Devices

• Tap NEXT.

• Select your Wi-Fi

®

Network, enter your router password and then tap

CONNECT

.

• It will take a few minutes for the Camera to connect to the Wi-Fi

®

network

before showing the connection status.

• If connection fails, please tap

SEARCH AGAIN

and repeat the steps starting

from 4.1.3.

• Tap

GET STARTED

to skim through the main features of the Camera.

A8

A9

A10

Connecting Devices 17

ENGLISH

Android™

4.1.4 Add more Cameras to your account

• In Camera view, tap on the Hubble logo to go back to Add Camera page.

• Tap and repeat the steps starting from 4.1.3.

18 Connecting Devices

4.2 User Account and Camera Setup on iPhone

®

/iPad

®

What you need

• ORBIT Camera Unit (fully charged)

• Smartphones/Tablets: iOS 7 or later

• Wi-Fi

®

requirement - preferably 1MByte upload bandwidth per camera.

4.2.1 Download the Hubble Home App

• Go to the App Store to search for "Hubble Home".

• Download "Hubble Home" App and install it on your iPhone

®

/ iPad

®

4.2.2 Run Hubble Home App on iPhone

®

/ iPad

®

• Ensure that your iPhone

®

/ iPad

®

is connected to your Wi-Fi

®

router.

• Run Hubble Home App, enter your account information and read through

the Terms of Service.

• Click the checkbox with the text "By signing up you agree to our Terms &

conditions" and tap

SIGN UP. (Picture i1)

Note

If you already have a Hubble App account, please select Already have an

Account? to go to the next step.

i1

Connecting Devices 19

ENGLISH

iOS

4.2.3 Add the Camera to your account

• Tap and select Orbit Cameras (Pictures i2 and i3).

• If Bluetooth

®

is not enabled on your iOS device, swipe up to enable

Bluetooth

®

. (Picture i4)

i2

i3

i4

20 Connecting Devices

• The following setup instructions will appear on the screen. (Picture i5)

• Follow the setup instructions and tap Next when the Camera’s green and red

LEDs flash alternately.

• It will take a minute or so for your iOS device to detect the Camera. (Picture

i6)

i5

i6

Motorola ORBIT User manual

Related papers

Other documents