2. Displays2go
  3. IPEDGE129

Displays2go IPEDGE129 Operating instructions

  • Hello! I've reviewed the assembly instructions for the Navigator EDGE-LIT iPad stand. This document outlines the steps for setting up your new stand, including attaching the base, mounting the tablet enclosure, connecting the power, and using the remote control for the LED lighting. I am ready to answer your questions about the assembly process and features of the stand.
  • What tools do I need for assembly?
    How do I pair the remote control?
    Can I place the tablet in portrait or landscape?
Assembly Assembly
InstructionsInstructions
NAVIGATOR NAVIGATOR
EDGELIT IPAD EDGELIT IPAD
STANDSTAND
SKU: IPEDGEWHTSKU: IPEDGEWHT
Scan QR code to
visit product page!
2
PART QUANTITY
A: Stand .................................................................................................................1
B: Base ...................................................................................................................1
C: Tablet Enclosure ...............................................................................................1
D: Remote Control ................................................................................................. 1
E: Keys for Tablet Enclosure .................................................................................2
F: Keys for Back Panel ..........................................................................................2
G: Base Screws .....................................................................................................6
H: Enclosure Screws .............................................................................................4
I: Allen Wrench .....................................................................................................1
J: Furniture Pads ..................................................................................................... 4
PACKING LIST
Tools Required: Screwdriver (not included)
If you have any questions regarding our products, please visit us at www.displays2go.com or
contact Displays2go customer service at 844-221-3388.
3
DESCRIPTION OF PARTS
ASSEMBLY
1. Assemble Base
Flip base (B) upside down. Add furniture pads (J) to each corner.
Next, use screwdriver and base screws (G) attach the base to the stand (A).
4
2. Attach Tablet Enclosure
3. Connect Tablet
4. Connect to Power
Unlock the tablet enclosure (C). Use enclosure
screws (H) to affix tablet enclosure to the bracket.
Tighten screws with allen wrench (I).
NOTE: The tablet enclosure can be attached while
in portrait or landscape orientation.
Place your tablet in the enclosure.
Connect your charging cable to the tablet, and
insert the other end through the charging cable slot
on enclosure, feeding the cable into the stand.
Close and lock the enclosure with the enclosure
keys (E).
Unlock the back panel with keys (F).
Plug tablet charging cable into fixed power outlet
inside stand.
Plug power cord into wall.
5
REMOTE CONTROL
Eny r w t n!Eny r w t n!
CONTACT INFORMATION:
www.displays2go.com
PHONE: 844-221-3388
Aim the remote control directly at the LED strip when using the remote control.
If remote control does not initially control the LED strip, hold the ON key down for 5 seconds to pair.
The lights flash slowly to indicate successful pairing.
/