INSTALLATION INSTRUCTIONS FOR PART 99-7414
APPLICATIONS
METRA. The World’s best kits.
™
metraonline.com1-800-221-0932
© COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION
REV. 8/21/2013 INST99-7414
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
Table of Contents
Dash Disassembly
– Nissan Sentra 2000-2006 .................................... 2
Kit Assembly
– ISO mount radio provision .................................... 3
• ISO mount radio provision
• 99-7414B = Black
• 99-7414G = Gray
• 99-7414T = Tan
• A) Radio housing
KIT FEATURES
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 70- 7550 - Nissan harness powr/4 speaker 1995-up
• 70- 7551 - Nissan amplifier integration harness 1995-up
Antenna Adapter: • Not required
• Panel removal tool • Phillips screwdriver • Small flat blade screwdriver
TOOLS REQUIRED
A
Nissan Sentra 2000-2006
99-7414B, 99-7414G, 99-7414T
Dash Disassembly 99-7414
2
1. Open the storage compartment
above the radio and pull out on the
lip of the compartment to remove
compartment/AC vent assembly.
(Figure A)
2. Unclip and remove center dash
trim panel around pocket below
climate controls. (Figure B)
3. Remove (4) screws securing the
radio/pocket assembly, unplug and
remove the assembly. (Figure C)
Continued on next page
Nissan Sentra 2000-2006
4. Remove (2) screws securing the
climate control trim panel to the
factory brackets (Figure D) and
(4) screws securing the radio to
the factory brackets (Figure E).
Remove the radio and climate
control trim panel together.
(Figure E)
Attention: Retain the factory
brackets and pocket to be reused
during kit assembly.
5. Unsnap and remove the climate
control trim panel from the radio.
Note: Retain the climate control
trim panel to be reused during kit
assembly. (Figure F)
Continue to kit assembly
101.1
1
2
3
4
101.1
1
2
3
4
(Figure B)
(Figure C)
101.1
1
2
3
4
(Figure A)
101.1
101.1
(Figure E)
(Figure F)
101.1
1
2
3
4
(Figure D)
Kit Assembly 99-7414
3
1. Slide the aftermarket radio
between the factory brackets
and attach the radio to
the brackets using screws
supplied with the radio.
(Figure A)
2. Snap the climate control
trim panel and radio housing
together. (Figure B)
3. Place the trim panel/housing
assembly on the front of radio
bracket assembly and attach
the two assemblies together
using the screws removed
during disassembly.
(Figure C)
3. Locate the factory wiring
harness and antenna plug in
the dash. Metra recommends
using the proper mating
adapters from Metra and/or
AXXESS.
4. Reassemble dash in reverse
order of disassembly.
ISO mount radio provision
Notes
(Figure A) (Figure B) (Figure C)
(SHOWN WITH ALL TRIM PANELS OFF)
(shown with all trim panels off)
INSTALLATION INSTRUCTIONS FOR PART 99-7414
METRA. The World’s best kits.
™
metraonline.com1-800-221-0932
© COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION
REV. 8/21/2013 INST99-7414
KNOWLEDGE IS POWER
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
Metra recommends MECP
certified technicians
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 99-7414
METRA. The World’s best kits.
™
metraonline.com1-800-221-0932
© COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION
REV. 8/21/2013 INST99-7414
KNOWLEDGE IS POWER
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
Metra recomienda técnicos
con certificación del Programa
de Certificación en Electrónica
Móvil (Mobile Electronics
Certification Program, MECP).
EL CONOCIMIENTO ES PODER
Mejore sus habilidades de instalación y
fabricación inscribiéndose en la escuela de
dispositivos electrónicos móviles más reconocida
y respetada de nuestra industria. Regístrese en
www.installerinstitute.com o llame al
800-354-6782 para obtener más información y
avance hacia un futuro mejor.
Page is loading ...
Page is loading ...
Page is loading ...
/
