YoLuke 5823873099 User manual

Wi-Fi IP CAMERA

QUICK OPERATION GUIDE

Apply for Model: BC5 /P1-4X /P3-4X/ P2-20X

Note: Due to the continuous updating of the product and software, there may be a discrepancy between

the operating guide and the APP interface. All the instructions are subject to the actual operation

interface.

Contents

Wi-Fi IP CAMERA

...................................................................................................................

1

1. Introduction

......................................................................................................................

1

2. Connection and Installation

.......................................................................................

2

2.1 Connection Diagram

...................................................................................................

2

2.2 Installation

...............................................................................................................

2

2.3 SD Card Slot

...............................................................................................................

4

3. App CamHipro Installation

...........................................................................................

5

4. View Video by App

...........................................................................................................

6

4.1 Connect Wi-Fi Camera by Camera’s Wi-Fi Hotspot

........................................

6

4.1.1 Connect Wi-Fi (Hot Spot)

...........................................................................

6

4.1.2 Add camera to CamHipro

...............................................................................

7

4.1.3 Connect the camera to Wi-Fi

.....................................................................

9

4.2 Connect the Camera by Scan QR Code

...............................................................

10

4.3 Connect the Camera by Search Nearby Devices

.............................................

11

4.4 APP Function Introduction

.................................................................................

12

4.4.1 APP login display interface introduction

........................................

12

4.4.1.1 Video playback

...................................................................................

12

4.4.1.2 Video and image download

..............................................................

13

4.4.1.3 Local files, device list and add other new camera

............

13

4.4.1.4 Pre-set point and auto cruise(for PTZ)

..................................

14

4.4.2 APP Setting Function

.................................................................................

15

4.4.2.1 Wireless setting

..............................................................................

15

4.4.2.2 Change password

.................................................................................

15

4.4.2.3 Alarm management and notification

............................................

16

4.4.2.4 Video setting and audio setting

................................................

18

4.4.2.5 SD card plan recording

..................................................................

18

4.4.2.6 SD card setting

.................................................................................

19

4.4.2.7 Device time setting

........................................................................

19

4.4.2.8 Default setting

.................................................................................

20

4.4.2.9 Device information

..........................................................................

20

5. Computer Browsing Access

...........................................................................................

21

5.1 Download Search Tool

.............................................................................................

21

5.2 Search IP Camera

.....................................................................................................

21

5.3 View Video by Browser

...........................................................................................

22

5.4 Preview Interface

...................................................................................................

22

5.5 Parameter Settings

.................................................................................................

24

5.5.1 Setting



Media

................................................................................................

24

5.5.2 Setting



Network

............................................................................................

26

5.5.3 Setting



Alarm

................................................................................................

28

5.5.4 Setting



Advanced

....................................................................................

30

5.5.5 Settings



System

........................................................................................

34

6. Video Management Software (P2P Client)

..............................................................

36

6.1 Software Installation

...........................................................................................

36

6.2 Add Camera

.................................................................................................................

37

6.3 Software Function Introduce

..............................................................................

39

Frequently Asked Questions

.............................................................................................

46

Service Guarantee

................................................................................................................

49

1

1. Introduction

Thanks for buying YoLuke Wi-Fi IP Camera. We provide 4 different cameras

which has different appearance and function. We follow the people-oriented design

philosophy, these four cameras will be easily able to integrate into our daily lives,

both in terms of appearance and function. This manual describes all the parameters,

functional structure, how to use, common problems and solutions for the camera in

detail. This would help you know the camera quickly and use it easily.

Camera Introduce



Wi-Fi Cameras Come with H.265 and 2MP/ 1080P FULL HD VIDEO QUALITY



Wi-Fi One Key Setting: You can setup all functions by Mobile App



Camera Support Wi-Fi, 802.11b/g/n, 150Mbps



With SD Card Slot, Max Support 128GB for Auto Recording



Audio I/O



SONY Image CMOS Sensor

2

2. Connection and Installation

2.1 Connection Diagram

2.2 Installation

BC5

3

P1-4X

P2-20X/P3-4X

4

2.3 SD Card Slot

BC 5 P3-4X

P1-4X P2-20X

5

3. App CamHipro Installation

Download App “CamHipro” from Google Play or Apple Store, or Scan

below QR Code to install.

6

4. View Video by App

Three ways to connect camera by Wi-Fi.

4.1 Connect Wi-Fi Camera by Camera’s Wi-Fi Hotspot

Connect camera with power supply

Power on Wi-Fi Camera by Power adapter 12V1A(BC5) / 12V2A(P1-4X) / 12V3A(P2-20X), camera will turn

into the self-test mode. It will take about 15 seconds.

4.1.1 Connect Wi-Fi (Hot Spot)

Your cell phone’s Wi-Fi Setting -- search Wi-Fi signals -- connect the Wi-Fi.

