Gigabyte MW50-SV0 User manual

MW50-SV0

LGA2011 sockets R3 motherboard for Intel® E5-1600 V3/V4/E5-2600 V3/V4 series

processor

User's Manual

Rev. 1002

Copyright

The trademarks mentioned in this manual are legally registered to their respective owners.

Disclaimer

Information in this manual is protected by copyright laws and is the property of GIGABYTE.

Changes to the specications and features in this manual may be made by GIGABYTE without

prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or pub-

lished in any form or by any means without GIGABYTE's prior written permission.

Documentation Classications

In order to assist in the use of this product, GIGABYTE provides the following types of documentations:

 For detailed product information, carefully read the User's Manual.

For More Information

For related product specications, the latest rmware and software, and related information, please visit

our website at:

http://www.gigabyte.com

For GIGABYTE distributors and resellers, additional sales & marketing materials are available from our

reseller portal:

http://reseller.b2b.gigabyte.com

For further information & technical assistance, please contact your GIGABYTE sales representative.

You may also message GIGABYTE server directly by email, Facebook or twitter

Email: server[email protected]

Facebook: https://www.facebook.com/gigabyteserver

Twitter: https://twitter.com/GIGABYTEServer

- 3 -

Table of Contents

Box Contents ...................................................................................................................6

MW50-SV0 Motherboard Layout .....................................................................................7

Block Diagram ...............................................................................................................10

Chapter 1 Hardware Installation ...................................................................................11

1-1 Installation Precautions .................................................................................. 11

1-2 ProductSpecications .................................................................................... 12

1-3 Installing the CPU and CPU Cooler ............................................................... 14

1-3-1 Installing the CPU ...................................................................................................14

1-3-2 Installing the CPU Cooler .......................................................................................17

1-4 Installing the Memory ..................................................................................... 18

1-4-1 FourChannelMemoryConguration .....................................................................18

1-4-2 Installing a Memory ...............................................................................................19

1-4-3 DIMM Population Table .........................................................................................19

1-5 Back Panel Connectors .................................................................................. 20

1-6 Internal Connectors ........................................................................................ 21

1-7 Jumper Settings ............................................................................................. 32

Chapter 2 BIOS Setup ..................................................................................................37

2-1 The Main Menu .............................................................................................. 39

2-2 Advanced Menu ............................................................................................. 41

2-2-1 Serial Port Console Redirection .............................................................................42

2-2-2 PCI Subsystem Settings .........................................................................................46

2-2-2-1 PCI Express Settings ..............................................................................................48

2-2-2-2 PCI Hot-Plug Settings .............................................................................................50

2-2-3 Network Stack ........................................................................................................51

2-2-4 CSMConguration .................................................................................................52

2-2-5 PostReportConguration ......................................................................................54

2-2-6 Trusted Computing .................................................................................................55

2-2-7 USBConguration ..................................................................................................56

2-2-8 ChipsetConguration .............................................................................................57

2-2-9 HW Monitor ............................................................................................................58

2-2-10 Intel(R) Thunderbolt ...............................................................................................59

2-11 SIOConguration ...................................................................................................61

2-2-12 iSCSIConguration ................................................................................................65

2-2-13 Intel (R) Ethernet Connection I218-LM ...................................................................66

Intel (R) I210 Gigabit Network Connection .............................................................66

2-2-14 Driver Health ...........................................................................................................68

- 4 -

2-3 Intel RC Setup Menu ...................................................................................... 69

2-3-1 ProcessorConguration .........................................................................................70

2-3-1-1 Pre-SocketConguration .......................................................................................73

2-3-2 AdvancedPowerManagementConguration ........................................................74

2-3-2-1 CPU P State Control ...............................................................................................75

2-3-2-2 CPU C State Control ..............................................................................................76

2-3-2-3 CPU T State Control ...............................................................................................77

2-3-3 CommonRefCodeConguration ...........................................................................78

2-3-4 QPIConguration ...................................................................................................79

2-3-5 MemoryConguration ............................................................................................81

2-3-5-1 Memory Topology ...................................................................................................83

2-3-5-2 Memory Thermal ....................................................................................................84

2-3-5-3 Memory Map ...........................................................................................................85

2-3-5-4 MemoryRASConguration ....................................................................................86

