Defender IP2KCB1 User guide

GETTING STARTED

1. Connect the antenna to the camera.

2. Power on the camera by connecting the camera cable to the adaptor

3. Optional:Ifthereisnowiconnectivityinthearea,pleaseconnectthecameranetworkcabletotherouter

MOBILE AND CAMERA SET UP

1. Download the free Defender Smart Signal App

on the Android Play store or Apple store.

READY TO GO

Yourcamerashouldnowbereadyandyoushouldsee

thebelowviewwhenyouselectthecamera.

Youcannowmountyourcamerainthedesiredlocation.

2. Followthestepsoutlinedintheapptocreate

youraccount.Duringsetupifthekeyboardonyour

mobiledevicestaysonthescreenyouwillneedto

minimizeittoaccessthebuttonsonthescreen.

3. Onceyouraccountisactivated,entertheapp.

SelecttheDevicesoption.Taptheplussign(+)

toaddadevice.

4. ScantheQRcodeonyourcameraandfollowthein-

structionsontheapp.Select“Single Camera Setup”.

Tap (Apple) or (Android)toClosethekeyboard.

*Optional: Router

Camera Reset

Button

SD Card

Input

1 2

3 4

1. Camera information

2. Motiondetecton(yellow)/o

3. Deviceselection

4. Alertsonmovementdetected

5. Accountinformationandsetting

1 2

3 4 5

IP Camera Quick Start Guide

IP2KCB1