Displays2go SMCMCGRSD Assembly Instructions

Brand: Displays2go

Model: SMCMCGRSD

Type: Assembly Instructions

Digital Screen

#10-24 Nut X6

1. Attach the digital panel to the Mounting Bracket (C) with 6 #10-24

Nuts (G).

1/4-20x1.5”

Flat Washer

#8x.75” Screw X36

#8x.75” Screw X24

1/4-20x.5” Screw X4

Furniture Pad

Bottom Side

E x3

A x1 B x1 C x1

3. Attach (3) Bottom Boards (E) one by one using #8x.75 Screws (J)

as shown below.

NOTE: The bottom side has furniture pads attached.

2. Connect the Left Shelf (A) and the Right Shelf (B) with Middle Rod

(D) in the middle. Secure the Rod and shelves using (3) 1/4-20x1.5”

Screws (H) and (3) Flat Washers on each end.

4. Attach the mounting bracket with digital screen to 1 Top Board (F),

then place it on top of the assembled display unit. Secure the bracket

using (2) 1/4-20x.5” Screws (K) on each side.

D x1 E x3 F x2

G x6 H x6 I x6 J x60 K x4

#10-24 1/4-20x1.5” Flat Washer #8x.75” 1/4-20x.5”

5. Fix the 1st top board in the center with (12) #8x.75 Screws (J). `

Fix the other top board with the remaining #8x.75 Screws (J).

Connect the power cord with the digital screen and plug the adapter

into the power outlet.

INSTALLATION INSTRUCTIONS

SMCMCGRSD - Classic Modern Collection Digital Fixture

If you have any questions regarding our products, please visit us at www.displays2go.com or contact D2G customer service 844-221-3388.

NOTE:

Cord management bars

are provided for this

unit. These bars can be

attached at any location

on the unit, using the

adhesive backing. Cord

can be slotted in to keep

neat.

Displays2go SMCMCGRSD Assembly Instructions

Displays2go SMCMCGRSD Assembly Instructions

Displays2go SMCMCGRSD Assembly Instructions

Related papers

Other documents