2-3-6 IIOConguration ....................................................................................................87

2-3-6-1 IOATConguration .................................................................................................88

2-3-6-2 Intel VT for Directed I/O (VT-d) ..............................................................................89

2-3-7 PCHConguration .................................................................................................90

2-3-7-1 PCH Devices ..........................................................................................................91

2-3-7-2 PCHsSATAConguration ......................................................................................92

2-3-7-2-1 SATA Mode Options ..............................................................................................95

2-3-7-3 PCHSATAConguration ........................................................................................97

2-3-7-3-1 SATA Mode Options ............................................................................................100

2-3-7-4 USBConguration ................................................................................................102

2-3-7-5 AzaliaConguration .............................................................................................103

2-3-8 MiscellaneousConguration ................................................................................104

2-3-9 ServerMEConguration ......................................................................................105

2-3-9-1 ManageabilityApplicationConguration ...............................................................106

2-3-9-1-1MEBx Resolution Settings ...................................................................................108

2-3-10 Runtime Error Logging .........................................................................................109

2-3-10-1 Whea Setting ........................................................................................................110

2-3-10-2 Memory Error Enabling ......................................................................................... 111

2-3-10-3 PCI/PCI-E Error Enabling .....................................................................................112

2-4 Event Logs Menu ......................................................................................... 113

2-4-1 Change Smbios Event Log Settings ..................................................................... 114

2-4-2 View Smbios Event Log ........................................................................................ 115

2-5 Security Menu .............................................................................................. 116

2-5-1 Secure Boot menu ............................................................................................... 117

2-5-1-1 Key Management ...............................................................................................118

2-6 Boot Menu .................................................................................................... 120

2-7 Save & Exit Menu ......................................................................................... 122

2-8 BIOS POST Codes ...................................................................................... 124

- 5 -

2-9 BIOS POST Beep code ................................................................................ 128

2-9-1 PEI Beep Codes ...................................................................................................128

2-9-2 DEX Beep Codes .................................................................................................128

2-10 BIOS Recovery Instruction ........................................................................... 129

Chapter 3 Appendix ....................................................................................................131

3-1 Regulatory Statements ................................................................................. 131

- 6 -

Box Contents

Motherboard

Driver CD

Two SATA cables

I/O Shield

Bracket mini PCI-e Card

 2-wayPCI-ebridgeCrossrecable

2-way PCI-e bridge SLI cable

3-way PCI-e bridge SLI small card

• The box contents above are for reference only and the actual items shall depend on the product package you obtain.

The box contents are subject to change without notice.

• The motherboard image is for reference only.