The name of Wi-Fi t is the UID on the camera (UID:TTTT-900139-DUFRR; Wi-Fi name:IPCAM-900139)

Password: 01234567

Remark: Camera’s Wi-Fi Hot spot only 3-5meters

7

4.1.2 Add camera to CamHipro

A) Open App CamHipro -- Click Add device -- Web video camera

B) New device -- Yes.I want to add this device -- Add to

8

C) Not configured yet, add directly -- Confirm skip-- Set up a name -- Confirm

D) Click the camera that has been added to the device list to preview the real-time monitoring

screen.

Online means you added the camera successfully

9

4.1.3 Connect the camera to Wi-Fi

A) Click go to Setting page -- Wirless setting -- Get the wireless network around the device--

Select your Router’s Wi-Fi and enter the password.

Wait 20-30 seconds, Wi-Fi connection success.

B) Back to Camera device list, camera displayed online. Click camera for real-time preview.

C) NOTE: ①.Setup Wi-Fi should restart App. Please restart exit App.

②. After the camera connect to Wi-Fi, you cannot search the hot spot of the camera.

10

4.2 Connect the Camera by Scan QR Code

A) Power on Wi-Fi Camera by Power adapter 12V1A(BC5) / 12V2A(P1-4X) / 12V3A(P2-20X) and camera

will turn into the self-test mode. It will take about 15 seconds. Please make sure that the camera has

connected to your router’s Wi-Fi. (Guidance can be found in 4.1.4)

B) Device in use-- Scan QR code-- scan the QR code on the camera

C) After scanning , the UID number will be written automatically. Click “Confirm add” to back to

Camera device list. Camera displayed online. Click camera for real-time preview.

11

4.3 Connect the Camera by Search Nearby Devices

A)

①Power on the Wi-Fi Camera by Power adapter

②Please make sure that the camera has been connected to router’s Wi-Fi. (Guidance can be found in 4.1.4)

③Please make sure that your cell phone connects the same Wi-Fi as the camera connected.

B) Device in use -- Search nearby devices -- Click the device in the device List -- Confirm add

If there is no camera on the device list, please come close to the camera and refresh.

C) Go back to camera device list. Camera is displayed online, Click camera for real-time preview.

12

4.4 APP Function Introduction

4.4.1 APP login display interface introduction

4.4.1.1 Video playback

Click on this page, you can playback your video here.

There are two ways to playback your video -- choose Time playback or File playback.

13

4.4.1.2 Video and image download

Click to playback and download your video and images.

4.4.1.3 Local files, device list and add other new camera

Click to view the local file of different cameras.

；

click

to change the camera

device list；click to add a new camera.

14

4.4.1.4 Pre-set point and auto cruise(for PTZ)

Click the camera into real-time monitor -- turn to next page -- preset position

Number 1-16 means 16 points you want to set up

Adjust the camera rotation to the first point you want to monitor on the app; input "1" and Setting;

Adjust the camera rotation to the second point you want to monitor on the app; input "2" and Setting;

……until set up 16 points……

After you set up 16 points, input "41" and transfer. The camera will auto cruise.

Input "41" and Setting, auto cruise will stop.

There are 8 cruise lines can be set.

Cruise line

Number for setting

Number for auto cruise

Number for stop

the second cruise line

17-32

42 +transfer

42+ Setting

the third cruise line

65-80

43 +transfer

43 + Setting

the forth cruise line

113-128

44 +transfer

44 + Setting

the fifth cruise line

129-144

45 +transfer

45 + Setting

the sixth cruise line

146-160

46 +transfer

46 + Setting

the seventh cruise line

161-176

47 +transfer

47 + Setting

the eighth cruise line

177-192

48 +transfer

48 + Setting

15

4.4.2 APP Setting Function

Click go to camera set up page.

4.4.2.1 Wireless setting

Click “wireless setting” to connect the camera to your router Wi-Fi or change a Wi-Fi for the camera.

4.4.2.2 Change password

Click “Change Password” to modify the password. Old password :01234567

16

4.4.2.3 Alarm management and notification

4.4.2.3.1 Advanced setting

You can set up the time you want to alarm. If you don’t set up a specific time, it will alarm all day.

Advance setting-- choose one day-- set up the Start alarm time and End alarm time -- Add to

4.4.2.3.1 Detected area and sensitivity

Adjust motion detection-- drag to draw the area of screen--adjust the sensitivity--application

17

4.4.2.3.2 Email setting

Open Alarm capture sent to email --Configure Email -- write down all the information it needed--

application

4.4.2.3.3 FTP setting

Open alarm capture saved to FTP--Configure FTP-- write down the information it needed --open passive

mode --application after successfully test.

Page is loading ...

YoLuke 5823873099, P1-4X-3MP, P3-3MP-RWF, P3-5MP-RWF User manual

Other documents