2. RC4WD
  3. Tough Armor Side Steel Sliders

RC4WD Tough Armor Side Steel Sliders User manual

  • Hello! I've reviewed the user manual for the Tough Armor Side Steel Sliders for the 1/18 Gelande II. The document provides detailed, step-by-step instructions with accompanying diagrams, explaining the process for installing the sliders. I'm ready to answer any questions you may have based on this document.
  • What tools are needed for installation?
    Are nuts needed for reattaching the upper links?
    How many bolts to remove in step 1?
Step 1. Step 2.
Step 3.
Using a 1.5mm hex driver and some needle nose
pliers, remove the 4 bolts that secure the upper
links to the chassis.
Reverse the direction of the screw and reattach
the upper links and sliders simultaneously. The
nuts are not needed.
Completed Assembly.
RC4WD 100-0045
Tough Armor Side Steel Sliders
for 1/18 Gelande II
/