Genesis Renew Installation and Use Manual

GENESIS|RENEW™

AUTOMATICWATERCHANGESYSTEM



INSTALLATIONANDUSE



 



CongratulationsonyourpurchaseoftheGENESIS|RENEW™AutomaticWaterChangeSystem!Pleasetakeafewmomentstoread

andfollowtheseinstallationinstructionssoyoucanfullyenjoyyournewsystemrightoutofthebox.Ifyouhaveanyquestionsat

all, please visit us at www.GenesisReefSystems.com,

or email us at Support@GenesisReefSystems.com.We are always happy to

hearfromourcustomers!



Thefollowingitemshavebeenshippedwithyoursystem:

(1)RENEW™ControlModule

(2)RENEW™MeteringReservoirs(ProSystemsinclude2LevelSensorsineachReservoir)

(2)RENEW™MeteringReservoirCovers

(2)BarbedBallValves

(1)Communicatio n CableforusewiththeGENESISSTORM™AutomaticTopOffSystem

(2)LevelSensorVerticalMembers(AdvancedandProSystemsonly)

(4)Level

SensorShrouds(AdvancedandProSystemsonly)

(2)StandaloneLevelSensors(AdvancedandProSystemsonly)

(4)5’Lengthsof1/2"Tubing(ProSystemonly)

(2)5’Lengthsof5/8”Tubing(ProSystemonly)

(4)SuctionCups(AdvancedandProSystemsonly)

(6)MountingScrews

(2)Pumps(Optional)

Installation

1. Findsuitablemountinglocations

 TheMeteringReservoirsmustbelocatedabovethehighestwaterlevelinthesump(oraquariumifyoudon’t

useasump)andthereplacementwaterbin,ataheightwheretheselectedpumpswillbeabletosupplyat

least1gallonofwater

perminute.TheMeteringReservoirsrarelyneedtobeaccessedafterinstallation,so

feelfreetotuckthemawaysomewherethatkeepsyourday‐to‐dayaquariumworkspaceclear.

 Remember–waterisheavy!TheMeteringReservoirsmustbesecurelymountedonaverticalsurfacethat

cansupporta

minimumof20poundsperbin.WhenmountingtheMeteringReservoirsonawall,ensurethat

themountingscrewswillbedrivenintowallstudsorusewallanchorsthatwillsupporttheweightofthebins.

 TheControlModulemustbelocatedinaneasilyaccessible,drylocationprotected

fromaccidentalsplashes.

 Thecordsandcontrolcablessuppliedareapproximately6feetinlength,andlevelsensorcablesare

approximately8feetinlength.EnsurethattheywillreachfromtheControlModuletotheirrespective

locationsbeforepermanentlymountingthecomponents.



2. MounttheMeteringReservoirs



Ensurenoelectricalwiresorplumbingresidebehindorwithinthemountingarea.Beverycarefulwhen

drillingordrivingscrewsintoablindmountinglocation!

 Usingthesuppliedtemplateasaguide,markanddrilltwopilotholesasindicated.Notethatalinedrawn

betweenthecenterpoints

ofthetwoholesmustbeperfectlyvertical.

 Insertwallanchorsifnecessary,followingalldirectionsprovidedwiththeanchors.

 Drivethemountingscrewsintotheholesoranchors,leavingabout1/8”inchbetweenthescrewheadandthe

mountingsurface.

 SliptheMeteringReservoirsontothescrews

andgentlypulldownabout1/2"untilfullyseated.Thereshould

beno“play”betweentheReservoirsandthemountingsurfacewhenproperlysecured.

o Tip:itisoftenconvenienttoinstalltubing,ballvalves,andReservoirCoverspriortomounting

theMeteringReservoirsonthescrews

 Repeatthese

stepsforthesecondMeteringReservoir



3. MounttheControlModule

 Ensurenoelectricalwiresorplumbingresidebehindorwithinthemountingarea.Beverycarefulwhen

drillingordrivingscrewsintoablindmountinglocation!

 Usingthesuppliedtemplateasaguide,markanddrilltwo

pilotholesasindicated.

 Insertwallanchorsifnecessary,followingalldirectionsprovidedwiththeanchors.

 Drivethemountingscrewsintotheholesoranchors,leavingjustlessthan3/8”inchbetweenthescrewhead

andthemountingsurface.

 SliptheControlModuleontothescrewsandgently

pulldownabout1/2"untilfullyseated.Thereshouldbe

no“play”betweentheControlModuleandthemountingsurfacewhenproperlysecured.



4. MounttheLevelSensors(AdvancedandPromodelsorpurchasedseparately)

 TheLevelSensorShroudsaredesignedsuchthattheycanbeusedinmany

differentconfigurations.

o LevelSensorscanbeinstalledinside,above,orbelowtheshrouds

o TheShroudCovercanbeinsertedontotherearoftheShroudtocreateahangerthatis

adjustablefortanklipwidthsasnarrowas1/2"oraswideas2‐1/4”

o The

shroudscanbeleftopenorcanbeclosedtopreventcrittersorwaterturbulencefrom

affectingthesensors’performance

o Theshroudswillslideontoandsecurethemselvesonanystandard1/2"PVCpipe,allowingthem

tobepositionedatanyheight

o Theshroudscanbehungfromone

anotherusingtheT‐shapedtabsandslotsonthesides,

allowingmultiplesensorstobepositionedonasingleverticalmemberatslightlydifferent

heights.

o LevelSensorwirescanbedressedthroughtheverticalmemberorPVCpipetogiveacleanlook

toyourinstallation

 Using

theLevelSensortopreventapumprun‐dryscenario:

o InstalloneShroudCoverontotherearofoneShroud

o Insertaverticalmemberor1/2"PVCpipethroughtheassembledShroudsuchthattheShroud

Coveractsasaliphanger

o InstalloneLevelSensorinsidea

secondShroudbylooseningtheplasticnutonthesensorand

slidingthesensorintothewidenotchintheShroud

o Inserttheotherendoftheverticalmemberor1/2"PVCpipeintotheShroudwiththesensor

suchthattheLevelSensor’scordwillcomeoutof

theTOPoftheShroudwhenhungonthetank.

o RemoveanypackingfoamortapefromtheLevelSensor

o PlacetheremainingShroudCoverontothelowerShroudtoprotecttheLevelSensorifdesired

o InstallSuctionCupsontothelowerShroudifdesired

o Hangthe

assemblyoverthelipofthetankandadjustthehangerwidth

o AdjusttheheightoftheShroud/Sensortotheminimumdesiredwaterlevel

o SecureSuctionCupstothetankwall

 UsingtheLevelSensortopreventanoverflowscenario:

o InstalloneShroudCoverontotherearofoneShroud

o Insertaverticalmemberor1/2"PVCpipethroughtheassembledShroudsuchthattheShroud

Coveractsasalip

hanger

o InstalloneLevelSensorinsideasecondShroudbylooseningtheplasticnutandslidingthe

switchintothewidenotchintheShroud

o Inserttheotherendoftheverticalmemberor1/2"PVCpipeintotheShroudwiththesensor

suchthattheLevelSensor’s

cordwillcomeoutoftheBOTTOMoftheShroudwhenhungonthe

tank.

o RemoveanypackingfoamortapefromtheLevelSensor

o PlacetheremainingShroudCoverontothelowerShroudtoprotecttheLevelSensorifdesired

o InstallSuctionCupsontothelowerShroud

ifdesired

o Hangtheassemblyoverthelipofthetankandadjustthehangerwidth

o AdjusttheheightoftheShroud/Switchtothemaximumdesiredwaterlevel

o SecureSuctionCupstothetankwall

 Youcanmixandmatchtheaboveinstallationmethods

tosuityouraquariumsystems’specificneeds



5. ConnecttheComponents



NOTE:ALLWIRESSHOULDHAVEADRIPLOOPTOPREVENTWATERFROMENTERINGTHECONTROLMODULE



 PlugintotheControlModuletheharnessfromtheMeteringReservoirthatwillreceivewaterfromyour

aquariumsystem(thewaste

water).Thisharnessplugsintothe6‐pinreceptacleonthelowerright‐handside

(asyouarelookingatthebackoftheControlModule).

