Noble House 306687 Operating instructions

Type
Operating instructions
CAUTION: You must read this before you proceed.
RIGHT CHAIR
CAUTION : This Chair is NOT a TOY.
Keep your child / children at bay in the process of assembly.
For turning the Chair and to prevent damage to the Chair, 02
persons may be needed to execute this action.
Noble House Home Furnishings LLC
No. Qty
A
1
B
1
C
1
D
1
E
1
F
1
G
1
H
1
No. Qty
7
5
1
Picture
Right Arm Panel(With Pre-
installed Levellers)
Left Arm Panel(With Pre-
installed Levellers)
Seat Panel
Support Bar
Screw
(M6x45mm)
Bolt
(M6x35mm)
Backrest Panel
Right Back Cushion
DescriptionPicture
Description
Seat Cushion
Back Cushion
Allen Key
Noble House Home Furnishings LLC
This Right Chair has multiple parts and may require up to 30 minutes to assemble.
To give you an overview of the Right Chair parts, the above picture is to help you put
the various parts into perspective. Please read through the instructions herebelow to
familiarise the parts and steps before assembly.
Read instructions, cover to cover.
Have 2 adults on hand for assembly.
Do not assemble on flooring or carpet.
Assemble on a clean non-marring surface (packing foam).
Save all packaging until finished.
Before Beginning Assembly:
Right Back Cushion (H)
FRONT FACING
Backrest Panel (A)
Right Arm Panel (C)
OVERVIEW
Support Bar (E)
Left Arm Panel (B)
Seat Panel (D)
Back Cushion (G)
Seat Cushion (F)
Noble House Home Furnishings LLC
Step 1
Unpack and place all parts on a clean, non-marring surface.
Noble House Home Furnishings LLC
Step 2
Step 3
Place the Right Arm Panel (C) with inside face skywards onto a clean, soft surface
to avoid any scratches or damages to the product.
Step 2.1: Align the dowels of Support Bar (E) into the positions in the Right Arm
Panel (C) as shown above.
Then, affix Support Bar (E) with Right Arm Panel (C) by using Bolt () and Allen
Key ()
Step 2.2: Attach the Backrest Panel (A) onto Right Arm Panel (C) by using Bolts
(
) and Allen Key (
) as shown above.
DO NOT FULLY TIGHTHEN BOLTS.
Step 2.1
Step 2.2
Step 3.1
Step 3.2
Noble House Home Furnishings LLC
Place Left Arm Panel (B) onto the assembled frame from Step 2
Step 3.1: Align the dowels of Support Bar (E) into the positions in the Left Arm Panel
(B).
Then, affix Support Bar (E) with Left Arm Panel (B) by using Bolt () and Allen Key
().
Step 3.2: Attach the Left Arm Panel (B) onto Backrest Panel (A) by using Bolts ()
and Allen Key ().
DO NOT FULLY TIGHTHEN BOLTS.
Noble House Home Furnishings LLC
Step 4
Step 5
Inspect the Right Chair and make sure all parts are adequately connected.
In a sequential manner, tighten all Screws and Bolts at all joints.
With assistance from your adult partners, adjust the Levellers to desired height
to avoid wobbles.
Attach the Seat Panel (D) into the Right Chair as shown in picture above.
Affix Seat Panel (D) with Corner Chair by using Screws () and Allen Key ().
Note: Using Screws () from inside to outside of Seat Panel (D)
DO NOT FULLY TIGHTHEN SCREWS.
Adjust Pre-installed Levellers
height for balance
Noble House Home Furnishings LLC
Step 6
Turn the Right Chair right side up.
Place Seat Cushion (F), Left Back Cushion (G) and Right Back Cushion (H) to Seat
Panel (D).
Inspect it and make sure all parts are adequately connected.
Ensure all screws, bolts are fully locked into position and secured.
The Right Chair is ready to be used.
Caution: This Right Chair can only be used on a flat, level surface.
Noble House Home Furnishings LLC
Step 7
Note: This is optional step in case we want to connect all chairs in a set
together and should be done before placing cushion
With assistance from your adult partners, up side down the chairs and using pre-
fixed clip to connect the chairs together
Noble House Home Furnishings LLC
Noble House Home Furnishings LLC
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10

Noble House 306687 Operating instructions

Type
Operating instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI