Gigabyte MW50-SV0 User manual

Category
Server/workstation motherboards
Type
User manual
MW50-SV0
LGA2011 sockets R3 motherboard for Intel® E5-1600 V3/V4/E5-2600 V3/V4 series
processor
User's Manual
Rev. 1002
Copyright
© 2019 GIGA-BYTE TECHNOLOGY CO., LTD. All rights reserved.
The trademarks mentioned in this manual are legally registered to their respective owners.
Disclaimer
Information in this manual is protected by copyright laws and is the property of GIGABYTE.
Changes to the specications and features in this manual may be made by GIGABYTE without
prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or pub-
lished in any form or by any means without GIGABYTE's prior written permission.
Documentation Classications
In order to assist in the use of this product, GIGABYTE provides the following types of documentations:
For detailed product information, carefully read the User's Manual.
For More Information
For related product specications, the latest rmware and software, and related information, please visit
our website at:
http://www.gigabyte.com
For GIGABYTE distributors and resellers, additional sales & marketing materials are available from our
reseller portal:
http://reseller.b2b.gigabyte.com
For further information & technical assistance, please contact your GIGABYTE sales representative.
You may also message GIGABYTE server directly by email, Facebook or twitter
Email: server[email protected]
Facebook: https://www.facebook.com/gigabyteserver
Twitter: https://twitter.com/GIGABYTEServer
- 3 -
Table of Contents
Box Contents ...................................................................................................................6
MW50-SV0 Motherboard Layout .....................................................................................7
Block Diagram ...............................................................................................................10
Chapter 1 Hardware Installation ...................................................................................11
1-1 Installation Precautions .................................................................................. 11
1-2 ProductSpecications .................................................................................... 12
1-3 Installing the CPU and CPU Cooler ............................................................... 14
1-3-1 Installing the CPU ...................................................................................................14
1-3-2 Installing the CPU Cooler .......................................................................................17
1-4 Installing the Memory ..................................................................................... 18
1-4-1 FourChannelMemoryConguration .....................................................................18
1-4-2 Installing a Memory ...............................................................................................19
1-4-3 DIMM Population Table .........................................................................................19
1-5 Back Panel Connectors .................................................................................. 20
1-6 Internal Connectors ........................................................................................ 21
1-7 Jumper Settings ............................................................................................. 32
Chapter 2 BIOS Setup ..................................................................................................37
2-1 The Main Menu .............................................................................................. 39
2-2 Advanced Menu ............................................................................................. 41
2-2-1 Serial Port Console Redirection .............................................................................42
2-2-2 PCI Subsystem Settings .........................................................................................46
2-2-2-1 PCI Express Settings ..............................................................................................48
2-2-2-2 PCI Hot-Plug Settings .............................................................................................50
2-2-3 Network Stack ........................................................................................................51
2-2-4 CSMConguration .................................................................................................52
2-2-5 PostReportConguration ......................................................................................54
2-2-6 Trusted Computing .................................................................................................55
2-2-7 USBConguration ..................................................................................................56
2-2-8 ChipsetConguration .............................................................................................57
2-2-9 HW Monitor ............................................................................................................58
2-2-10 Intel(R) Thunderbolt ...............................................................................................59
2-11 SIOConguration ...................................................................................................61
2-2-12 iSCSIConguration ................................................................................................65
2-2-13 Intel (R) Ethernet Connection I218-LM ...................................................................66