 PlugintotheControlModuletheharnessfromtheMeteringReservoirthatwillreceivewaterfromyour

replacementwaterbin.Thisharnessplugsinto

the6‐pinreceptacleonthelowerleft‐handside(asyouare

lookingatthebackoftheControlModule).

 Ifused,plugtheaquariumorsump’sLevelSensorcableintothe2‐pinreceptacleonthelowerright‐handside

(asyouarelookingattheback

oftheControlModule).

 Ifused,plugthereplacementwaterbin’sLevelSensorintothe2‐pinreceptacleonthelowerleft‐handside(as

youarelookingatthebackoftheControlModule).

 IfcouplingyourRENEW™systemwithaSTORMautomatictopoffsystem(seeour

websiteforwhyyouwant

todothis!),plugthesuppliedcommunicationharnessintothecenter6‐pinreceptacleonthebackofthe

RENEW™ControlModule,andplugtheotherendintothecenter6‐pinreceptacleonthebackoftheSTORM

ControlModule.



6. Attach the 1/2”

 supply tubing on the replacement water’s Metering Reservoir to a pump and place the pump in the

replacementwaterbin.Cutthetubingtolengthifdesired.



7. Attachthe1/2”su pply tubingonthewastewater ’sMeteringReservoirtoapumpandplacethepumpinthea quariumor



sump.Cutthetubingtolengthifdesired.



8. Routethe5/8”tubingattachedtothereplacementwater’sMeteringReservoirbacktothereplacementwaterbin.The

tubingshouldbesecuredsuchthattheendofthetubingisjustabovethehighestwaterlevelinthebinandso

thatthe

waterwillrundownthesideofthebinasthewaterleveldrops.Doingsowillimprovewaterflowandreducenoisewhen

waterflowsbackintothereplacementwaterbin.Cutthetubingtolengthifnecessary.



9. Route the 5/8” tubing attached to the waste

 water’s Metering Reservoir back to the aquarium or sump.The tubing

shouldbesecuredsuchthattheendof thetubingisjustabovethewaterlevelandsothatthe waterwillrundownthe 

side.Doing so will improve water flow and reduce noise when water flows back

into the aquariumor sump. Cut the

tubingtolengthifnecessary.



10. Route the 1/2" tubingattached to the valve on the replacement water’sMetering Reservoir to the aquarium orsump.

The end ofthe tubing should be secured such that theend of the tubingis just above

the water level  and so that the

waterwillrundowntheside.Doingsowillimprovewaterflowandreducenoisewhenreplacementwaterflowsintothe

aquariumorsump.Cutthetubingtolengthifnecessary.



11. Routethe1/2"tubingattachedtothevalveonthewastewater’sMeteringReservoirtoa suitablereceivingreceptacleor

drain.



 IMPORTANT:ALWAYS FOLLOW LOCAL PLUMBINGCODESWHEN CONNECTING TOOR

USING EXISTING PLUMBING. UNLAWFUL OR IMPROPER CONNECTION  OR USE CAN

RESULT IN PROPERTY DAMAGE, HEALTH RISKS, AND ENVIRONMENTAL RISKS. IF YOU

ARE UNCOMFORTABLE OR UNQUALIFIED WITH THIS TASK, SEEK THE ADVICE AND

SERVICEOFAQUALIFIED,LICENSEDPLUMBER.GENESISREEFSYSTEMS,LLCCANNOTBE

HELD LIABLE FOR ANY DAMAGES DIRECTLY OR

 INDIRECTLY RESULTING FROM

CONNECTIONTO OR USEOF EXISTING PLUMBING.WHENCONNECTING TO OR  USING

EXISTINGPLUMBINGYOUAREDOINGSOATYOUROWNRISK.



12. Plugthereplacementwaterpump’spowercordintotheACreceptacleonthebottomrightoftheControl Module(when

viewingthefrontof

theControlModule).Ensurethat adriploopisformedtopreventwaterfromenteringtheControl

Module!



13. Plugthewastewaterpump’spowercordintotheACreceptacleonthebottomleftoftheControlModule(whenviewing

thefrontoftheControlModule).Ensurethatadrip

loopisformedtopreventwaterfromenteringtheControlModule!



