Tyan S7053 User manual

S7053

Version 1.0

Copyright

this manual may be reproduced or translated without prior written consent from

MiTAC Computer Corp.

Trademark

All registered and unregistered trademarks and company names contained in

this manual are property of their respective owners including, but not limited to

the following.

TYAN

®

is a trademark of MiTAC Computer Corporation

Intel

®

is a trademark of Intel

®

Corporation.

AMI

®

, AMIBIOS

®

and combinations thereof are trademarks of AMI Technologies.

Microsoft

®

, Windows

®

are trademarks of Microsoft Corporation.

Aspeed

®

is a trademark of Aspeed Technology Inc.

Notice

Information contained in this document is furnished by MiTAC Computer

Corporation and has been reviewed for accuracy and reliability prior to printing.

MiTAC assumes no liability whatsoever, and disclaims any express or implied

warranty, relating to sale and/or use of TYAN

®

products including liability or

warranties relating to fitness for a particular purpose or merchantability. MiTAC

retains the right to make changes to product descriptions and/or specifications

at any time, without notice. In no event will MiTAC be held liable for any direct

or indirect, incidental or consequential damage, loss of use, loss of data or other

malady resulting from errors or inaccuracies of information contained in this

document.

http://www.TYAN.com

2

About this guide

This user guide contains the information you need when installing and configuring

the motherboard.

How this guide is organized

This guide contains the following parts:

Chapter1: Instruction

This chapter describes the features of the motherboard and the new technology it

supports.

Chapter2: Board Installation

This chapter lists the hardware setup procedures that you need to abide by when

installing system components. It includes description of the jumpers and connectors

on the motherboard.

Chapter3: BIOS Setup

This chapter tells how to change system settings through the BIOS setup menu.

Detailed descriptions of the BIOS parameters are also provided.

Chapter4: Diagnostics

This chapter introduces some BIOS codes and technical terms to provide better

service for the customers.

http://www.TYAN.com

3

Contents

Before you begin… ..............................................................................4

1.1 - Congratulations ............................................................................................. 5

1.2 - Hardware Specifications................................................................................ 5

1.3 - Software Specifications ............................................................................... 14

1.4 - AST2300 User Guide .................................................................................. 14

Chapter 2: Board Installation ............................................................15

2.1 - Board Image................................................................................................ 16

2.2 - Block Diagram ............................................................................................. 17

2.3 - Board Parts, Jumpers and Connectors........................................................ 18

2.4 - Installing the Processor ............................................................................... 31

2.5 - Installing the Heatsink ................................................................................. 34

2.6 - Thermal Interface Material........................................................................... 35

2.7 - Tips on Installing Motherboard in Chassis................................................... 36

2.8 - Installing the Memory .................................................................................. 38

2.9 - Attaching Drive Cables ................................................................................ 43

2.10 - Installing Add-In Cards .............................................................................. 44

2.11 - Connecting External Devices .................................................................... 45

2.12- Installing the Power Supply ........................................................................ 46

2.13 - Finishing Up .............................................................................................. 47

Chapter 3: BIOS Setup.......................................................................49

3.1 - About the BIOS............................................................................................ 49

3.2 - Setup Basics ............................................................................................... 49

3.3 - Getting Help ................................................................................................ 50

3.4 - In Case of Problems .................................................................................... 50

3.5 - BIOS Main Menu ......................................................................................... 51

3.6 - BIOS Advanced Menu ................................................................................. 53

3.7 - Chipset Menu .............................................................................................. 77

3.8 - Boot Configuration....................................................................................... 91

3.9 - Security Menu.............................................................................................. 92

3.10 - Server Mgmt Menu .................................................................................... 93

3.11 - Save & Exit Menu...................................................................................... 96

Chapter 4: Diagnostics ...................................................................... 99

4.1 - Flash Utility.................................................................................................. 99

4.2 AMIBIOS Post Code (Aptio) ...................................................................... 100

Appendix: Fan and Temp Sensors ................................................. 108

Glossary............................................................................................111

Technical Support............................................................................ 117

http://www.TYAN.com

4

Before you begin…

Check the box contents!