Intel (R) I210 Gigabit Network Connection .............................................................66
2-2-14 Driver Health ...........................................................................................................68
- 4 -
2-3 Intel RC Setup Menu ...................................................................................... 69
2-3-1 ProcessorConguration .........................................................................................70
2-3-1-1 Pre-SocketConguration .......................................................................................73
2-3-2 AdvancedPowerManagementConguration ........................................................74
2-3-2-1 CPU P State Control ...............................................................................................75
2-3-2-2 CPU C State Control ..............................................................................................76
2-3-2-3 CPU T State Control ...............................................................................................77
2-3-3 CommonRefCodeConguration ...........................................................................78
2-3-4 QPIConguration ...................................................................................................79
2-3-5 MemoryConguration ............................................................................................81
2-3-5-1 Memory Topology ...................................................................................................83
2-3-5-2 Memory Thermal ....................................................................................................84
2-3-5-3 Memory Map ...........................................................................................................85
2-3-5-4 MemoryRASConguration ....................................................................................86
2-3-6 IIOConguration ....................................................................................................87
2-3-6-1 IOATConguration .................................................................................................88
2-3-6-2 Intel VT for Directed I/O (VT-d) ..............................................................................89
2-3-7 PCHConguration .................................................................................................90
2-3-7-1 PCH Devices ..........................................................................................................91
2-3-7-2 PCHsSATAConguration ......................................................................................92
2-3-7-2-1 SATA Mode Options ..............................................................................................95
2-3-7-3 PCHSATAConguration ........................................................................................97
2-3-7-3-1 SATA Mode Options ............................................................................................100
2-3-7-4 USBConguration ................................................................................................102
2-3-7-5 AzaliaConguration .............................................................................................103
2-3-8 MiscellaneousConguration ................................................................................104
2-3-9 ServerMEConguration ......................................................................................105
2-3-9-1 ManageabilityApplicationConguration ...............................................................106
2-3-9-1-1MEBx Resolution Settings ...................................................................................108
2-3-10 Runtime Error Logging .........................................................................................109
2-3-10-1 Whea Setting ........................................................................................................110
2-3-10-2 Memory Error Enabling ......................................................................................... 111
2-3-10-3 PCI/PCI-E Error Enabling .....................................................................................112
2-4 Event Logs Menu ......................................................................................... 113
2-4-1 Change Smbios Event Log Settings ..................................................................... 114
2-4-2 View Smbios Event Log ........................................................................................ 115
2-5 Security Menu .............................................................................................. 116
2-5-1 Secure Boot menu ............................................................................................... 117
2-5-1-1 Key Management ...............................................................................................118
2-6 Boot Menu .................................................................................................... 120
2-7 Save & Exit Menu ......................................................................................... 122
2-8 BIOS POST Codes ...................................................................................... 124
- 5 -
2-9 BIOS POST Beep code ................................................................................ 128
2-9-1 PEI Beep Codes ...................................................................................................128
2-9-2 DEX Beep Codes .................................................................................................128