14. PlugtheControlModule’spowercordintoaGFCI‐protected110VACoutlet.Ensurethatadriploopisformedtoprevent

waterfromenteringtheControlModule!YouarenowreadytouseyourRENEW™AutomaticWaterChanging

System!



GettingtoknowyourRENEW™AutomaticWaterChangeSystem



1. Afterinstallingyoursystem,pluggingitin,andpreparing yourreplacementwater,turnontheRENEW™systembyusing

thepowerswitchonthefrontfaceoftheControlModule.Whenpoweris“ON,”theswitchwillilluminate.SeveralLED

indicatorsandthedisplaywillilluminatewhenthepower

isonaswell.



2. Therearefour userinputbuttonsontheControlModule.Startingontheleftandmovingtowardtheright,thebuttons

areMODE,START/PAUSE/CANCEL,andthenINCREASEandDECREASEontheright.Allarelabeledaccordingly.



3. DepressingtheMODEbuttonchangeswhetherthesystem

willperformawaterchangeoverthecourseofaday,aweek,

oronegallonafteranotheruntilcomplete.Forexample,ifyouwantperforma24gallonwaterchangeoverthecourseof

24hours,usetheINCREASEandDECREASEbuttonsuntilthedisplayreads“24”andthen

presstheMODEbuttonuntilthe

indicatornextto“DAY”isilluminated.WhentheSTARTbuttonisdepressed thesystemwillstartasequenceof24one‐

gallon water changes, with 1 one‐gallon water change performed every hour (24 hrs/day divided by 24 gallons).

Changingthemodeto “WEEK” will

stretchthe24 gallon waterchangeoverthetimespan ofoneweekbyperforminga

one‐gallon water change every 7 hours (168 hrs/week divided by 24 gallons).Finally, changing the mode to

“CONTINUOUS” and pressing the START button would result in a one‐gallon water change followed immediately by

anotherone‐gallonwaterchange,foratotalof24changes.

4. The START/PAUSE/CANCEL button is the primary control button for the RENEW™ system.Momentarily pressing and

releasing the button will start  asequenceof water changes.Momentarilypressing and releasing thebutton during  an

activesequenceofwaterchangespauses

thesequenceuntilpressedagain,atwhichtimethesequenceofwaterchanges

will resume.Pressing and holding the button for between three and five seconds will permanently cancel an active

sequenceofwaterchanges.Pressingandholdingthebuttonforfivesecondsorlongerwillpermanentlycancelanactive

sequenceofwaterchangesandwillorderthesystemtoemptytheMeteringReservoirs.



The START/PAUSE/CANCEL buttonis the only buttonthat is activeduring a sequenceof water changes.Once a water

changesequencehasbeenstarted, the system will ignoreinputfromtheotherthreebuttons until the

waterchangeis

canceledorhascompleted.



5. TheINCREASEandDECREASEbuttonssimplychangethenumberofgallonstobechanged.

6. Pressing and holding the MODE and START/PAUSE/CANCEL buttons simultaneously for five seconds accesses the

OperationSettingsfortheRENEW™system.Thesesettingsallowtheusertoset

thetypeofsystemthattheyhave(Basic,

Advanced, or Pro), andare generally not needed afterthe system is initially installed unless the systemis upgradedto

includeadditional levelsensors.OnceinOperationSettings,theINCREASEandDECREASEbuttonsareusedtoselectthe

operation mode.Basic (“b”) mode

 is the default andwill need to be changed if you have an Advanced or Pro model.

Basicmodedoes not monitor level sensorinput.Advanced (“A”) mode monitors thetwostandalone level sensorsthat

are placed inthe sump (or aquarium) andreplacement bin.Pro models can be run

in two different operating modes:

standard (“PS”) orabbreviated(“PA”).Pro Standard operatingmodewill monitor all six possible level  sensorsand will

adjustthecycletimesbasedonthereservoirlevelsensors’inputs,andwillincludetheStandbystageaftereachDispense

stage.Pro Abbreviated operation will function similarly, but

 will skip the Standby stage and immediatelystart another

cycle when in Continuous mode.Skipping the Standby stage allows the system to exchange a volume of water more

quickly,butdoesnotallowthewaterjustreplacedtomixwiththeentireaquariumvolumeasthoroughly.



