2. Breezesta
  3. Round Counter Table

Breezesta Round Counter Table Assembly Instructions

  • Hello! I've reviewed the user manual for the BREEZESTA 36" Round Counter Table, model CH-0808. This document outlines the assembly process, from attaching the side assemblies to the spreaders to securing the table top with screws and Ell Brackets. I’m ready to assist you with any questions you might have about assembling your new table.
  • How do I attach the Side Assemblies to the Spreaders?
    How do I attach the table top to the base?
    Where should I place the Ell Brackets?
Attach Side Assemblies to Spreaders by placing the
tenon into the mortise (pocket) and attching with
screws (A) as shown.
K
Ver 13.1
Place the table top on the base so that the Aluminum Rails on
the table top fit within the base as shown above. Place Ell
Brackets (D) in the corners, as shown.
Attach table top to base using uncolored screws (B)
through the underside of the Ell Brackets (D), and to
legs using uncolored screws (C) through the side of the
Ell Brackets.
A-3"(20 pcs.)colored
B-7/8"(4pcs.)uncolored
D-Metal Ell Bracket (4 pcs.)
C-1.5"(4pcs.)uncolored
A
BASE SPREADER
SPREADERS
STEP 1
SIDE ASSEMBLIES
STEP 2
TABLE TOP
ALUMINUM RAILS
D
STEP 3
B & C
BREEZESTA tm
Recycled Poly Furniture
36" ROUND COUNTER TABLE
LIST OF PARTS
Side Assemblies (2)
Spreaders (4)
Base Spreader (1)
Table Top (1)
Colored Screws "A" (20)
Un-Colored Screws "B" (4)
Un-Colored Screws "C" (4)
Metal Ell Brackets "D" (4)
Insert Bit Tool (1)
CH-0808
/