The retail motherboard package should contain the following:

Item Name P/N Number Description

5411T4630004

TF-MB;SBU,S7053,

S7053WGM4NR/MB,R1.0,TYAN

5411T4630005

TF-MB;SBU,S7053,

S7053GM2NR/MB,R1.0,TYAN

1x S7053

Motherboard

5411T4630006

TF-MB;SBU,S7053,

S7053WGM2NR/MB,R1.0,TYAN

6x Serial ATA

Cable

422736300010

TF-CABLE ASSY;SBU,SATA-

500MM,S2865

1x USB 2.0

Cable

422736300007

TF-CABLE ASSY;SBU,USB

CONN,2 PORT,S2865

1x I/O shield

341T44000001

TF-I/O

SHIELDING;SBU,SUS,50012-

6AP,S5512

1x S7053 User’s

manual

5615T4630001

TF-MANUAL;SBU,V1.0,USER

MANUAL, D2171-100,S7053

1x S7053 Quick

reference guide

5618T4630001

TF-SINGLE

PAGE;SBU,V1.0,QUICK

REFERENCE, D2172-100,S7053

1x TYAN

®

Driver

CD

5651T4390001

TFSOFTWARE;SBU,TYAN Driver

CD FOR INTEL C200 Series

If any of these items are missing, please contact your vendor/dealer for

replacement before continuing with the installation process.

http://www.TYAN.com

5

Chapter 1: Instruction

1.1 - Congratulations

You have purchased the powerful TYAN

®

S7053 motherboard, based on the

Intel

®

Patsburg-A (PCH), ASPEED AST2300, NUVOTON Super I/O NCT5577D

chipsets. The S7053 is designed to support dual Intel

®

E5-2600 (LGA2011)

Series Processors and up to 128GB UDIMM of 800,1066,1333 and1600MHz

DDR3 memory modules. Leveraging advanced technology from AMD

®

, the

S7053 is capable of offering scalable 32 and 64-bit computing, high-bandwidth

memory design, and lightning-fast PCI-E bus implementation.

The S7053 not only empowers you in today’s demanding IT environment but also

offers a smooth path for future application upgradeability. All of these rich feature

sets provides the S7053 with the power and flexibility to meet demanding

requirements for today’s IT environments.

The TYAN S7053 series is designed around several different configurations which

are detailed in the following 1.2 Hardware Specification section:

1.2 - Hardware Specifications

TYAN S7053 (S7053GM2NR)

Supported CPU

Series

Intel Xeon Processor E5-2600 Series

Socket Type / Q'ty LGA2011 / (2)

Thermal Design

Power (TDP)

wattage

150W

Processor

System Bus

Up to 8.0/ 7.2/ 6.4 GT/s with Intel QuickPath

Interconnect (QPI) support

Chipset PCH Intel C602

Supported DIMM

Qty

(8)+(8) DIMM slots

DIMM Type / Speed

DDR3/DDR3L 800 / 1066 / 1333 / 1600 RDIMM,

800 / 1066 / 1333 UDIMM / LRDIMM / Support

DDR3 Unbuffered and Register ECC

Capacity

up to 128GB UDIMM / 256GB RDIMM / 512GB

LRDIMM

Memory channel

4 Channels per CPU / Support 2 R/LR-DIMMs or 2

UDIMMs per channel

Memory

Memory voltage 1.5V or 1.35V

Expansion Slots PCI-E

(4) PCI-E x8 slots ( x8 link, slot #6, #5, #3, #1) / (2)

PCI-E x16 slots ( x16 link, slot #4, #2)

http://www.TYAN.com

6

Recommended

Barebone /

Chassis

Mechanical

Compliant

KFT48 / KTN70A

Port Q'ty (2) GbE ports

LAN

Controller Intel I350-AM2

Connector (10) SATA; (2) 6G + (8) 3G

Controller Intel C602

Speed

(2) 6.0 Gb/s (blue color), (4) 3.0 Gb/s (black color)

+ (4) 3.0 Gb/s (mini-SAS connector)