7. Thepowerswitch

canbeusedatanytimetoquicklysh utoffyourRENEW™systemandisequippedwithathermalcircuit

breakerthatwillautomaticallyshutdownthesystemifitdrawsmorethan10amps.



ExampleofOperation



Let’sassumethatyouwantyourRENEW™systemtoperforma15percentwaterchangeonyour90gallonaquariumwitha10

gallonsump.Let’salsoassumethatyouwantittoperformthechangeinasshortatimeaspossible.



Sinceyourtotalwatervolumeis100

gallons,you’llwanttoperforma15gallonwaterchange:

1. UsingtheINCREASEand/orDECREASEbuttons,adjustthevalueintheGALLONSwindowto“15”



SinceyouwantyourRENEW™systemtoperformthewaterchangeasquicklyaspossible:

2. UsingtheMODEbutton,select“CONTINUOUS”mode



Nowallyouhavetodoistellittogo!

3. PresstheSTART/PAUSE/CANCELbutton



It’sthatsimple!!!YourRENEW™systemwillperform15one‐gallonwaterchangesoneaftertheother.IfyouhaveanAdvancedor

Promodel,itwillevenmonitorthewaterlevelsinyour

sumpandreplacementwaterbin,andalertyouifeitherstraysoutsideyour

setlevels.Plus,ifyouhavethePromodel,theRENEW™systemwillmonitoritsownoperationandautomaticallyinterruptawater

changeandalertyouifitdeterminesthatsomethingisn’tquiteright–offeringtheultimatepeaceofmind!



Feelfreetoexperimentwiththesettingsonyour

RENEW™systemtofindoutwhatbestsuitsyourneeds.Ifyouever“getlost,”and

wanttogetbacktothefactorydefaultsettings,simplyturntheunitoff,presstheINCREASEandDECREASEbuttonssimultaneously,

andwhilestillholdingthemturntheunitbackon.YourRENEW™systemwill

resetitselftothefactorydefaults.



InterruptingandCancelingaWaterChangeSequence



IfyoueverneedtopauseyourRENEW™systemwhileitisinanactivewaterchangesequence,simplypressandreleasethe

START/PAUSE/CANCELbutton.Thecurrentstageindicatorwillblinktoindicatethatthesystemispaused.Toresumethesequence,

simplypressandreleasethebuttonagain,and

yourRENEW™systemwillcontinueuntilcompleted.



Ifyoueverneedtopermanentlycancelasequence,pressandholdtheSTART/PAUSE/CANCELbuttonfor3seconds.Thestage

indicatorswillblinktoindicatethatyou’vecanceledthesequence.Youcanalsocancelasequenceanddispensethecontentsofthe

Metering

ReservoirsbypressingandholdingtheSTART/PAUSE/CANCELbuttonfor5seconds.Thestageindicatorswillblinkafter

holdingthebuttonforthreesecondstoindicatethatthecyclehasbeencanceled,andwillopentheMeteringReservoirvalvesafter

5secondstodrainanywatercontainedwithinthem.



InteractionwiththeGenesisSTORM™SpecializedTopOffandReplenishmentModule



YourRENEW™canbeconn ectedtoaGenesisSTORM™SpecializedTopOffandReplenishme ntModuletoallowbothunitstobe

installedinanaquariumsystemandworktogetherwithoutmanuallydisablingtheSTORM™.TheSTORM™willnotattempttotop

offthesumporaquariumanytimetheRENEW™

unitisactivelyperformingawaterchangecycle.ThispreventstheSTORM™from

attemptingtoreplacethewastesaltwaterremovedbytheRENEW™systemwithfreshwater.Doingsowouldadverselyaffect

salinityinasaltwateraquariumandcouldeventuallyresultinoverflowingthesumpineitherafreshwaterorsaltwater

aquarium.

TheRENEW™willindicatethatitdetectstheSTORM™viatheindicatorsinthelowercenterportionoftheControlModule,andwill

illuminatewhenitisdisablingtheSTORM’s™topofffunctionsaswell.



Troubleshooting

YourRENEW™AutomaticWaterChangeSystemisdesignedtopro videyearsofreliableservice.Thefollowingtabledescribessome

typicalsymptoms,reasons,andsolutionstosituationsthatyoumayencounter.Ifyoustillhavedifficultyorquestionsaboutyour

RENEW™system,pleasecallourcustomerservicelineoremailourcustomer

carerepresentativesforfurtherassistanceat

[email protected].Pleasehaveyoursystem’sserialnumberavailablewhenyoucallandprovideitwithany

correspondencesowemaybetterhelpyou.TheserialnumbercanbefoundonthebackoftheControlModule.



Symptom PossibleReason Solution

NoindicatorsareilluminatedonControl

Moduleandpushinganybuttonproduces

noresult

1.NoPower



2.UnitisnotturnedON



1.EnsureControlModuleisfirmly

pluggedinto110VACreceptacle.

Checkelectricalsupply’sbreakeror

fuse

2.MakesurePowerButtonisintheON

position

The“SumpLevel”and/or“BinLevel”LED

indicatorsblinkandsystemhaltsnormal

function,withablinkingstageindicator

1.Waterlevelsaretoolow



2.LevelSensorsarenotpluggedin



3.RENEW™Basicunitisconfiguredto

operatein“Advanced”or“Pro”modes



4.FaultyLevelSensor

Topoffsumpand/orrefillreplacement

waterbin;afterward,press

START/PAUSE/CANCELbuttonto

resumeoperation

2.CheckLevelSensorconne ctionson

ControlModule;afterward,press

START/PAUSE/CANCELbuttonto

resumeoperation

3.Reconfiguresystemtooperatein

“Basic”mode(see“Gettingtoknow

yourRENEW™AutomaticWater

ChangeSystem”)

4.Manually

slidefloatalongsensorshaft;

ifnochange,replaceLevelSensor

The“ReservoirHigh”LEDindicatorblinks

andsystemhaltsnormalfunction,witha

blinkingstageindicator

1.TheMetering Reservoirwasnotfilled

within75secondsduringtheFillStage



2.LevelSensorsarenotpluggedin



3.FaultyLevelSensor

1.Ensurethatpumpiscapableoffilling

theMeteringReservoirwithin75

secondsatmountingheight.Also

makesurethattherearenokinksin

tubingdeliveringwatertoReservoir,

andthatinletvalves(ifused)are

open.

2.CheckReservoirconnectionson

ControlModule;afterward,press

START/PAUSE/CANCELbuttonto

resumeoperation

3.Manuallyslidefloatalongsensor

shaft;

ifnochange,replaceLevelSensor

The“ReservoirLow”LEDindicatorblinks

andsystemhaltsnormalfunction,witha

blinkingstageindicator

1.TheMeteringReservoirwasnot

emptiedwithin90secondsduringthe

DispenseStage

2.LevelSensorsarenotpluggedin



3.RENEW™BasicorAdvan cedunit is

configuredtooperatein“Pro”mode



4.FaultyLevelSensor



1.Examinedraintubingtoensurethat

therearenokinksblockingflow



2.CheckReservoirconnectionson

ControlModule;afterward,press

START/PAUSE/CANCELbuttonto

resumeoperation

3.Reconfiguresystemtooperatein

“Basic”or“Advanced”mode(see

“GettingtoknowyourRENEW™

AutomaticWater

ChangeSystem”)

4.Manuallyslidefloatalongsensorshaft;

ifnochange,replaceLevelSensor

TheMeteringReservoirdoesnot

completelyfillduringtheFillStage

1.Pumpisnotcapableofdeliveringone

gallonwithin75secondsatmounted

height

2.Tubingiskinked,inletvalveis

restrictingflow,orpump inlet is

blocked

1.Replacepumpwithhighercapacityor

lowerMeteringReservoir’smounting



height

2.Removeallkinks,openinletvalve,and

ensurepump’sinletisnotcloggedor

blocked

TheMeteringReservoirdoesnot

completelyemptyduringtheDispense

Stage

1.MeteringReservoirismountedtoolow



2.Tubingiskinkedorflowisotherwise

impeded



3.Endofoutlettubingissubmerged

belowwaterinsumporwaste

receptacle



4.Wastelineispressurized

1.RelocateMeteringReservoirsuch

that

itisalwaysabovethemaximumwater

levelofthesumporwastereceptacle

2.Removeallkinksorobstructionsand

removeallvalvesfromoutlettubing.