2-10 BIOS Recovery Instruction ........................................................................... 129
Chapter 3 Appendix ....................................................................................................131
3-1 Regulatory Statements ................................................................................. 131
- 6 -
Box Contents
Motherboard
Driver CD
Two SATA cables
I/O Shield
Bracket mini PCI-e Card
 2-wayPCI-ebridgeCrossrecable
2-way PCI-e bridge SLI cable
3-way PCI-e bridge SLI small card
The box contents above are for reference only and the actual items shall depend on the product package you obtain.
The box contents are subject to change without notice.
The motherboard image is for reference only.
- 7 -
MW50-SV0 Motherboard Layout
1 2 3 4 5 6
7
8
9
12
11
10
13
14
16
17
18
19 15
2021222324252728
26
34
35
36
37
33
29
30
31
32
38
39
40
41
42
43
44
45
47
48
46
49 53
55
52
56
50 51
54
- 8 -
Item Code Description
1 COM1 PS/2 connector (top)/USB 2.0 ports (buttom)
2 HD_AUDIO Audio connectors
3 USB3_LAN1 LAN1 port (top) / USB 3.0 ports (bottom)/I218/
With Intel vPro management function
4 USB3_LAN2 LAN2 port (top) / USB 3.0 ports (bottom)/I210
5 USB2_LAN3 LAN3 port (top) / USB 2.0 ports (bottom)/I210
6 PS2_USB2 PS/2 connector (top)/USB 2.0 ports (buttom)
7 PMBUS PMBus connector
8 DIMM_P0_A0 Channel 1 slot 0
9 DIMM_P0_A1 Channel 1 slot 1
10 DIMM_P0_B0 Channel 2 slot 0
11 DIMM_P0_B1 Channel 2 slot 1
12 SYS_FAN0 System fan connector#0
13 P12V_AUX1 8 pin power connector
14 CPU Intel LGA2011 Socket R3
15 SYS_FAN1 System fan connector#1
16 DIMM_P0_D1 Channel 4 slot 1
17 DIMM_P0_D0 Channel 4 slot 0
18 DIMM_P0_C1 Channel 3 slot 1
19 DIMM_P0_C0 Channel 3 slot 0
20 ATX 24 pin main power connector
21 SSATA_SGP1 sSATA SGPIO header
22 SATA_SGP1 SATA SGPIO header
23 MSATA mSATA connector
24 SATA_0_1/SATA_2_3 SATA 3 6Gb/s connectors
25 SSATA_0_1/SSATA_2_3 sSATA 3 6Gb/s connectors
26 CLR_CMOS Clear CMOS jumper
27 SYS_FAN2 System fan connector#2
28 SYS_FAN1 System fan connector#1
29 USB3_A Type A USB 3.0 connector
30 SATA_DOM4 SATA port 4 DOM support jumper
31 F_USB3 USB3.0 header
32 F_USB2 USB2.0 header
33 CASE_OPEN Case open intrusion alert header
34 SATA4 SATA 3 6Gb/s connectors
35 ME_RCVR ME recovery jumper
36 ME_UPDATE ME update jumper
37 SW_RAID Software RAID Key header
38 GSATA0/GSATA1/GSATA2/GSATA3 SATA 3 6Gb/s connectors
39 BP_1 HDD back plane board header
40 LAN3_ACT LAN port 3 active LED header
41 FP_1 Front panel header
42 COM2 Serial port cable connector
- 9 -
43 SPDIF_IN S/PDIF in header
44 F_AUDIO Front audio connector
45 PCI_1 PCI 32/33MHz slot
46 BIOS_PWD Clearing Supervisor Password jumper
47 BIOS_RCVR BIOS recovery jumper
48 PCIE_1 PCI Express x16 slot (Running at x8/Shared
bandwidth with MEZZ_1)
49 PCIE_3 PCI Express x16 slot
50 TPM TPM module connector
51 SPDIF_OUT S/PDIF out header
52 MEZZ_1 Mezzine slot (x4 slot/Proprietary/Running at
x4)
53 PCIE_4 PCI Express x16 slot
54 BAT Battery socket
55 TBT Thunderbolt addin-in card connector
56 CPU0_FAN CPU0 fan connector
CAUTION! If a SATA type hard drive is connected to the motherboard, please ensure the jumper is
closed and set to 2-3 pins (Default setting), in order to reduce any risk of hard disk damage. Please
refer to Page 32 for SATA_DOM jumper setting instruction.
- 10 -
Block Diagram
- 11 - Hardware Installation
1-1 Installation Precautions
The motherboard contains numerous delicate electronic circuits and components which can
become damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully read
the user's manual and follow these procedures:
• Prior to installation, do not remove or break motherboard S/N (Serial Number) sticker or
warranty sticker provided by your dealer. These stickers are required for warranty validation.
• Always remove the AC power by unplugging the power cord from the power outlet before
installing or removing the motherboard or other hardware components.
• When connecting hardware components to the internal connectors on the motherboard,
make sure they are connected tightly and securely.
• When handling the motherboard, avoid touching any metal leads or connectors.
• It is best to wear an electrostatic discharge (ESD) wrist strap when handling electronic
components such as a motherboard, CPU or memory. If you do not have an ESD wrist
strap,keepyourhandsdryandrsttouchametalobjecttoeliminatestaticelectricity.
Prior to installing the motherboard, please have it on top of an antistatic pad or within an
electrostatic shielding container.
• Before unplugging the power supply cable from the motherboard, make sure the power
supply has been turned off.
• Before turning on the power, make sure the power supply voltage has been set according to
the local voltage standard.
• Before using the product, please verify that all cables and power connectors of your
hardware components are connected.
• To prevent damage to the motherboard, do not allow screws to come in contact with the
motherboard circuit or its components.
• Make sure there are no leftover screws or metal components placed on the motherboard or
within the computer casing.
• Do not place the computer system on an uneven surface
.
• Do not place the computer system in a high-temperature environment.
• Turning on the computer power during the installation process can lead to damage to
system components as well as physical harm to the user.
• If you are uncertain about any installation steps or have a problem related to the use of the
product,pleaseconsultacertiedcomputertechnician.