Storage SATA

RAID RAID 0/1/10/5 (Intel RST)

Connector type D-Sub 15-pin

Resolution Up to 1920x1200

Graphic

Chipset Aspeed AST2300

Chipset Infineon SLB9635 (Optional)

TPM

Version TPM v1.2

USB

(5) USB2.0 ports (2 stack-up ports, 1 type A

header)

COM

(1) DB-9 COM Connector (at rear, COM1) + (1)

Header (COM2)

VGA (1) D-Sub 15-pin VGA port

RJ-45 (2) GbE ports

Power SSI 24-pin + 8-pin + 8-pin power connectors

Front Panel (1) 2x12-pin SSI front panel header

Input /Output

SATA

(4) SATA-II , (2) SATA-III connectors, and (1) Mini-

SAS (4-in-1) connector

Chipset Aspeed AST2300

Voltage

Monitors voltage for CPU, memory, chipset &

power supply

Fan Total (7) 4-pin headers

System

Monitoring

Temperature

Monitors temperature for CPU & system

environment

Onboard Chipset Onboard Aspeed AST2300

AST2300 IPMI

Feature

IPMI 2.0 compliant baseboard management

controller (BMC) / Supports storage over IP and

remote platform-flash / USB 2.0 virtual hub

Server

Management

AST2300 iKVM

Feature

24-bit high quality video compression / Dual

10/100 Mb/s MAC interfaces

Brand / ROM size AMI / 8MB

BIOS

Feature

Plug and Play (PnP) /PCI2.3 /WfM2.0 /SMBIOS2.3

/PXE boot / ACPI 2.0 power management /Power

on mode after power recovery / User-configurable

H/W monitoring / Auto-configurable of hard disk

types

Form Factor SSI EEB

Physical

Dimension

Board Dimension 12"x13" (305x330mm)

http://www.TYAN.com

7

Operating System OS supported list Please refer to our OS supported list.

FCC (DoC) Class B

Regulation

CE (DoC) Yes

Operating Temp. 10° C ~ 35° C (50° F~ 95° F)

Non-operating

Temp.

- 40° C ~ 70° C (-40° F ~ 158° F)

Operating

Environment

In/Non-operating

Humidity

90%, non-condensing at 35° C

RoHS RoHS 6/6 Compliant Yes

Motherboard (1) S7053 Motherboard

Manual (1) User's manual / (1) Quick Ref. Guide

Installation CD (1) TYAN installation CD

I/O Shield (1) I/O Shield

Package Contains

Cable SATA (6) SATA signal cables

TYAN S7053 (S7053WGM2NR)

Supported CPU

Series

Intel Xeon Processor E5-2600 Series

Socket Type / Q'ty LGA2011 / (2)

Thermal Design

Power (TDP)

wattage

150W

Processor

System Bus

Up to 8.0/ 7.2/ 6.4 GT/s with Intel QuickPath

Interconnect (QPI) support

Chipset PCH Intel C602

Supported DIMM

Qty

(8)+(8) DIMM slots

DIMM Type / Speed

DDR3/DDR3L 800 / 1066 / 1333 / 1600 RDIMM,

800 / 1066 / 1333 UDIMM / LRDIMM / Support

DDR3 Unbuffered and Register ECC

Capacity

up to 128GB UDIMM / 256GB RDIMM / 512GB

LRDIMM

Memory channel

4 Channels per CPU / Support 2 R/LR-DIMMs or 2

UDIMMs per channel

Memory

Memory voltage 1.5V or 1.35V

Expansion Slots PCI-E

(4) PCI-E x8 slots ( x8 link, slot #6, #5, #3, #1) / (2)

PCI-E x16 slots ( x16 link, slot #4, #2)

Recommended

Barebone /

Chassis

Mechanical

Compliant

KFT48 / KTN70A

Port Q'ty (2) GbE ports

LAN

Controller Intel I350-AM2

Connector (2) Mini-SAS connectors (totally support 8 ports)

Storage SAS

Controller LSI SAS2308

http://www.TYAN.com

8

Speed 6.0 Gb/s

RAID RAID 0/1/10/5/XOR

Connector (10) SATA; (2) 6G + (8) 3G

Controller Intel C602

Speed

(2) 6.0 Gb/s (blue color), (4) 3.0 Gb/s (black color)

+ (4) 3.0 Gb/s (mini-SAS connector)

SATA

RAID RAID 0/1/10/5 (Intel RST)

Connector type D-Sub 15-pin

Resolution Up to 1920x1200

Graphic

Chipset Aspeed AST2300

Chipset Infineon SLB9635 (Optional)

TPM

Version TPM v1.2

USB

(5) USB2.0 ports (2 stack-up ports, 1 type A

header)

COM

(1) DB-9 COM Connector (at rear, COM1) + (1)

Header (COM2)

SAS (2) Mini-SAS (4-in-1) connectors

VGA (1) D-Sub 15-pin VGA port

RJ-45 (2) GbE ports

Power SSI 24-pin + 8-pin + 8-pin power connectors

Front Panel (1) 2x12-pin SSI front panel header

Input /Output

SATA

(4) SATA-II , (2) SATA-III connectors, and (1) Mini-

SAS (4-in-1) connector

Chipset Aspeed AST2300

Voltage

Monitors voltage for CPU, memory, chipset &

power supply

Fan Total (7) 4-pin headers

System

Monitoring

Temperature

Monitors temperature for CPU & system

environment

Onboard Chipset Onboard Aspeed AST2300

AST2300 IPMI

Feature

IPMI 2.0 compliant baseboard management

controller (BMC) / Supports storage over IP and

remote platform-flash / USB 2.0 virtual hub

Server

Management

AST2300 iKVM

Feature

24-bit high quality video compression / 10/100

Mb/s MAC interface

Brand / ROM size AMI / 8MB

BIOS

Feature

Plug and Play (PnP) /PCI2.3 /WfM2.0 /SMBIOS2.3

/PXE boot / ACPI 2.0 power management /Power

on mode after power recovery / User-configurable

H/W monitoring / Auto-configurable of hard disk

types

Form Factor SSI EEB

Physical

Dimension

Board Dimension 12"x13" (305x330mm)

Operating System OS supported list Please refer to our OS supported list.

http://www.TYAN.com

9

FCC (DoC) Class B

Regulation

CE (DoC) Yes

Operating Temp. 10° C ~ 35° C (50° F~ 95° F)

Non-operating

Temp.

- 40° C ~ 70° C (-40° F ~ 158° F)

Operating

Environment

In/Non-operating

Humidity

90%, non-condensing at 35° C

RoHS RoHS 6/6 Compliant Yes

Motherboard (1) S7053 Motherboard

Manual (1) User's manual / (1) Quick Ref. Guide

Installation CD (1) TYAN installation CD

I/O Shield (1) I/O Shield

Package Contains

Cable SATA

(2) SATA signal cables / (1) Mini-SAS cable to 4 x

SATA cables

TYAN S7053 (S7053GM4NR)

Supported CPU

Series

Intel Xeon Processor E5-2600 Series

Socket Type / Q'ty LGA2011 / (2)

Thermal Design

Power (TDP)

wattage

150W

Processor

System Bus

Up to 8.0/ 7.2/ 6.4 GT/s with Intel QuickPath

Interconnect (QPI) support

Chipset PCH Intel C602

Supported DIMM

Qty

(8)+(8) DIMM slots

DIMM Type / Speed

DDR3/DDR3L 800 / 1066 / 1333 / 1600 RDIMM,

800 / 1066 / 1333 UDIMM / LRDIMM / Support

DDR3 Unbuffered and Register ECC

Capacity

up to 128GB UDIMM / 256GB RDIMM / 512GB

LRDIMM

Memory channel

4 Channels per CPU / Support 2 R/LR-DIMMs or 2

UDIMMs per channel

Memory

Memory voltage 1.5V or 1.35V

Expansion Slots PCI-E

(4) PCI-E x8 slots ( x8 link, slot #6, #5, #3, #1) / (2)

PCI-E x16 slots ( x16 link, slot #4, #2)