CheckoutletinsideMetering

Reservoirforblockage

3.Cutandmountendofoutlettubing so

thatitisjustabovethe

maximum

waterlevelofthesumporwaste

receptacle

4.Outletonwastesideisconnectedtoa

blockedorotherwisepressurized pipe.

Immediatelyseektheadviceofa

licensedplumberifyouarenot

qualifiedtoperformplumbingrepairs!

TheMeteringReservoiroverflowsduring

FillStage

1.PumpcapacitytoohighforReservoir

mountingheight



2.MeteringReservoirismountedtoolow



3.Endofreturntubingissubmerged

belowwaterinsource



4.Returntubingisroutedabovetopof

MeteringReservoir

1.Replacepumpwith

lowercapacity,

decreaseflowthroughinlettubing

usingaflowvalve,orincrease

MeteringReservoir’smountingheight

2.IncreaseMeteringReservoir’s

mountingheightsothattheentire

Reservoirisabovethemaximum

waterlevelofthesumpor

replacementwaterbin

3.Cutandmountendofreturntubingso

that

itisjustabovethemaximum

waterlevelofthesource

4.Routereturntubing suchthatitnever

goesabovethebottomofthe

Reservoir

TheMeteringReservoircontinuestofill

afterFillStageiscomplete

1.MeteringReservoirismountedbelow

waterlevelinsource(sumpor

replacementbin),andasiphonhas

beencreated

1.RaiseReservoirmountingheightto

ensureitisalwayscompletelyabove

themaximumwaterlevelofthe

source

PumpdoesnotturnonduringFillStage 1.Pumpneedsmaintenanceor

replacement

1.Unplugpumpandclearobstructions

fromimpeller(removeandcleanif

possible).Ifproblempersists,replace

pump

WaterflowingoutofMeteringReservoirs

createstoomuchnoise

1.Loudbubblingnoiseisheard.Endof

tubingissubmergedbelowwater

level.



2.Loudsplashingnoiseisheard.Endof

tubingistoohighorwaterisflowing

directlyintowatervolume.

1.Cutandmountendof

tubingsothatit

isjustabovethemaximumwater

level,suchthatthestreamofwater

exitingthetubeflowsdowntheside

ofthereceptacle

2.Mountendoftubingsothatitisjust

abovethemaximumwaterlevel,such

thatthestreamofwaterexitingthe

tube

flowsdownthesideofthe

receptacle



Product Use

Many factors beyond Genesis Reef Systems’ control and uniquely within the user’s knowledge and control can affect the use and performance of a Genesis Reef

Systems product in a particular application. Given the variety of factors that can affect the use and performance of a Genesis Reef Systems product, the user is

solely responsible for evaluating the Genesis Reef Systems product and determining whether it is fit for a particular purpose and suitable for the user’s method of

application.

Limited Warranty

Genesis Reef Systems warrants for 6 months from the date of purchase that Genesis Reef Systems products will be free of defects in material and manufacture.

Genesis Reef Systems makes no other warranties, express or implied, including but not limited to, any implied warranty of merchantability or fitness for a particular

purpose. This limited warranty does not cover damage resulting from use or misuse of a Genesis Reef Systems product, workmanship in application, or application

or storage not in accordance with Genesis Reef Systems recommended procedures. This warranty does not apply to products not directly manufactured by Genesis

Reef Systems or consumable items that may degrade as part of normal use.

Limitation of

Remedies and

Liability

If the Genesis Reef Systems product is proved to be defective within the warranty period stated above the exclusive remedy, at Genesis Reef Systems’ option, shall

be to refund the purchase price of or to repair or replace the defective Genesis Reef Systems product. Genesis Reef Systems shall not otherwise be liable for loss or

damages, whether direct, indirect, special, incidental, or consequential, regardless of legal theory asserted, including negligence, warranty, or strict liability.



Genesis Renew Installation and Use Manual

Related papers

Other documents