Chapter 1 Hardware Installation
Hardware Installation - 12 -
1-2 ProductSpecications
CPU Support for Intel® Xeon® E5-1600 V3/V4/E5-2600 V3/V4 series processors in
the LGA2011-3 package
L3 cache varies with CPU
Enhanced Intel SpeedStep Technology (EIST)
Support Intel Virtualization Technology (VT)
Chipset Intel® C612 Express (Wellsburg) Chipset
Memory 8 x DIMM slots
DDR4 memory supported only
Quad channel memory architecture
ECC RDIMM / LRDIMM modules supported
Single and dual rank RDIMM modules up to 32GB supported
3DS LRDIMM modules up to 128GB supported
1.2V modules: 1600/1866/2133/2400 MHz
LAN 1 x Intel® I218 controller/Intel® vPro supported
2 x Intel® I210 controllers
Multi-Graphics
Technology
Support for 3-Way/2-Way AMD CrossFir/NVIDIA® SLI Technology
Audio RealtekALC887codecHighDenitionAudio
7.1 Channel
Expansion Slots 2 x PCI Express x16 slot, running at x16 (Gen3/PCIE_4/PCIE_3)
1 x PCI Express x16 slot, running at x8 (Gen3/PCIE_1/Shard bandwidth with
MEZZ_1)
1 x PCI 32bit/33MHz slot
Storage Interface Intel® C612 Express controller supports 10 x SATA3 6Gb/s connectors
(SATA_0_1/SATA_2_3/SSATA_0_1/SSATA_2_3/SATA4/MSATA) support for
Intel RSTe SATA RAID 0/1/5/10
Marvell® 88SE9230 controller 4 x SATA3 6Gb/s connectors (GSATA0/1/2/3)
support for SATA RAID 0/1/10
USB
Up to 7 USB 3.0 ports (1 Type A connector, 4 on the back panel, 2 additional
ports via the USB brackets connected to the internal USB headers)
Up to 6 USB 2.0 ports (4 on the back panel, 2 additional ports via the USB
brackets connected to the internal USB headers)
- 13 - Hardware Installation
Internal
Connectors
1 x 24-pin ATX main power connector
1 x 8-pin ATX 12V power connector
13 x SATA3 6Gb/s connectors
1 x mSATA connector
1 x PMBus header
1 x CPU fan header
4 x System fan headers
1 x Front panel header
1 x HDD Back plane borad header
1 x USB 3.0 header
1 x USB 2.0 header
1 x USB 3.0 Type A connector
1 x TPM module connector
1 x Serial port connector
1 x Front audio connector
1 x Thunderbolt connector
2 x SATA SPGIO headers
1 x S/PDIF in header
1 x S/PDIF out header
1 x Software RAID key connector
1 x LAN3 Active LED header
1 x Chassis intrusion alert header
Rear Panel I/O 4 x USB 3.0 ports
4 x USB 2.0 ports
3 x RJ-45 ports
1 x COM port
1 x PS/2 connector
5 x Audio connectors (Center/Subwoofer Speaker Out, Rear Speaker Out, Line
In/Mic In, Line Out, Headphone)
1 x Optical SPDIF Out
I/O Controller ITE® 8732F chip
Hardware
Monitor
System voltage detection
CPU/System temperature detection
CPU/System fan speed detection
CPU/System fan speed control
* Whether the CPU/system fan speed control function is supported will depend on
the CPU/system cooler you install.
BIOS 1x128Mbitash
AMI BIOS
Form Factor ATX Form Factor; 12 inch x 9.6 inch
* GIGABYTEreservestherighttomakeanychangestotheproductspecicationsandproduct-relatedinformationwithout
prior notice.
Hardware Installation - 14 -
1-3 Installing the CPU and CPU Cooler
1-3-1 Installing the CPU
A. Locate the alignment keys on the motherboard CPU socket and the notches on the CPU.
Read the following guidelines before you begin to install the CPU:
• Make sure that the motherboard supports the CPU.
• Always turn off the computer and unplug the power cord from the power outlet before installing
the CPU to prevent hardware damage.
• Locate the pin one of the CPU. The CPU cannot be inserted if oriented incorrectly. (Or you may
locate the notches on both sides of the CPU and alignment keys on the CPU socket.)
• Apply an even and thin layer of thermal grease on the surface of the CPU.
• Do not turn on the computer if the CPU cooler is not installed, otherwise overheating and
damage of the CPU may occur.