Recommended

Barebone /

Chassis

Mechanical

Compliant

KFT48 / KTN70A

Port Q'ty (4) GbE ports

LAN

Controller Intel I350-AM4

Connector (10) SATA; (2) 6G + (8) 3G

Storage SATA

Controller Intel C602

http://www.TYAN.com

10

Speed

(2) 6.0 Gb/s (blue color), (4) 3.0 Gb/s (black color)

+ (4) 3.0 Gb/s (mini-SAS connector)

RAID RAID 0/1/10/5 (Intel RST)

Connector type D-Sub 15-pin

Resolution Up to 1920x1200

Graphic

Chipset Aspeed AST2300

Chipset Infineon SLB9635 (Optional)

TPM

Version TPM v1.2

USB

(5) USB2.0 ports (2 stack-up ports, 1 type A

header)

COM

(1) DB-9 COM Connector (at rear, COM1) + (1)

Header (COM2)

VGA (1) D-Sub 15-pin VGA port

RJ-45 (4) GbE ports

Power SSI 24-pin + 8-pin + 8-pin power connectors

Front Panel (1) 2x12-pin SSI front panel header

Input /Output

SATA

(4) SATA-II , (2) SATA-III connectors, and (1) Mini-

SAS (4-in-1) connector

Chipset Aspeed AST2300

Voltage

Monitors voltage for CPU, memory, chipset &

power supply

Fan Total (7) 4-pin headers

System

Monitoring

Temperature

Monitors temperature for CPU & system

environment

Onboard Chipset Onboard Aspeed AST2300

AST2300 IPMI

Feature

IPMI 2.0 compliant baseboard management

controller (BMC) / Supports storage over IP and

remote platform-flash / USB 2.0 virtual hub

Server

Management

AST2300 iKVM

Feature

24-bit high quality video compression / 10/100

Mb/s MAC interface

Brand / ROM size AMI / 8MB

BIOS

Feature

Plug and Play (PnP) /PCI2.3 /WfM2.0 /SMBIOS2.3

/PXE boot / ACPI 2.0 power management /Power

on mode after power recovery / User-configurable

H/W monitoring / Auto-configurable of hard disk

types

Form Factor SSI EEB

Physical

Dimension

Board Dimension 12"x13" (305x330mm)

Operating System OS supported list Please refer to our OS supported list.

FCC (DoC) Class B

Regulation

CE (DoC) Yes

Operating Temp. 10° C ~ 35° C (50° F~ 95° F)

Operating

Environment

Non-operating

Temp.

- 40° C ~ 70° C (-40° F ~ 158° F)

http://www.TYAN.com

11

In/Non-operating

Humidity

90%, non-condensing at 35° C

RoHS RoHS 6/6 Compliant Yes

Motherboard (1) S7053 Motherboard

Manual (1) User's manual / (1) Quick Ref. Guide

Installation CD (1) TYAN installation CD

I/O Shield (1) I/O Shield

Package Contains

Cable SATA (6) SATA signal cables

TYAN S7053 (S7053WGM4NR)

Supported CPU

Series

Intel Xeon Processor E5-2600 Series

Socket Type / Q'ty LGA2011 / (2)

Thermal Design

Power (TDP)

wattage

150W

Processor

System Bus

Up to 8.0/ 7.2/ 6.4 GT/s with Intel QuickPath

Interconnect (QPI) support

Chipset PCH Intel C602

Supported DIMM

Qty

(8)+(8) DIMM slots

DIMM Type / Speed

DDR3/DDR3L 800 / 1066 / 1333 / 1600 RDIMM,

800 / 1066 / 1333 UDIMM / LRDIMM / Support

DDR3 Unbuffered and Register ECC

Capacity

up to 128GB UDIMM / 256GB RDIMM / 512GB

LRDIMM

Memory channel

4 Channels per CPU / Support 2 R/LR-DIMMs or 2

UDIMMs per channel

Memory

Memory voltage 1.5V or 1.35V

Expansion Slots PCI-E

(4) PCI-E x8 slots ( x8 link, slot #6, #5, #3, #1) / (2)

PCI-E x16 slots ( x16 link, slot #4, #2)

Recommended

Barebone /

Chassis

Mechanical

Compliant

KFT48 / KTN70A

Port Q'ty (4) GbE ports

LAN

Controller Intel I350-AM4

Connector (2) Mini-SAS connectors (totally support 8 ports)

Controller LSI SAS2308

Speed 6.0 Gb/s

SAS

RAID RAID 0/1/10/5/XOR

Connector (10) SATA; (2) 6G + (8) 3G

Storage

SATA

Controller Intel C602

http://www.TYAN.com

12

Speed

(2) 6.0 Gb/s (blue color), (4) 3.0 Gb/s (black color)

+ (4) 3.0 Gb/s (mini-SAS connector)

RAID RAID 0/1/10/5 (Intel RST)

Connector type D-Sub 15-pin

Graphic

Chipset Aspeed AST2300

Chipset Infineon SLB9635 (Optional)

TPM

Version TPM v1.2

USB

(5) USB2.0 ports (2 stack-up ports, 1 type A

header)

COM

(1) DB-9 COM Connector (at rear, COM1) + (1)

Header (COM2)

SAS (2) Mini-SAS (4-in-1) connectors

VGA (1) D-Sub 15-pin VGA port

RJ-45 (4) GbE ports

Power SSI 24-pin + 8-pin + 8-pin power connectors

Front Panel (1) 2x12-pin SSI front panel header

Input /Output

SATA

(4) SATA-II , (2) SATA-III connectors, and (1) Mini-

SAS (4-in-1) connector

Chipset Aspeed AST2300

Voltage

Monitors voltage for CPU, memory, chipset &

power supply

Fan Total (7) 4-pin headers

System

Monitoring

Temperature

Monitors temperature for CPU & system

environment

Onboard Chipset Onboard Aspeed AST2300

AST2300 IPMI

Feature

IPMI 2.0 compliant baseboard management

controller (BMC) / Supports storage over IP and

remote platform-flash / USB 2.0 virtual hub

Server

Management

AST2300 iKVM

Feature

24-bit high quality video compression / 10/100

Mb/s MAC interface

Brand / ROM size AMI / 8MB

BIOS

Feature

Plug and Play (PnP) /PCI2.3 /WfM2.0 /SMBIOS2.3

/PXE boot / ACPI 2.0 power management /Power

on mode after power recovery / User-configurable

H/W monitoring / Auto-configurable of hard disk

types

Form Factor SSI EEB

Physical

Dimension

Board Dimension 12"x13" (305x330mm)

Operating System OS supported list Please refer to our OS supported list.

FCC (DoC) Class B

Regulation

CE (DoC) Yes

Operating Temp. 10° C ~ 35° C (50° F~ 95° F)

Operating

Environment

Non-operating

Temp.

- 40° C ~ 70° C (-40° F ~ 158° F)

http://www.TYAN.com

13

In/Non-operating

Humidity

90%, non-condensing at 35° C

RoHS RoHS 6/6 Compliant Yes

Motherboard (1) S7053 Motherboard

Manual (1) User's manual / (1) Quick Ref. Guide

Installation CD (1) TYAN installation CD

I/O Shield (1) I/O Shield

Package Contains

Cable SATA

(2) SATA signal cables / (1) Mini-SAS cable to 4 x

SATA cables

http://www.TYAN.com

14

S7053 SKU Comparison Table

Model BMC PCH

Expand.slot

X16/x8

LSI

SAS

6Gb/s

Intel

SAS

Raid

SATA

6Gb/s

SATA

3Gb/s

1G

LAN

S7053GM2NR Yes Pasburg-A 2/4 0 NO 6 4 2

S7053WGM2NR Yes

Pasburg-A

LSI SAS 2308

2/4 8 NO 6 4

2

S7053GM4NR Yes Pasburg-A 2/4 0 NO 6 4 4

S7053WGM4NR Yes

Pasburg-A

LSI SAS 2308

2/4 8 NO 6 4 4

S7053GM4NR2

[BTO]

Yes

Pasburg-

A+ROM2

2/4 0

0/0/1

0/5

2 4 4

Model USB3.0 Audio TPM

S7053GM2NR 0 No No

S7053WGM2NR 0 No No

S7053GM4NR 0 No No

S7053WGM4NR 0 No No

S7053GM4NR2

[BTO]

0 No No

Remember to visit TYAN

®

’s Website at http://www.TYAN.com. There you

can find information on all of TYAN

®

’s products with FAQs, online manuals

and BIOS upgrades and more.

1.3 - Software Specifications

For OS (operation system) support, please check the TYAN

®

website for the

latest information.

1.4 - AST2300 User Guide

Remember to visit TYAN

®

’s Website at http://www.TYAN.com for AST2300

user guide.

http://www.TYAN.com

15

Chapter 2: Board Installation

You are now ready to install your motherboard.

How to install our products right… the first time

The first thing you should do is reading this user’s manual. It contains important

information that will make configuration and setup much easier. Here are some

precautions you should take when installing your motherboard:

(1) Ground yourself properly before removing your motherboard from the

antistatic bag. Unplug the power from your computer power supply and then

touch a safely grounded object to release static charge (i.e. power supply

case). For the safest conditions, TYAN

®

recommends wearing a static safety

wrist strap.

(2) Hold the motherboard by its edges and do not touch the bottom of the board,

or flex the board in any way.

(3) Avoid touching the motherboard components, IC chips, connectors, memory

modules, and leads.

(4) Place the motherboard on a grounded antistatic surface or on the antistatic

bag that the board was shipped in.

(5) Inspect the board for damage.

The following pages include details on how to install your motherboard into your

chassis, as well as installing the processor, memory, disk drives and cables.

Caution!

1. To avoid damaging the motherboard and associated

components, do not use torque force greater than

7kgf/cm (6.09 lb/in) on each mounting screw for

motherboard installation.

2. Do not apply power to the board if it has been

damaged.

http://www.TYAN.com

16

2.1 - Board Image

S7053

This diagram is representative of the latest motherboard revision available at the

time of publishing. The board you receive may not look exactly like the above

diagram.

http://www.TYAN.com

17

2.2 - Block Diagram

S7053

http://www.TYAN.com

18

2.3 - Board Parts, Jumpers and Connectors

Important Notes to the User

• "▲" indicates the location of "Pin 1".

• The diagram is representative of the latest board revision available at the time of

publishing. The board you received may not look exactly like this diagram.

http://www.TYAN.com

19

Jumpers & Connectors

Jumper/Connector Function

SYS FAN1~5/CPU0~1FAN 4-pin Fan connector

FAN_HDR1 System Fan Header

SW1 ID_LED Button

J3 COM2 Header

IPMB_1 IPMB Pin Header

PSMI 1 PSMI Connector

FPIO_1 Front Panel Header

A_USB1 TYPE-A USB From PCH

USB1/ USB2 Front USB Header

Clear BTN1 RTC reset button

2PHD_1 INTRUDER header

2PHD_2 / 2PHD_3 Powerville LED Pin Header

2PHD_4 ID LED Pin Header

2PHD_5 BMC RST header

3PHD_4 ME RECOVERY MODE Jump

3PHD_5 BIOS RECOVERY MODE Jump

3PHD_6/7 COM Select

Jumper Legend

OPEN - Jumper OFF

Without jumper cover

CLOSED - Jumper ON

With jumper cover

http://www.TYAN.com

20

Jumper Placement

SYS FAN1~5/CPU0~1FAN : 4-Pin FAN Connector

Pin 1 2 3 4

Signal

GND P12V FAN_TACH FAN_PWM

NOTE:

Use this header to connect the cooling fan to your

motherboard to keep the system stable and reliable.

SYS

_

FAN2

CPU0

_

FAN

SYS

_

FAN1

SYS

_

FAN4

CPU1

_

FAN

SYS

_

FAN3

SYS

_

FAN5

FAN

_

HDR1

J3 J3

Page is loading ...

Tyan S7053 User manual

Tyan S7053 User manual

Related papers

Other documents