- 7 -

MW50-SV0 Motherboard Layout

1 2 3 4 5 6

7

8

9

12

11

10

13

14

16

17

18

19 15

2021222324252728

26

34

35

36

37

33

29

30

31

32

38

39

40

41

42

43

44

45

47

48

46

49 53

55

52

56

50 51

54

- 8 -

Item Code Description

1 COM1 PS/2 connector (top)/USB 2.0 ports (buttom)

2 HD_AUDIO Audio connectors

3 USB3_LAN1 LAN1 port (top) / USB 3.0 ports (bottom)/I218/

With Intel vPro management function

4 USB3_LAN2 LAN2 port (top) / USB 3.0 ports (bottom)/I210

5 USB2_LAN3 LAN3 port (top) / USB 2.0 ports (bottom)/I210

6 PS2_USB2 PS/2 connector (top)/USB 2.0 ports (buttom)

7 PMBUS PMBus connector

8 DIMM_P0_A0 Channel 1 slot 0

9 DIMM_P0_A1 Channel 1 slot 1

10 DIMM_P0_B0 Channel 2 slot 0

11 DIMM_P0_B1 Channel 2 slot 1

12 SYS_FAN0 System fan connector#0

13 P12V_AUX1 8 pin power connector

14 CPU Intel LGA2011 Socket R3

15 SYS_FAN1 System fan connector#1

16 DIMM_P0_D1 Channel 4 slot 1

17 DIMM_P0_D0 Channel 4 slot 0

18 DIMM_P0_C1 Channel 3 slot 1

19 DIMM_P0_C0 Channel 3 slot 0

20 ATX 24 pin main power connector

21 SSATA_SGP1 sSATA SGPIO header

22 SATA_SGP1 SATA SGPIO header

23 MSATA mSATA connector

24 SATA_0_1/SATA_2_3 SATA 3 6Gb/s connectors

25 SSATA_0_1/SSATA_2_3 sSATA 3 6Gb/s connectors

26 CLR_CMOS Clear CMOS jumper

27 SYS_FAN2 System fan connector#2

28 SYS_FAN1 System fan connector#1

29 USB3_A Type A USB 3.0 connector

30 SATA_DOM4 SATA port 4 DOM support jumper

31 F_USB3 USB3.0 header

32 F_USB2 USB2.0 header

33 CASE_OPEN Case open intrusion alert header

34 SATA4 SATA 3 6Gb/s connectors

35 ME_RCVR ME recovery jumper

36 ME_UPDATE ME update jumper

37 SW_RAID Software RAID Key header

38 GSATA0/GSATA1/GSATA2/GSATA3 SATA 3 6Gb/s connectors

39 BP_1 HDD back plane board header

40 LAN3_ACT LAN port 3 active LED header

41 FP_1 Front panel header

42 COM2 Serial port cable connector

- 9 -

43 SPDIF_IN S/PDIF in header

44 F_AUDIO Front audio connector

45 PCI_1 PCI 32/33MHz slot

46 BIOS_PWD Clearing Supervisor Password jumper

47 BIOS_RCVR BIOS recovery jumper

48 PCIE_1 PCI Express x16 slot (Running at x8/Shared

bandwidth with MEZZ_1)

49 PCIE_3 PCI Express x16 slot

50 TPM TPM module connector

51 SPDIF_OUT S/PDIF out header

52 MEZZ_1 Mezzine slot (x4 slot/Proprietary/Running at

x4)

53 PCIE_4 PCI Express x16 slot

54 BAT Battery socket

55 TBT Thunderbolt addin-in card connector

56 CPU0_FAN CPU0 fan connector

CAUTION! If a SATA type hard drive is connected to the motherboard, please ensure the jumper is

closed and set to 2-3 pins (Default setting), in order to reduce any risk of hard disk damage. Please

refer to Page 32 for SATA_DOM jumper setting instruction.

- 10 -

Block Diagram

- 11 - Hardware Installation

1-1 Installation Precautions

The motherboard contains numerous delicate electronic circuits and components which can

become damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully read

the user's manual and follow these procedures:

• Prior to installation, do not remove or break motherboard S/N (Serial Number) sticker or

warranty sticker provided by your dealer. These stickers are required for warranty validation.

• Always remove the AC power by unplugging the power cord from the power outlet before

installing or removing the motherboard or other hardware components.

• When connecting hardware components to the internal connectors on the motherboard,

make sure they are connected tightly and securely.

• When handling the motherboard, avoid touching any metal leads or connectors.

• It is best to wear an electrostatic discharge (ESD) wrist strap when handling electronic

components such as a motherboard, CPU or memory. If you do not have an ESD wrist

strap,keepyourhandsdryandrsttouchametalobjecttoeliminatestaticelectricity.

•

Prior to installing the motherboard, please have it on top of an antistatic pad or within an

electrostatic shielding container.

• Before unplugging the power supply cable from the motherboard, make sure the power

supply has been turned off.

• Before turning on the power, make sure the power supply voltage has been set according to

the local voltage standard.

• Before using the product, please verify that all cables and power connectors of your

hardware components are connected.

• To prevent damage to the motherboard, do not allow screws to come in contact with the

motherboard circuit or its components.

• Make sure there are no leftover screws or metal components placed on the motherboard or

within the computer casing.

• Do not place the computer system on an uneven surface

.

• Do not place the computer system in a high-temperature environment.

• Turning on the computer power during the installation process can lead to damage to

system components as well as physical harm to the user.

• If you are uncertain about any installation steps or have a problem related to the use of the

product,pleaseconsultacertiedcomputertechnician.

Chapter 1 Hardware Installation

Hardware Installation - 12 -

1-2 ProductSpecications

CPU Support for Intel® Xeon® E5-1600 V3/V4/E5-2600 V3/V4 series processors in

the LGA2011-3 package

L3 cache varies with CPU

Enhanced Intel SpeedStep Technology (EIST)

Support Intel Virtualization Technology (VT)

Chipset Intel® C612 Express (Wellsburg) Chipset

Memory 8 x DIMM slots

DDR4 memory supported only

Quad channel memory architecture

ECC RDIMM / LRDIMM modules supported

Single and dual rank RDIMM modules up to 32GB supported

3DS LRDIMM modules up to 128GB supported

1.2V modules: 1600/1866/2133/2400 MHz

LAN 1 x Intel® I218 controller/Intel® vPro supported

2 x Intel® I210 controllers

Multi-Graphics

Technology

Support for 3-Way/2-Way AMD CrossFir™/NVIDIA® SLI™ Technology

Audio RealtekALC887codecHighDenitionAudio

7.1 Channel

Expansion Slots  2 x PCI Express x16 slot, running at x16 (Gen3/PCIE_4/PCIE_3)

1 x PCI Express x16 slot, running at x8 (Gen3/PCIE_1/Shard bandwidth with

MEZZ_1)

 1 x PCI 32bit/33MHz slot

Storage Interface Intel® C612 Express controller supports 10 x SATA3 6Gb/s connectors

(SATA_0_1/SATA_2_3/SSATA_0_1/SSATA_2_3/SATA4/MSATA) support for

Intel RSTe SATA RAID 0/1/5/10

Marvell® 88SE9230 controller 4 x SATA3 6Gb/s connectors (GSATA0/1/2/3)

support for SATA RAID 0/1/10

USB

Up to 7 USB 3.0 ports (1 Type A connector, 4 on the back panel, 2 additional

ports via the USB brackets connected to the internal USB headers)

Up to 6 USB 2.0 ports (4 on the back panel, 2 additional ports via the USB

brackets connected to the internal USB headers)

- 13 - Hardware Installation

Internal

Connectors

1 x 24-pin ATX main power connector

1 x 8-pin ATX 12V power connector

13 x SATA3 6Gb/s connectors

1 x mSATA connector

1 x PMBus header

1 x CPU fan header

4 x System fan headers

1 x Front panel header

1 x HDD Back plane borad header

1 x USB 3.0 header

1 x USB 2.0 header

1 x USB 3.0 Type A connector

1 x TPM module connector

1 x Serial port connector

1 x Front audio connector

1 x Thunderbolt connector

2 x SATA SPGIO headers

1 x S/PDIF in header

1 x S/PDIF out header

1 x Software RAID key connector

1 x LAN3 Active LED header

1 x Chassis intrusion alert header

Rear Panel I/O 4 x USB 3.0 ports

4 x USB 2.0 ports

3 x RJ-45 ports

1 x COM port

1 x PS/2 connector

5 x Audio connectors (Center/Subwoofer Speaker Out, Rear Speaker Out, Line

In/Mic In, Line Out, Headphone)

1 x Optical SPDIF Out

I/O Controller ITE® 8732F chip

Hardware

Monitor

System voltage detection

CPU/System temperature detection

CPU/System fan speed detection

CPU/System fan speed control

* Whether the CPU/system fan speed control function is supported will depend on

the CPU/system cooler you install.

BIOS 1x128Mbitash

AMI BIOS

Form Factor ATX Form Factor; 12 inch x 9.6 inch

* GIGABYTEreservestherighttomakeanychangestotheproductspecicationsandproduct-relatedinformationwithout

prior notice.

Hardware Installation - 14 -

1-3 Installing the CPU and CPU Cooler

1-3-1 Installing the CPU

A. Locate the alignment keys on the motherboard CPU socket and the notches on the CPU.

Read the following guidelines before you begin to install the CPU:

• Make sure that the motherboard supports the CPU.

• Always turn off the computer and unplug the power cord from the power outlet before installing

the CPU to prevent hardware damage.

• Locate the pin one of the CPU. The CPU cannot be inserted if oriented incorrectly. (Or you may

locate the notches on both sides of the CPU and alignment keys on the CPU socket.)

• Apply an even and thin layer of thermal grease on the surface of the CPU.

• Do not turn on the computer if the CPU cooler is not installed, otherwise overheating and

damage of the CPU may occur.

