2. PEMENOL
  3. ZK-MG
ZK-MG

PEMENOL ZK-MG, ZK-MG DC Motor Speed Controller Signal Generator User manual

  • Hello! I am an AI chatbot trained to assist you with the PEMENOL ZK-MG User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
www.amazon.com/shops/PEMENOL same[email protected]om
PEMENOL PWM DC Motor Speed Controller
Signal Generator Driver Module
Brief Intro:
The module is a high-power PWM DC motor governor. It can adjust the motor speed
by adjusting the duty cycle of the output signal. It can also adjust the output
frequency to match the frequency of the output signal to the motor frequency,
allowing the motor to work more stably. It can be widely used for drive motor/light
brightness controlling/speed controlling/signal generator, etc.
PS: This module is a PMW driver, not a voltage converter. It has no function to
change the output voltage, so the output voltage and input voltage are the same.
Product Highlights
Support ON/OFF output
Soft start function
Support set duty cycle
www.amazon.com/shops/PEMENOL same[email protected]om
Support set frequency
Adjustable digital encoder
Support reverse connection protection
Support parameter memory function
Instrument case
Parameters
Working Voltage
DC 5V-30V
Rated Current
5A
Peak Current
15A
Power
150W(Max)
Work Frequency
1KHz-99KHz
Frequency Accuracy
1%
Frequency Resolution
1KHz
Duty Cycle
0%-100%
Duty Cycle Resolution
1%
Work temperature
-40~85℃
Working Humidity
0%-95%RH
www.amazon.com/shops/PEMENOL same[email protected]om
How to use it ? Please note !!!
Connect the DC 5V-30V voltage
Press potentiometer to turn OFF output.
3Press and hold potentiometer to enter into parameter setting mode.
4Press potentiometer to select setting parameters.
5Rotate potentiometer to set parameter value.
6Set another two parameters as step3 and step4.
7Press and hold potentiometer to save parameters and quit setting mode to
normal display mode.
8Connect load as wiring diagram.
9Press potentiometer to turn ON output.
Potentiometer introduction:
*Press and hold means keeping press for more than 3 second.
* Default display duty cycle.
P-1 Normal display mode:
1>. Press potentiometer: Turn ON/OFF output signal.
2>. Press and hold potentiometer: Enter parameter setting mode.
3>. Rotate potentiometer clockwise: Increase duty cycle value.
1
2
www.amazon.com/shops/PEMENOL same[email protected]om
4>. Rotate potentiometer counterclockwise: Decrease duty cycle value.
P-2 Parameter setting mode:
1>. Press potentiometer: Select the parameter you want to set including
Lower Limit Value of duty cycle, Upper Limit Value and Output Frequency,
which could be switched by yourself. *Note: The
lower limit
of the duty
cycle is displayed as "L" + two digits; The
upper limit
of the duty cycle is
displayed as "H" + two digits or "100"; And the
operating frequency
is
displayed as "F" + two digits.
2>.Press and hold potentiometer: Save parameter and quit setting mode to normal
display mode.
3>.Rotate potentiometer clockwise: Increase the setting value.
4>.Rotate potentiometer counterclockwise:Decrease the setting value.
: It is used to connect to an external switch button to turn
ON/OFF output if user need control output by another button or controller.
www.amazon.com/shops/PEMENOL same[email protected]om
Please read the user manual carefully before use, make sure that the parameters of
the device you are using are within the specified parameter range, and carefully check
whether the wiring method and setting method are correct.
Frequently asked questions
Q1：Why does this module cannot change the device voltage？
A1：The module is a PMW driver, which controls the controlled device by changing the
frequency and duty cycle of the output signal. It is not a voltage converter, it has no
function to change the output voltage.
Q2: Why is this controller not working ?
A2：Please check whether your wiring connection and the setting method
is correct, if there are still problems, don’t hesitate to contact us.
Q3: Why does this controller cannot be turned on?
A3: The potentiometer can be used as a switch to Turn ON/OFF output signal.
www.amazon.com/shops/PEMENOL same[email protected]om
*Please refer to the potentiometer introduction above for specific operations.
Q4: Why did the controller stop working after a period of use?
A4: It may be a short circuit. Please check your wiring diagram carefully for correct
connection, if there are still problems, don’t hesitate to contact us.
Package Listing:
1>.1pcs High-Power PWM DC Motor Speed Controller
After-Sales:
*We have always been keen to provide customers with the best quality service at the
most competitive price.
*Looking forward to get progress and growth with all of you.
*For more product questions and inquiries, please send your advice to
[email protected]
*Thank you for your purchase!
/