Page is loading ...
User ManualUser Manual
Semi Oval Silver Floor Display Case
SKU: SO209MSV
2
PARTS LIST
PART QUANTITY
A: Screw ............................................................................................................... 4
B: Shelf Support ................................................................................................. 16
C: Door Hinge ...................................................................................................... 2
D: Lock with Key................................................................................................... 1
E: Wire Support ................................................................................................... 4
If you have any questions regarding our products, please visit us at www.displays2go.com or
contact Displays2go customer service at 844-221-3388.
Scan QR code
to visit product
page
Tool Needed: Screwdriver
A. B. C.
D. E.
3
Fig. A
1. Put the base on the floor.
2. Assemble the showcase with the top and screw
the metal wires on the base (FIG.A)
Fig. 1
Fig. 2
4
Fig. B
Fig. C
3. Insert the metal wires into the holes on the
top (FIG.B)
4. Screw from the top to adjust the metal wires
(FIG.C).
Fig. 3
Fig. 4
5
Fig. D
mirror
Fig. G
Fig. F
Fig. E
5. Adjust the shelf holders to the desired height
(FIG.D) and then put the shelves.
6. Attach the hinge (FIG.E) and the lock (FIG.F)
to the door. Put the bottom hinge into the base’s
hole and insert the door into the upper hinge
(FIG.G) fixing it with proper screws. Two persons
are required for this final operation. Adjust the
door and then secure it.
Fig. 5
Fig. 6
6
CONTACT INFORMATION:
www.displays2go.com
PHONE: 844-221-3388
SIDE SPOTLIGHT UPON REQUEST (art. 4/LT9)
Unfasten the screws, insert the spot light’s rod into the
proper hole and then fasten it.
At point 4 remember to insert the electric wire before
fixing the rod.
The assembly is finished.
Enjoy your new
display case!
/