• SettheCPUhostfrequencyinaccordancewiththeCPUspecications.Itisnotrecommended

thatthesystembusfrequencybesetbeyondhardwarespecicationssinceitdoesnotmeetthe

standard requirements for the peripherals. If you wish to set the frequency beyond the standard

specifications, please do so according to your hardware specifications including the CPU,

graphics card, memory, hard drive, etc.

Pin One Corner

of the CPU Socket LGA2011-3 CPU

Triangle Pin One Marking on the CPU

Alignment Key

Notch

- 15 - Hardware Installation

Step 1:

Push the lever closest to the "unlock" marking " "

(below referred as lever A) down and away from

the socket to release it.

Step 4:

HoldtheCPUwithyourthumbandindexngers.Align

the CPU pin one marking (triangle) with the pin one

corner of the CPU socket (or align the CPU notches with

the socket alignment keys) and carefully insert the CPU

into the socket vertically.

B. Follow the steps below to correctly install the CPU into the motherboard CPU socket.

•Before installing the CPU, make sure to turn off the computer and unplug the power cord

from the power outlet to prevent damage to the CPU.

•To protect the socket contacts, do not remove the protective plastic cover unless the CPU is

inserted into the CPU socket. Save the cover properly and replace it if the CPU is removed.

Step 2:

Push the lever closest to the "lock" marking " "

(below referred as lever B) down and away from

the socket. Then lift the lever.

Lever B

Step 3:

Gently press lever A to allow the load plate to rise.

Open the load plate. (Note: DO NOT touch the socket

contacts after the load plate is opened.)

Lever A

Hardware Installation - 16 -

Step 5:

Once the CPU is properly inserted, carefully replace the

load plate. Then secure lever B under its retention tab.

The protective plastic cover may pop off from the load

plate during the process of engaging the lever. Remove

the cover. Save the cover properly and always replace it

when the CPU is not installed.

Lever B

Lever A

Step 6:

Finally, secure lever A under its retention tab to

complete the installation of the CPU.

- 17 - Hardware Installation

1-3-2 Installing the CPU Cooler

Refer to the steps below to correctly install the CPU cooler on the motherboard. (Actual installation process

may differ depending the CPU cooler to be used. Refer to the user's manual for your CPU cooler.)

Please pay more attention when removing the CPU cooler because the thermal grease/tape

between the CPU cooler and CPU may adhere to the CPU. Inadequately removing the CPU cooler

may damage the CPU.

Step 1:

Apply an even and thin layer of thermal grease on the

surface of the installed CPU.

Step 2:

Place the cooler atop the CPU, aligning the four

mounting screws with the mounting holes on the

ILM. (If your cooler has a fan grill which may cause

interference when you tighten the screws, remove it

rstandreplaceitaftertighteningthescrews.)

Step 3:

Use one hand to hold the cooler and the other to

tighten the screws in a diagonal sequence with a

screw driver. Begin tightening a screw with a few

turns and repeat with the screw diagonally opposite

the one you just tightened. Then do the same to the

other pair. Next, fully tighten the four screws.

Step 4:

Finally, attach the power connector of the CPU

cooler to the CPU fan header (CPU_FAN) on the

motherboard.

Hardware Installation - 18 -

1-4-1 FourChannelMemoryConguration

This motherboard provides Eight DDR4 memory sockets and supports Four Channel Technology. After

thememory isinstalled, theBIOS willautomatically detectthe specicationsand capacityof thememory.

Enabling Four Channel memory mode will be four times of the original memory bandwidth.

The four DDR4 memory sockets are divided into four channels each channel has two memory sockets as

following:

Channel 1: DIMM_P0_A0/DIMM_P0_A1

Channel 2: DIMM_P0_B0/DIMM_P0_B1

Channel 3: DIMM_P0_C0/DIMM_P0_C1

Channel 4: DIMM_P0_D0/DIMM_P0_D1

1-4 Installing the Memory

Read the following guidelines before you begin to install the memory:

• Make sure that the motherboard supports the memory. It is recommended that memory of the

same capacity, brand, speed, and chips be used.

• Always turn off the computer and unplug the power cord from the power outlet before installing

the memory to prevent hardware damage.

• Memory modules have a foolproof design. A memory module can be installed in only one

direction. If you are unable to insert the memory, switch the direction.

Due to CPU limitations, read the following guidelines before installing the memory in Four Channel mode.

1. Four Channel mode cannot be enabled if only one DDR4 memory module is installed.

2. When enabling Four Channel mode with two or four memory modules, it is recommended that

memory of the same capacity, brand, speed, and chips be used for optimum performance.

DIMM_P0_A0

DIMM_P0_A1

DIMM_P0_B0

DIMM_P0_B1

DIMM_P0_D1

DIMM_P0_D0

DIMM_P0_C1

DIMM_P0_C0

WhenonlyoneDIMMisused,itmustbepopulatedinmemoryslot0rst.

Memory populated sequence must be followed with slot0/slot1.

System will not boot normally with incorrect populated sequence.

- 19 - Hardware Installation

1-4-2 Installing a Memory

Before installing a memory module, make sure to turn off the computer and unplug the power

cord from the power outlet to prevent damage to the memory module.

Be sure to install DDR4 DIMMs on this motherboard.

Installation Step:

Step 1. Insert the DIMM memory module vertically into the DIMM slot, and push it down.

Step 2. Close the plastic clip at both edges of the DIMM slots to lock the DIMM module.

Note: For dual-channel operation, DIMMs must be installed in matched pairs.

Step 3. Reverse the installation steps when you wish to remove the DIMM module.

2

1

1-4-3 DIMM Population Table

TwoSlotsChannelRDIMMPopulationCongurationWithinaChannel

NOTE!

DDR4 2400MHz is only available on Intel Xeon® E5-2600 V4 processor.

Type

Ranks Per

DIMM and

Data Width

Speed (MT/s);

Slot Per Channel (SPC) and DIMM Per Channel (DPC)

RDIMM

LRDIMM

3DS

SRx4 2133

2133

1866

2133

1 Slot Per Channel

1DPC

2 Slot Per Channel

1DPC 2DPC

SRx8

DRx8

DRx4

QRx4

2400 2400 24008Rx4

Hardware Installation - 20 -

1-5 Back Panel Connectors

PS/2 Keyboard/Mouse Port

Coonnect a PS/2 keyboard or mouse to this port.

USB 2.0 Port

The USB port supports the USB 2.0 specification. Use this port for USB devices such as a USB

keyboard/mouse,USBprinter,USBashdriveandetc.

USB 3.0 Port

The USB port supports the USB 2.0 specification. Use this port for USB devices such as a USB

keyboard/mouse,USBprinter,USBashdriveandetc.

RJ-45 LAN Ports (Gigabit Ethernet LAN Ports)

The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. The following

describes the states of the LAN port LEDs.

Center/Subwoofer Speaker Out Jack (Orange)

Usethisaudiojacktoconnectcenter/subwooferspeakersina5.1/7.1-channelaudioconguration.

Rear Speaker Out Jack (Black)

Usethisaudiojacktoconnectrearspeakersina7.1-channelaudioconguration.

Optical S/PDIF Out Connector

This connector provides digital audio out to an external audio system that supports digital optical audio.

Before using this feature, ensure that your audio system provides an optical digital audio in connector.

Line In Jack (Blue)

The default line in jack. Use this audio jack for line in devices such as an optical drive, walkman, etc.

Line Out Jack (Green)

The default line out jack. Use this audio jack for a headphone or 2-channel speaker. This jack can be

usedtoconnectfrontspeakersina4/5.1/7.1-channelaudioconguration.

Mic In Jack (Pink)

The default Mic in jack. Microphones must be connected to this jack.

Serial Port

Connects to serial-based mouse or data processing devices.

Link

Activity LED

Speed LED

10/100/1000 LAN Port

Speed LED:

State Description

Yellow On 1 Gbps data rate

Green On 100 Mbps data rate

Off 10 Mbps data rate

Link/Activity LED:

State Description

On Link between system and networ k or no

access

Blinking Data transmission or receiving is occurring

Off No data transmission or receiving is occurring

• Whenremovingthecableconnectedtoabackpanelconnector,rstremovethecablefromyour

device and then remove it from the motherboard.

• When removing the cable, pull it straight out from the connector. Do not rock it side to side to

prevent an electrical short inside the cable connector.

Page is loading ...

Gigabyte MW50-SV0 User manual

Related papers

Other documents