• SettheCPUhostfrequencyinaccordancewiththeCPUspecications.Itisnotrecommended
thatthesystembusfrequencybesetbeyondhardwarespecicationssinceitdoesnotmeetthe
standard requirements for the peripherals. If you wish to set the frequency beyond the standard
specifications, please do so according to your hardware specifications including the CPU,
graphics card, memory, hard drive, etc.
Pin One Corner
of the CPU Socket LGA2011-3 CPU
Triangle Pin One Marking on the CPU
Alignment Key
Alignment Key
Notch
Notch
Notch
Notch
- 15 - Hardware Installation
Step 1:
Push the lever closest to the "unlock" marking " "
(below referred as lever A) down and away from
the socket to release it.
Step 4:
HoldtheCPUwithyourthumbandindexngers.Align
the CPU pin one marking (triangle) with the pin one
corner of the CPU socket (or align the CPU notches with
the socket alignment keys) and carefully insert the CPU
into the socket vertically.
B. Follow the steps below to correctly install the CPU into the motherboard CPU socket.
Before installing the CPU, make sure to turn off the computer and unplug the power cord
from the power outlet to prevent damage to the CPU.
To protect the socket contacts, do not remove the protective plastic cover unless the CPU is
inserted into the CPU socket. Save the cover properly and replace it if the CPU is removed.
Step 2:
Push the lever closest to the "lock" marking " "
(below referred as lever B) down and away from
the socket. Then lift the lever.
Lever B
Step 3:
Gently press lever A to allow the load plate to rise.
Open the load plate. (Note: DO NOT touch the socket
contacts after the load plate is opened.)
Lever A
Hardware Installation - 16 -
Step 5:
Once the CPU is properly inserted, carefully replace the
load plate. Then secure lever B under its retention tab.
The protective plastic cover may pop off from the load
plate during the process of engaging the lever. Remove
the cover. Save the cover properly and always replace it
when the CPU is not installed.
Lever B
Lever A
Step 6:
Finally, secure lever A under its retention tab to
complete the installation of the CPU.
- 17 - Hardware Installation
1-3-2 Installing the CPU Cooler
Refer to the steps below to correctly install the CPU cooler on the motherboard. (Actual installation process
may differ depending the CPU cooler to be used. Refer to the user's manual for your CPU cooler.)
Please pay more attention when removing the CPU cooler because the thermal grease/tape
between the CPU cooler and CPU may adhere to the CPU. Inadequately removing the CPU cooler
may damage the CPU.
Step 1:
Apply an even and thin layer of thermal grease on the
surface of the installed CPU.
Step 2:
Place the cooler atop the CPU, aligning the four
mounting screws with the mounting holes on the
ILM. (If your cooler has a fan grill which may cause
interference when you tighten the screws, remove it
rstandreplaceitaftertighteningthescrews.)
Step 3:
Use one hand to hold the cooler and the other to
tighten the screws in a diagonal sequence with a
screw driver. Begin tightening a screw with a few
turns and repeat with the screw diagonally opposite
the one you just tightened. Then do the same to the
other pair. Next, fully tighten the four screws.
Step 4:
Finally, attach the power connector of the CPU
cooler to the CPU fan header (CPU_FAN) on the
motherboard.
Hardware Installation - 18 -
1-4-1 FourChannelMemoryConguration
This motherboard provides Eight DDR4 memory sockets and supports Four Channel Technology. After
thememory isinstalled, theBIOS willautomatically detectthe specicationsand capacityof thememory.
Enabling Four Channel memory mode will be four times of the original memory bandwidth.
The four DDR4 memory sockets are divided into four channels each channel has two memory sockets as
following:
Channel 1: DIMM_P0_A0/DIMM_P0_A1
Channel 2: DIMM_P0_B0/DIMM_P0_B1
Channel 3: DIMM_P0_C0/DIMM_P0_C1
Channel 4: DIMM_P0_D0/DIMM_P0_D1
1-4 Installing the Memory
Read the following guidelines before you begin to install the memory:
Make sure that the motherboard supports the memory. It is recommended that memory of the
same capacity, brand, speed, and chips be used.
Always turn off the computer and unplug the power cord from the power outlet before installing
the memory to prevent hardware damage.
Memory modules have a foolproof design. A memory module can be installed in only one
direction. If you are unable to insert the memory, switch the direction.
Due to CPU limitations, read the following guidelines before installing the memory in Four Channel mode.
1. Four Channel mode cannot be enabled if only one DDR4 memory module is installed.
2. When enabling Four Channel mode with two or four memory modules, it is recommended that
memory of the same capacity, brand, speed, and chips be used for optimum performance.
DIMM_P0_A0
DIMM_P0_A1
DIMM_P0_B0
DIMM_P0_B1
DIMM_P0_D1
DIMM_P0_D0
DIMM_P0_C1
DIMM_P0_C0
WhenonlyoneDIMMisused,itmustbepopulatedinmemoryslot0rst.
Memory populated sequence must be followed with slot0/slot1.
System will not boot normally with incorrect populated sequence.
- 19 - Hardware Installation
1-4-2 Installing a Memory
Before installing a memory module, make sure to turn off the computer and unplug the power
cord from the power outlet to prevent damage to the memory module.
Be sure to install DDR4 DIMMs on this motherboard.
Installation Step:
Step 1. Insert the DIMM memory module vertically into the DIMM slot, and push it down.
Step 2. Close the plastic clip at both edges of the DIMM slots to lock the DIMM module.
Note: For dual-channel operation, DIMMs must be installed in matched pairs.
Step 3. Reverse the installation steps when you wish to remove the DIMM module.
2
2
1
1-4-3 DIMM Population Table
TwoSlotsChannelRDIMMPopulationCongurationWithinaChannel
NOTE!
DDR4 2400MHz is only available on Intel Xeon® E5-2600 V4 processor.
Type
Ranks Per
DIMM and
Data Width
Speed (MT/s);
Slot Per Channel (SPC) and DIMM Per Channel (DPC)
RDIMM
RDIMM
RDIMM
RDIMM
LRDIMM
LRDIMM
3DS
SRx4 2133
2133
2133
2133
2133
2133
2133
2133
2133
2133
1866
1866
1866
1866
2133
1 Slot Per Channel
1DPC
2 Slot Per Channel
1DPC 2DPC
SRx8
DRx8
DRx4
QRx4
2400 2400 24008Rx4
Hardware Installation - 20 -
1-5 Back Panel Connectors
PS/2 Keyboard/Mouse Port
Coonnect a PS/2 keyboard or mouse to this port.
USB 2.0 Port
The USB port supports the USB 2.0 specification. Use this port for USB devices such as a USB
keyboard/mouse,USBprinter,USBashdriveandetc.
USB 3.0 Port
The USB port supports the USB 2.0 specification. Use this port for USB devices such as a USB
keyboard/mouse,USBprinter,USBashdriveandetc.
RJ-45 LAN Ports (Gigabit Ethernet LAN Ports)
The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. The following
describes the states of the LAN port LEDs.
Center/Subwoofer Speaker Out Jack (Orange)
Usethisaudiojacktoconnectcenter/subwooferspeakersina5.1/7.1-channelaudioconguration.
Rear Speaker Out Jack (Black)
Usethisaudiojacktoconnectrearspeakersina7.1-channelaudioconguration.
Optical S/PDIF Out Connector
This connector provides digital audio out to an external audio system that supports digital optical audio.
Before using this feature, ensure that your audio system provides an optical digital audio in connector.
Line In Jack (Blue)
The default line in jack. Use this audio jack for line in devices such as an optical drive, walkman, etc.
Line Out Jack (Green)
The default line out jack. Use this audio jack for a headphone or 2-channel speaker. This jack can be
usedtoconnectfrontspeakersina4/5.1/7.1-channelaudioconguration.
Mic In Jack (Pink)
The default Mic in jack. Microphones must be connected to this jack.
Serial Port
Connects to serial-based mouse or data processing devices.
Link
Activity LED
Speed LED
10/100/1000 LAN Port
Speed LED:
State Description
Yellow On 1 Gbps data rate
Green On 100 Mbps data rate
Off 10 Mbps data rate
Link/Activity LED:
State Description
On Link between system and networ k or no
access
Blinking Data transmission or receiving is occurring
Off No data transmission or receiving is occurring
• Whenremovingthecableconnectedtoabackpanelconnector,rstremovethecablefromyour
device and then remove it from the motherboard.
• When removing the cable, pull it straight out from the connector. Do not rock it side to side to
prevent an electrical short inside the cable connector.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132

Gigabyte MW50-SV0 User manual

Category
Server/workstation motherboards
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI